TPMS Fault After Installing New Instrument Cluster

Kizelio · 06-30-2018, 01:11 AM

This is really weird. I installed a new cluster of the same type on my 2007 328xi e90 because the speedometer stopped working. Now when I run the Control Check, it is giving me {!}, and when I hold down the BC button, it gives me CC-ID 149, which is the TPMS. I have cleared all errors using INPA, but they come back. One of the errors is for KOMBI, and I can't remember what the other one is for.

So, my question is that is there something special I needed to do when changing the cluster? I have all the BMW Standard Tools. Please help.

Sensible_ · 07-01-2018, 03:24 AM

Quote:

Originally Posted by Kizelio

This is really weird. I installed a new cluster of the same type on my 2007 328xi e90 because the speedometer stopped working. Now when I run the Control Check, it is giving me {!}, and when I hold down the BC button, it gives me CC-ID 149, which is the TPMS. I have cleared all errors using INPA, but they come back. One of the errors is for KOMBI, and I can't remember what the other one is for.

So, my question is that is there something special I needed to do when changing the cluster? I have all the BMW Standard Tools. Please help.

When you say 'new' do you mean a factory new cluster? Or a used one new to your car?
Either way it needs to be properly coded to your car.

Use NCS Expert and default code it.

Kizelio · 07-01-2018, 10:10 AM

Quote:

Originally Posted by Sensible_

When you say 'new' do you mean a factory new cluster? Or a used one new to your car?
Either way it needs to be properly coded to your car.

Use NCS Expert and default code it.

It's new to my car, bought used from eBay. I have looked all over on how to code a different cluster, but can't find anything useful. Do you know of a link where I can find instructions on how to do this? Thanks!

Kizelio · 07-01-2018, 03:18 PM

Quote:

Originally Posted by Kizelio

It's new to my car, bought used from eBay. I have looked all over on how to code a different cluster, but can't find anything useful. Do you know of a link where I can find instructions on how to do this? Thanks!

Ok, I'm starting to get the hand of it. It was working at first, but now when I try to do anything, it gives me tons of errors. Here is the error log:

================================================== ==============================(3)
[15:13:33.745] [2018-07-01] [SERIE] 2001 Error COAPIEBA.CPP coapiEdiabasApiInit 1
[15:13:33.745] [2018-07-01] [SERIE] EDIABAS wurde nicht initalisiert

[15:13:33.749] [2018-07-01] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiInit 1
[15:13:33.749] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei IFH-0027: Interfacehandler ist nicht installiert FRM_87

[15:13:33.753] [2018-07-01] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[15:13:33.753] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ

[15:13:33.756] [2018-07-01] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[15:13:33.756] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX

[15:13:33.786] [2018-07-01] [SERIE] 2001 Error COAPIEBA.CPP coapiEdiabasApiInit 1
[15:13:33.786] [2018-07-01] [SERIE] EDIABAS wurde nicht initalisiert

[15:13:33.789] [2018-07-01] [SERIE] 2000 Error LFCDHDIA.CPP (A_PL2FRX.IPS/IPO) CDHapiInit 1
[15:13:33.789] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei IFH-0027: Interfacehandler ist nicht installiert FRM_87

[15:13:33.792] [2018-07-01] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[15:13:33.792] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ

[15:13:33.795] [2018-07-01] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[15:13:33.795] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_PL2FRX

[15:13:33.818] [2018-07-01] [SERIE] 2001 Error COAPIEBA.CPP coapiEdiabasApiInit 1
[15:13:33.818] [2018-07-01] [SERIE] EDIABAS wurde nicht initalisiert

[15:13:33.821] [2018-07-01] [SERIE] 2000 Error LFCDHDIA.CPP (A_E65CAS.IPS/IPO) CDHapiInit 1
[15:13:33.821] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei IFH-0027: Interfacehandler ist nicht installiert CAS

[15:13:33.824] [2018-07-01] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[15:13:33.824] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ

[15:13:33.826] [2018-07-01] [SERIE] 2000 Error COAPI4.CPP coapiReadAuftrag 4
[15:13:33.826] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FA_READ: A_E65CAS

[15:13:33.829] [2018-07-01] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9
[15:13:33.829] [2018-07-01] [SERIE] Fehler CAS

[15:13:33.857] [2018-07-01] [SERIE] 2001 Error COAPIEBA.CPP coapiEdiabasApiInit 1
[15:13:33.857] [2018-07-01] [SERIE] EDIABAS wurde nicht initalisiert

[15:13:33.861] [2018-07-01] [SERIE] 2000 Error LFCDHDIA.CPP (A_E65CAS.IPS/IPO) CDHapiInit 1
[15:13:33.861] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei IFH-0027: Interfacehandler ist nicht installiert CAS

[15:13:33.864] [2018-07-01] [SERIE] 2000 Error COAPI2.CPP coapiRunCabd 6
[15:13:33.864] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FGNR_LESEN

[15:13:33.866] [2018-07-01] [SERIE] 2000 Error COAPI.CPP coapiReadFgNr 12
[15:13:33.866] [2018-07-01] [SERIE] Fehler in EDIABAS oder in SG-Beschreibungsdatei FGNR_LESEN: A_E65CAS

06-30-2018, 01:11 AM	#1
Kizelio Enlisted Member 5 Rep 46 Posts Drives: 2007 328xi E90 Sedan Graphite Join Date: Jun 2011 Location: Minneapolis, MN, USA iTrader: (0)	TPMS Fault After Installing New Instrument Cluster This is really weird. I installed a new cluster of the same type on my 2007 328xi e90 because the speedometer stopped working. Now when I run the Control Check, it is giving me {!}, and when I hold down the BC button, it gives me CC-ID 149, which is the TPMS. I have cleared all errors using INPA, but they come back. One of the errors is for KOMBI, and I can't remember what the other one is for. So, my question is that is there something special I needed to do when changing the cluster? I have all the BMW Standard Tools. Please help.
	Appreciate 0 Tweet Quote