[Kentavian328i]

Hey guys I posted about this before but never got much help so here goes again... I have a 2007 BMW 328i coupe. I have this one particular issue. I switched out the OEM radio and put in a Eonon aftermarket radio around this time last year 6/10/18. It was completely plug in play. After the install I lost my AC. I only have heat and it only blows through the defrost vents and not any other vent on the car. Even when driving it the heat comes through the defrost making it extremely hot to drive during the day. Has anyone installed an aftermarket radio and experienced the same problem? I need help so I can get back to driving my car regularly... Its hot AF here in Tallahassee Fl so i need my AC back ASAP

[Daniel08E93]

Pull head unit out make sure all clips are all the way in on your climate control and also make sure you didn't punch any wires when putting everything back take your time and check wiring to make sure nothing is being bent you will be able to tell if they were being pinched or not, if your climate control unit is working it shouldn't be your fuse but just double check to make sure you don't have any clown fuses for your ac

[Kentavian328i]

I checked the wires and everything seemed to be in correctly and no pinched wires. I will unhook everything and then plug it and back in and see what happens. I looked at the fuses but ill test them to see if anything is blown. Keep you updated Thanks!

[Daniel08E93]

Originally Posted by Kentavian328i

I checked the wires and everything seemed to be in correctly and no pinched wires. I will unhook everything and then plug it and back in and see what happens. I looked at the fuses but ill test them to see if anything is blown. Keep you updated Thanks!

Good luck man hope this works, where are you located?

[Kentavian328i]

Originally Posted by Daniel08E93

Good luck man hope this works, where are you located?

I'm located in Tallahassee Florida. I just scanned the A/C modules an this what I got

[Kentavian328i]

Originally Posted by Kentavian328i

I'm located in Tallahassee Florida. I just scanned the A/C modules an this what I got

I gotta diagnosis the codes

[Kentavian328i]

Originally Posted by Kentavian328i

I gotta diagnosis the codes

Maybe it's a fuse or relay

[Daniel08E93]

Those are a lot of codes if you were closer I'd help personally but you might be right it could be a fuse or relay just double check them and pull them to see if any are burnt that are associated with the ac or climate controls

[Kentavian328i]

Originally Posted by Daniel08E93

Those are a lot of codes if you were closer I'd help personally but you might be right it could be a fuse or relay just double check them and pull them to see if any are burnt that are associated with the ac or climate controls

I'm going to pull them in the morning and check to see if that's the issue. All the code related to the same thing so I'm thinking a relay or fuse

[Daniel08E93]

It's looking like it just keep thread updated

[Kentavian328i]

Originally Posted by Daniel08E93

It's looking like it just keep thread updated

No problem 👍🏾

[Hart23]

I am having the same issue after installing a eonon HU. did you resolve the issue?

[Kentavian328i]

Originally Posted by Hart23

I am having the same issue after installing a eonon HU. did you resolve the issue?

Still working on it. I've been keeping up with another forum an one guy said that everything has to be plugged back in tightly or the actual ac unit may be bad so I'm going to test both today

[domikiki]

This is the a/c section of the service manual hope it helps.