[f82_spooly]

Is there a list that that has the different things you can code to a 335i as far as options and other things using Protools?

[tony55343]

I'd like to know as well. All I currently have coded is digital speed , and coded out the tpms system.

[gamesfrager]

- if you have electric folding side mirrors; then fold with keyfob is nice to have
- rollup windows with keyfob
- I did fogs and rear fog as welcome ligh
- instant mpg on cluster
- increased lights voltage (poorman's Lux?)
- 5 blink turn signal
- double impulse hazard (euro hazard)

[Pinscher]

What ever you do, do don't buy Carly. I had a 328 and you had to trial and error everything with is a PITA since it's sooo slow.

I thought things would be different with a 335, but I was wrong. Carly is just horrible. It doesn't do what you want it to, most of the time, and you end up trail and error everything.

For example, to get 5 clicks on my flash to pass it took 3 writes and restarts. Why 3? i dunno why, i was only setting 1 value.

Then during another coding event my reverse tilt stopped working, even though I didn't code anything with the mirrors. Fixing it with Carly doesn't seems to do anything useful as after three tries i just opted to give up.

Lastly, trying to set my Angle eyes on the 328 was almost straight forward, just disable DRL and it leave the angle eyes on, but on the 335 I can't get the hazard lights to turn off. doesn't matter what settings i use, they hazards are stuck on, and that makes the angle eyes look stupid, so basically my car looks stupid.

Carly is literally one of the most disappointing Technology type purchases I've ever made.

[King Rudi]

I coded mine to make french toast when I unlock the doors. Inconvenient I must say but damn if my car doesn't smell delicious with the lingerings of cinnamon.

[gbalthrop]

Although Rudi's code is almost certainly NOT to be found, try NCS Dummy. Install, Connect, save TRC file, review what Options are currently selected, decipher other options available, check NEW option boxes.

It shows you what Options are currently selected in each module, AND
It shows you a Menu of Options you may alternately select.

Anyone know anything simpler, easier? OK, a Cinnamon stick, right Rudi?

George

[King Rudi]

Originally Posted by gbalthrop

Although Rudi's code is almost certainly NOT to be found, try NCS Dummy. Install, Connect, save TRC file, review what Options are currently selected, decipher other options available, check NEW option boxes.

It shows you what Options are currently selected in each module, AND
It shows you a Menu of Options you may alternately select.

Anyone know anything simpler, easier? OK, a Cinnamon stick, right Rudi?

George

I'm telling you, Carly's french toast is Ah-Maz-Ing!