[N54 Junkie]

BTW, its been wayyyyyy to quiet in here.

[youngnastyman]

Originally Posted by tjobeid

has anyone in houston installed the JB4 themselves?

freaking piece of cake. lmk if u need someone to do it for you.

installed/deinstalled mine when i had a 335 like 900 million times.

[tjobeid]

Originally Posted by youngnastyman

freaking piece of cake. lmk if u need someone to do it for you.

installed/deinstalled mine when i had a 335 like 900 million times.

thanks you, after taken it apart 3 times now it became simple. Hehe.
Now i need someone in houston that has a meth kit for me to check out in person.

[tjobeid]

Originally Posted by Pearl335

BTW, its been wayyyyyy to quiet in here.

Hey, your in katy as well. saw you have a 335i as well. Any mods?

[tjobeid]

Originally Posted by kmeghtx

hi everyone,

can i get some opinions on this deal?

07 335i sedan 68,700 miles. CPO ends in July. 2nd owner, all service records in hand. no accidents. Sport and Navi, no cold weather pkg, auto. I would say its in good condition.

settled on $17,500.. is this a bad price?

too hight for a sedan. should be around 15-16max

[N54 Junkie]

Originally Posted by tjobeid

Hey, your in katy as well. saw you have a 335i as well. Any mods?

JB4, ER Chargepipe with HKS BOV, BMS DCI, Lux H8 V3.

Hoping to add AR DP and BMW Performance exhaust. I'd like to add some forgestar 19" concaves too, but 3k for wheels and tires is a bit much for me to stomach.

[tjobeid]

Originally Posted by Pearl335

JB4, ER Chargepipe with HKS BOV, BMS DCI, Lux H8 V3.

Hoping to add AR DP and BMW Performance exhaust. I'd like to add some forgestar 19" concaves too, but 3k for wheels and tires is a bit much for me to stomach.

Just curious why did you install the charge pipes before down pipes, I'm trying to find someone with meth or vrsf intercooler to check out or get opinion on.

[N54 Junkie]

Originally Posted by tjobeid

Just curious why did you install the charge pipes before down pipes, I'm trying to find someone with meth or vrsf intercooler to check out or get opinion on.

I got the CP simply because BMS had a sale that week and I wanted to get it cheap. Plus, I had a crack in the rubber elbow on the stock setup.

[tjobeid]

Anyone in Houston on here with a 335i with meth? i have a few questions to ask.

[N54 Junkie]

I dont do meth man. Sorry.

[Eiight]

anyone in or around Houston familiar with procede? i bought a 2.5SE new from vishnu and i've tried installing it like 7 times now, everytime i would get the half cylinder light (limp mode) unless i leave it on the 3rd map(naturally aspirated). if i disconnect everything and remove the procede my car is back to stock and everything is fine, but i hook it up it goes into limp mode with really rough idling(it dies sometimes) and no accelleration just lots of misfires and jerking. does anyone have experience with this kind of stuff?

[Cbertrand]

New member from Katy - been looking at 09 335 convertibles. Hope to purchase in the next few weeks.

[na foo]

Originally Posted by Eiight

anyone in or around Houston familiar with procede? i bought a 2.5SE new from vishnu and i've tried installing it like 7 times now, everytime i would get the half cylinder light (limp mode) unless i leave it on the 3rd map(naturally aspirated). if i disconnect everything and remove the procede my car is back to stock and everything is fine, but i hook it up it goes into limp mode with really rough idling(it dies sometimes) and no accelleration just lots of misfires and jerking. does anyone have experience with this kind of stuff?

Not many people run Procede in Houston. Maybe 2 people. I'd return it and pick up a COBB if it's not too late.

Originally Posted by Cbertrand

New member from Katy - been looking at 09 335 convertibles. Hope to purchase in the next few weeks.

Nice.

We have a FB page you guys should join. Find Hooy's signature for the link.

[na foo]

Originally Posted by youngnastyman

freaking piece of cake. lmk if u need someone to do it for you.

installed/deinstalled mine when i had a 335 like 900 million times.

Join the FB group. The link is in Hooy's signature or look it up E90 Post Houston.

[M3WU]

is there any meets coming up?

[yamazaho]

Originally Posted by M3WU

is there any meets coming up?

Not really, no one wanna start anything...!!!!

[na foo]

Originally Posted by yamazaho

Not really, no one wanna start anything...!!!!

Why do you have a picture of a different car on your signature?

[thyshallsmite]

Man these leather seats sure are getting hot in this summer heat, anyone have their 3 series interior redone? or inserts, would be nice to switch the some perforated napa leather inserts so my butt would be more comfy and my back would be less sweaty ><

[Brentster]

Originally Posted by thyshallsmite

Man these leather seats sure are getting hot in this summer heat, anyone have their 3 series interior redone? or inserts, would be nice to switch the some perforated napa leather inserts so my butt would be more comfy and my back would be less sweaty ><

The next 3 months is where ceramic tint display's its kller effectiveness

Here's a demonstration from our good friend Ryan:

http://www.youtube.com/watch?v=PNY3cGQH5TM

[thyshallsmite]

Originally Posted by Brentster

The next 3 months is where ceramic tint display's its kller effectiveness

Here's a demonstration from our good friend Ryan:

http://www.youtube.com/watch?v=PNY3cGQH5TM

where did you get it done and how much did it cost?

[Brentster]

Originally Posted by thyshallsmite

where did you get it done and how much did it cost?

That was Ryan's car. He got it done at Sunshield and I believe it's about $650.

http://www.sunshieldwindowtint.com/

[Eiight]

Originally Posted by na foo

Not many people run Procede in Houston. Maybe 2 people. I'd return it and pick up a COBB if it's not too late.

Nice.

We have a FB page you guys should join. Find Hooy's signature for the link.

If the COBB is just a reflash, then wouldn't I only need to find someone that has it , pay them some money, and have them do it for me without having to fork out $900 to buy it?