|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Cruise control Retrofit issues with SZL
|
|
11-27-2020, 12:18 PM | #23 |
Captain
278
Rep 657
Posts |
You will run into problems using ISTA P with used modules. Just change the vin in the LDM with tool32 then default code with NCS
|
Appreciate
0
|
12-03-2020, 01:09 PM | #24 |
Private First Class
21
Rep 126
Posts |
In NCS there are a few errors that are common. Also there is a file coapierror.eng Here is the important content:
1000 = Error 1001 = Invalid handle 1002 = Out of memory 1003 = Parameter erroneous 1004 = Buffer too small 1005 = COAPI error text file not found: 1006 = COAPI error text file %s has no version 1007 = COAPI error text file %s has version %s, COAPI version is %s 1008 = Invalid language suffix "%s" 1010 = The High Performance Timer is not available (Windows ErrorCode %s), falling back to normal windows timer 1011 = The counter of the High Performance Timer could not be read (Windows ErrorCode %s) ; 1020..1039: File errors 1020 = File could not be opened for reading 1021 = File could not be opened for writing 1022 = Error during reading from file 1023 = Error during writing to file 1024 = Calling paramter of a coapi function erroneous 1025 = Configuration file %s not found ; 1040..1059: File processing errors (Syntax errors) 1040 = Error in file processing (general) 1041 = Error in ZST file processing 1042 = Error in CVT file processing 1043 = Error in CBD file processing 1044 = Error in SGET file processing 1045 = Error in SWT file processing 1046 = Error in ZCSUT file processing 1047 = Error in VM program generation ; 1060..1079: CABD file processing errors (Syntax errors) 1060 = Error in coding sequence description file (CABD) 1061 = CABI was not initialized 1062 = CABD result error (CABD result parameter) 1063 = CABD parameter error (CABD calling parameter) 1064 = Internal error in CABD job found 1065 = coding sequence description file (CABD) %s not found or erroneous ; 1080..1099: Codingkey- and Vehicle identification number errors 1080 = Coding key invalid 1081 = GM key invalid 1082 = SA key invalid 1083 = VN key invalid 1084 = AM key invalid 1085 = VIN invalid 1086 = Type series identifier invalid ; 1100..1119 1100 = The ECU is not covered by ECU detection ; 1120..1139 1120 = Unused coding data found ; 1140..1159: Keyword errors 1140 = ASW invalid 1141 = FSW invalid 1142 = PSW invalid 1143 = ECU short identifier invalid ; 1160..1160: Individualization 1160 = no Individ-FSWs found ; 1170..1179: SGVT errors 1170 = ECU was excluded (disabled) 1171 = General error in SGVT sequence ; 1180..1189: AT errors 1180 = vehicle job is invalid 1181 = General error in AT sequence ; 1190..1199 BSU errors 1190 = Bootsectorupdate not possible (maybe not necessary either) 1191 = The bootsector in the ECU already matches target-HW* and target-ECU-Family ; 2000..2019: EDIABAS and SGBD-Call-/Resulterrors 2000 = Error in EDIABAS or in ECU description file (SGBD) 2001 = EDIABAS was not initialized 2002 = Unexpecte EDIABAS result 2003 = EDIABAS parameter error (SGBD parameter) 2004 = EDIABAS parameter error, special: binary buffer 2005 = Internal error in SGBD job found 2006 = EDIABAS language file %s not found ; 2020..2039: ECU communication errors 2020 = ECU does not answer 2021 = Datatransmission to ECU disturbed 2022 = Battery voltage low or not present 2023 = Invalid answer telegram 2024 = Error baudrate not readable 2025 = Error on clear diagnostic information ; 2040..2059: ECU identification errors 2040 = Wrong ECU identification (general) 2041 = Wrong ECU coding index 2042 = Wrong ECU hardware number 2043 = Wrong ECU software number ; 2060..2079: Coding errors 2060 = Coding erroneous (general) 2061 = Error on writing coding data 2062 = Error on reading coding data 2063 = Error on comparing/verfying coding data 2064 = Error on deleting coding data (e.g. ZCS) 2065 = ECU checksum error ; 2080..2099: Programing errors E65 ( TI435, Herr Drexel ) 2080 = Programming state invalid 2081 = Authentification failed 2082 = Clear flash failed 2083 = Prepare flash download failed 2084 = Flash download failed 2085 = Flash download completion failed 2086 = Signature check failed 2087 = reading UIF failed 2088 = writing UIF failed 2089 = switching programming mode failed 2090 = Authentification format error 2099 = CPU type invalid ; 3000..3050: COAPIKF internal errors 3000 = Assembly identification number not found in the files determined by "xxkfconf.da2" 3001 = Coding error on clear flash 3002 = Error on clear flash 3003 = Error U-Batt on clear flash 3004 = Error on comparing the ISN of the DME and the 3005 = Error on reading the ISN 3006 = Error, different start values 3007 = Error, unknown EWS interface 3008 = Error, manual gear 3009 = PS10 InitString not found 3010 = VERSIONKFCONF not in Zusbau 3011 = Reference ECU identifier 3012 = Reference project 3013 = Reference program 3014 = Reference project version in new ECU 3015 = Reference not found in file (e.g. GD834) 3016 = API32.DLL could not be loaded 3017 = coapiKfInit() failed 3018 = apiInit() failed 3019 = Reference could not be read from ECU (EMS2000) 3020 = ECU not found in PrgIfSel file (not necessarily an error) 3021 = general EWS error 3022 = A mandatory global parameter was not set 3023 = The PABD had no job for setteing the global diagnostic address. 3024 = KFCONF not found. 3025 = SgMember not found 3026 = End of file reached 3027 = INFO file not found ; 3051..3099: COAPIKF internal errors of module: Import/Export-Configuration 3051 = Directory could not be opened: 3052 = Directory could not be created: 3053 = Error on writing the export log file 3054 = Error on analysing the development files 3055 = Error on analysing the tool relevant data 3056 = Error on analysing the assembly line data 3057 = Error on analysing the KMM files 3058 = Error on copying the development files 3059 = Error on copying tool relevant data 3060 = Error on copying assembly line data 3061 = Error on copying KMM files ;4000..4199: Errorcodes in DAT- Module ( Access to logistic files of Kennfeldprogrammierung ) 4000 = A pointer parameter was a NULL pointer 4001 = Invalid paramter 4002 = File not found 4003 = Error on opening output file 4004 = Error on reading file 4005 = Error on writing file 4100 = Error in dlo- or rec-modules 4101 = Error on conversion ASCII->Hex 4102 = needed Number %s not found in file %s 4103 = Error at symbolic placeholders 4104 = invalid calling parameters 4105 = no more entry in NWNR.DME/AGS/DAT available ;4200..4300: Errorcodes ATB-Module 4202 = Format syntax error 4203 = Overflow 4204 = File %s not found 4205 = File %s could not opened for writing 4206 = Error on reading in file %s, line %s 4207 = Error on writing file 4208 = Wrong path 4209 = %s check sum wrong for this line: %s 4210 = Version error 4211 = String syntax error in file to be converted 4212 = Undefined character 4213 = Conversion error 4214 = Wrong conversion name 4215 = Allocation error 4216 = Too many records 4217 = Invlaid check name 4218 = Syntax error in def-file 4219 = Undefined key word 4220 = Unexpected end of block (maybe $REFERENZ is missing) 4221 = Conversion error in file %s, line %s 4222 = Number of blocks does not match $BLOCKANZAHL 4223 = Last line not equal to EOF-record 4224 = Converted data file has no UIF 4225 = Converted program file may not contain UIF ;4300..4400: Errorcodes REC-Module 4301 = End of file 4302 = File not found 4303 = Datei could not be opened for writing 4304 = Error on reading in file 4305 = Error on writing to file 4306 = Check sum error 4307 = Undefined paramater 4308 = Invalid parameter 4309 = Too many databytes per record 4320 = Version error 4321 = Record-ID error 4322 = Record format neither Fixed nor Short 4323 = Record-Type unknown( Not B(yte) or W(ord) etc. ) 4324 = Out of memory 4325 = Too many record-IDs ;4400..4600: Errorcodes NCK-Module (Coding) 4430 = Runtime error 4431 = Key word not activated 4432 = File not found 4433 = File could not be opened for writing 4434 = Error on reading file 4435 = Error on writing file 4436 = Line type error 4437 = Operator invalid 4438 = Key word invalid 4439 = Function key word invalid 4440 = Paramater key word invalid 4441 = Syntax error during conversion 4442 = Datalength invalid 4443 = Allocation error 4444 = Too many records 4445 = Coding index comparison failed 4446 = File names not equal 4447 = Error on analysing a record 4448 = Error on analysing a formula 4449 = COAPI_NCK_ANALYSE_AAD_ERR, Job expression invalid 4450 = Record-ID invalid 4451 = Error on reading ZCS 4452 = Error on writing a key word pair (List overflow) 4453 = Error on reading FSW / PSW 4454 = Key comparison failed 4455 = Record not found 4456 = Error on reading record 4457 = Error in job expression (AAD empty, ASW not set, invalid character in formula string) 4458 = Type series invalid 4459 = CVT invalid (Job expression not present, no true job expression found) 4460 = Syntax error in def file 4461 = Undefined key word 4462 = Undefined key ID 4463 = String length error 4464 = ZCS length invalid 4465 = Decode-Character invalid 4466 = Encode-Value invalid 4467 = No data in record 4468 = Error in record (unspecific error) 4469 = Key array size error 4470 = Error on reading job key word 4471 = Invalid file name in record 4472 = Basic coding, Clearance info invalid 4473 = Basic coding, Key word invalid 4474 = Assembly, Clearance info invalid 4475 = Assembly, Key word invalid 4476 = Change, Clearance info invalid 4477 = Change, Key word invalid 4478 = Supplementation, Clearance info invalid 4479 = Supplementation, Key word invalid 4480 = Part number, Clearance info invalid 4481 = Part number, Key word invalid 4482 = History, Clearance info invalid 4483 = History, Key word invalid 4484 = Checksum error 4485 = Filename invalid 4486 = Coding index invalid 4487 = HW number invalid 4488 = SW number invalid 4489 = Memory orginazation invalid 4490 = Delivery state invalid 4491 = Coding data group invalid 4492 = Manufacturer data group invalid 4493 = Reserved data group invalid 4494 = invalid unoccupied1 data group 4495 = invalid unoccupied2 data group 4496 = invalid parameter assignment FSW 4497 = invalid parameter assignment PSW1 4498 = invalid parameter assignment PSW2 (consecutive line of to PSW1) 4499 = invalid direct parameter assignment 4500 = Error at Identification K 4501 = Error at Identification D 4502 = Error at Identification X 4503 = Error at Identifications 4504 = Mask error 4505 = Value erroneous 4506 = found more than one true expression 4507 = ZUT-ID not found 4508 = Group invalid 4509 = Recoding failed (Changeover line for BR not found) 4510 = Recoding failed (Changeover line for ECU not found) 4511 = internal Error (ASW Array) 4512 = Job error 4513 = COAPI_NCK_SG_ID_INFO_ERR, internal error (ECU Array) 4514 = Job invalid 4515 = String error 4516 = Date comparison failed 4517 = Time error 4518 = invalid order line 4519 = Date error 4520 = Data limit error 4521 = Checksum error ;7000 - 7099 failure messages to differentiate failure timne and failure type 7000 = Start - <free> 7001 = Start - <free> 7002 = Start - no answer from ECU (IFH-0009) but gateway o.k. 7003 = Start - no answer from ECU an gateway (IFH-0009) 7004 = Start - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7005 = Start - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7006 = Start - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7007 = Start - EDIABAS NET-failure (150…199) 7008 = Start - EDIABAS API-failure (120…149) 7009 = Start - EDIABAS BIP/SYS/other failures (60…119, 200...) 7010 = ECU adresses are set - <free> 7011 = ECU adresses are set - <free> 7012 = ECU adresses are set - no answer from ECU (IFH-0009) but gateway o.k. 7013 = ECU adresses are set - no answer from ECU an gateway (IFH-0009) 7014 = ECU adresses are set - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7015 = ECU adresses are set - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7016 = ECU adresses are set - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7017 = ECU adresses are set - EDIABAS NET-failure (150…199) 7018 = ECU adresses are set - EDIABAS API-failure (120…149) 7019 = ECU adresses are set - EDIABAS BIP/SYS/other failures (60…119, 200...) 7020 = Ident read - <free> 7021 = Ident read - <free> 7022 = Ident read - no answer from ECU (IFH-0009) but gateway o.k. 7023 = Ident read - no answer from ECU an gateway (IFH-0009) 7024 = Ident read - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7025 = Ident read - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7026 = Ident read - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7027 = Ident read - EDIABAS NET-failure (150…199) 7028 = Ident read - EDIABAS API-failure (120…149) 7029 = Ident read - EDIABAS BIP/SYS/other failures (60…119, 200...) 7030 = Programming status read - <free> 7031 = Programming status read - <free> 7032 = Programming status read - no answer from ECU (IFH-0009) but gateway o.k. 7033 = Programming status read - no answer from ECU an gateway (IFH-0009) 7034 = Programming status read - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7035 = Programming status read - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7036 = Programming status read - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7037 = Programming status read - EDIABAS NET-failure (150…199) 7038 = Programming status read - EDIABAS API-failure (120…149) 7039 = Programming status read - EDIABAS BIP/SYS/other failures (60…119, 200...) 7040 = Programming mode started - <free> 7041 = Programming mode started - <free> 7042 = Programming mode started - no answer from ECU (IFH-0009) but gateway o.k. 7043 = Programming mode started - no answer from ECU an gateway (IFH-0009) 7044 = Programming mode started - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7045 = Programming mode started - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7046 = Programming mode started - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7047 = Programming mode started - EDIABAS NET-failure (150…199) 7048 = Programming mode started - EDIABAS API-failure (120…149) 7049 = Programming mode started - EDIABAS BIP/SYS/other failures (60…119, 200...) 7050 = clear flash done - <free> 7051 = clear flash done - <free> 7052 = clear flash done - no answer from ECU (IFH-0009) but gateway o.k. 7053 = clear flash done - no answer from ECU an gateway (IFH-0009) 7054 = clear flash done - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7055 = clear flash done - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7056 = clear flash done - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7057 = clear flash done - EDIABAS NET-failure (150…199) 7058 = clear flash done - EDIABAS API-failure (120…149) 7059 = clear flash done - EDIABAS BIP/SYS/other failures (60…119, 200...) 7060 = Data transfer done - <free> 7061 = Data transfer done - <free> 7062 = Data transfer done - no answer from ECU (IFH-0009) but gateway o.k. 7063 = Data transfer done - no answer from ECU an gateway (IFH-0009) 7064 = Data transfer done - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7065 = Data transfer done - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7066 = Data transfer done - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7067 = Data transfer done - EDIABAS NET-failure (150…199) 7068 = Data transfer done - EDIABAS API-failure (120…149) 7069 = Data transfer done - EDIABAS BIP/SYS/other failures (60…119, 200...) 7070 = Signature check done - <free> 7071 = Signature check done - <free> 7072 = Signature check done - no answer from ECU (IFH-0009) but gateway o.k. 7073 = Signature check done - no answer from ECU an gateway (IFH-0009) 7074 = Signature check done - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7075 = Signature check done - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7076 = Signature check done - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7077 = Signature check done - EDIABAS NET-failure (150…199) 7078 = Signature check done - EDIABAS API-failure (120…149) 7079 = Signature check done - EDIABAS BIP/SYS/other failures (60…119, 200...) 7080 = Programming status o.k. - <free> 7081 = Programming status o.k. - <free> 7082 = Programming status o.k. - no answer from ECU (IFH-0009) but gateway o.k. 7083 = Programming status o.k. - no answer from ECU an gateway (IFH-0009) 7084 = Programming status o.k. - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7085 = Programming status o.k. - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7086 = Programming status o.k. - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7087 = Programming status o.k. - EDIABAS NET-failure (150…199) 7088 = Programming status o.k. - EDIABAS API-failure (120…149) 7089 = Programming status o.k. - EDIABAS BIP/SYS/other failures (60…119, 200...) 7090 = UIF written - <free> 7091 = UIF written - <free> 7092 = UIF written - no answer from ECU (IFH-0009) but gateway o.k. 7093 = UIF written - no answer from ECU an gateway (IFH-0009) 7094 = UIF written - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7095 = UIF written - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7096 = UIF written - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7097 = UIF written - EDIABAS NET-failure (150…199) 7098 = UIF written - EDIABAS API-failure (120…149) 7099 = UIF written - EDIABAS BIP/SYS/other failures (60…119, 200...) ;7412 - 7439 failure massages in context with the DLE 7412 = OPPS-DLE: DLE status timeout - no answer from ECU (IFH-0009) but gateway o.k. 7413 = OPPS-DLE: DLE status timeout - no answer from ECU an gateway (IFH-0009) 7414 = OPPS-DLE: DLE status timeout - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7415 = OPPS-DLE: DLE status timeout - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7416 = OPPS-DLE: DLE status timeout - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7417 = OPPS-DLE: DLE status timeout - EDIABAS NET-failure (150…199) 7418 = OPPS-DLE: DLE status timeout - EDIABAS API-failure (120…149) 7419 = OPPS-DLE: DLE status timeout - EDIABAS BIP/SYS/other failure (60…119, 200...) 7422 = OPPS-DLE: DLE status interface error - no answer from ECU (IFH-0009) but gateway o.k. 7423 = OPPS-DLE: DLE status interface error - no answer from ECU an gateway (IFH-0009) 7424 = OPPS-DLE: DLE status interface error - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7425 = OPPS-DLE: DLE status interface error - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7426 = OPPS-DLE: DLE status interface error - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7427 = OPPS-DLE: DLE status interface error - EDIABAS NET-failure (150…199) 7428 = OPPS-DLE: DLE status interface error - EDIABAS API-failure (120…149) 7429 = OPPS-DLE: DLE status interface error - EDIABAS BIP/SYS/other failure (60…119, 200...) 7432 = OPPS-DLE: DLE status communication error - no answer from ECU (IFH-0009) but gateway o.k. 7433 = OPPS-DLE: DLE status communication error - no answer from ECU an gateway (IFH-0009) 7434 = OPPS-DLE: DLE status communication error - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most 7435 = OPPS-DLE: DLE status communication error - no answer from ECU an gateway (IFH-0009), no OPPS/Most 7436 = OPPS-DLE: DLE status communication error - EDIABAS IFH-failure (10…59, except IFH-0003 and IFH-0009) 7437 = OPPS-DLE: DLE status communication error - EDIABAS NET-failure (150…199) 7438 = OPPS-DLE: DLE status communication error - EDIABAS API-failure (120…149) 7439 = OPPS-DLE: DLE status communication error - EDIABAS BIP/SYS/other failure (60…119, 200...) ;Other failures in context with the DLE/OPPS: Number 7408 - 7444 7400 = OPPS: acquire OPPS-version/access 7401 = OPPS: set DNMT, engaging/swith-off 7402 = OPPS: acquire DLE-version and DLE-availability 7403 = OPPS: DLE-reset 7404 = OPPS: initialising DLE 7405 = OPPS: DLE STATUS failure 7406 = OPPS: DLE FIFO overflow 7407 = OPPS: DLE did not finish 7408 = OPPS-DLE: DLE_STATUS IFH failure 7409 = OPPS-DLE: DLE_STATUS NET failure 7410 = OPPS-DLE: DLE_STATUS API failure 7411 = OPPS-DLE: other DLE_STATUS failures 7440 = OPPS-DLE: ECU block programming not o.k. 7441 = OPPS-DLE: ECU block programming negative response 7442 = OPPS-DLE: ECU block programming false SID 7443 = OPPS-DLE: ECU block programming to short frame 7444 = OPPS-DLE: ECU block programming no frame ;other failure messages 7210 = ECU: reading ident 7211 = ECU: reading HW-references 7212 = ECU: reading ZIF 7213 = ECU: reading ZIF-Backup 7214 = ECU: process reset 7215 = ECU: reading times 7216 = ECU: maximum block length 7217 = ECU: reading serial number 7218 = ECU: reading random number 7219 = ECU: stop diagnosis 7220 = ECU: reading physical HW-number 7221 = ECU: reading internal temperature 7228 = P-SGBD: set flash parameters 7229 = P-SGBD: set diagnosis protocol 7900 = CCC: HOST reset 7901 = CCC: start FIB-create 7902 = CCC: FIB-create failed 7903 = CCC: HOST programming status not o.k. for programming application 7904 = MASK: MMI programming status not o.k. for programming |
Appreciate
0
|
12-03-2020, 01:14 PM | #25 |
Private First Class
21
Rep 126
Posts |
Have you tried to code CAS,DSC, KOMBI and DDE(if available) with $540 only in your FA, with the new, unmodified by you SZL?
|
Appreciate
0
|
01-12-2022, 01:45 AM | #26 |
Registered
0
Rep 3
Posts |
So Tomas321, how at the end you solve this then ?? i have exactly same year 2005, im a begginer, and i actually stuck in the same position as you.. i use the Z4 video on youtube to do it, but it did not work, ill try to add today $540 and remove $544 and see what happens... but still the failure codes that we must delete at the end with Tools32 are not getting deleted and they are so annoying ...
Thanks |
Appreciate
0
|
01-12-2022, 01:45 PM | #27 | |
Registered
0
Rep 3
Posts |
Quote:
But I did not understand something.. You went back to the first one you bought and code it again? Or you went back to the original one without CC and code and forget about this!? I’m asking becasue I’m also aE90 2005 .. put the SZL from a E91 2007 used but good.. and also any of my arms works (highlights or whiper ones) exactly like your VIDEO on you tube from the beginning. Please help me!! Thanks ! |
|
Appreciate
0
|
02-13-2022, 12:27 PM | #28 |
Private First Class
14
Rep 132
Posts |
Info
Hi all, just a quick note that I was able to take an ACC arm from an ebay SZL and add that arm to my original SZL for a 2012 X5 E70 LCI. It's just some screws and ribbon cable, and of course you have to be clean about it. You then code the DSC module since the SZL on this vehicle is the slave to the DSC. Hope this helps somebody.
|
Appreciate
0
|
07-30-2022, 08:36 AM | #29 | |
New Member
0
Rep 10
Posts |
Quote:
E87 LCI from 2010 with N47D20C enginer. Yesterday I successfully coded $540. Will $544 work on my car if I code that instead thanks? |
|
Appreciate
0
|
Bookmarks |
|
|