|
|
|
|
 |
 
|
 |
BMW Garage | BMW Meets | Register | Today's Posts | Search |
 |
|
BMW 3-Series (E90 E92) Forum
>
Would this Bilstein B4 kit work with my '09 E91 XI?
|
 |
| 07-15-2022, 03:48 PM | #1 |
|
New Member
9
Rep 21
Posts |
Would this Bilstein B4 kit work with my '09 E91 XI?
My '09 auto e91 with xDrive came with ST-coilovers (2020) and the front/rear were too low (tires looked like they were touching the fenders) and I bought a spanner. However, my indy only was able to raise the front by about 1" (what I asked, and it turned out adequate) and was not able to raise the rear.
Also, I find the ST-coilovers to be too stiff/harsh with even small potholes, great on perfect roads. Therefore, I am looking at a set of suspension refresh kit (my car has 153k miles) for my car used as a daily driver. I found this kit but e91 328 xi was not listed as compatible. https://www.fcpeuro.com/products/bmw...RoCWv4QAvD_BwE Any thoughts and help/advice? Appreciate it-Hoi |
 |
| Bookmarks |
|
|
