|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Adding DEF directly to the Active tank
|
|
10-22-2019, 04:36 PM | #1 |
New Member
0
Rep 22
Posts |
Adding DEF directly to the Active tank
Am I missing something with the DEF fill? I can easily fill the passive tank as the DEF fluid just flows right into it. However if I try to fill the active tank no fluid is taken in...and if I squeeze the bottle it all just pours out of the active filler tube.
My pump to draw from the passive tank has gone bad, which is why im trying to manually fill the active tank since im 500 miles from no start now. |
10-23-2019, 09:10 AM | #2 |
Captain
142
Rep 634
Posts |
There is a seal/door that must be pushed open in the fill port by the filler bottle. Make sure you are really pushing the bottle all the way in. You should not have to squeeze the bottle, it should just flow in by gravity.
|
Appreciate
0
|
10-25-2019, 08:54 PM | #4 |
New Member
0
Rep 22
Posts |
No go, even got a new bottle after trying to tighten the first one too hard and having it shatter the plastic. Looks like I'll have to find another way to inject fluid into the active tank, bypassing the fill port.
|
Appreciate
0
|
11-16-2019, 08:48 PM | #5 | |
New Member
0
Rep 21
Posts |
Quote:
https://www.e90post.com/forums/showp...86&postcount=3 Sounds like you are mixing up the active and passive tank ports (filler locations): "[The] lower takes fluid with ease." FWIW, I cannot get any fluid into the top, or passive tank. Seems a common problem. A warranty solution? https://www.bmwcca.org/forum/index.p...arranty.22316/ |
|
Appreciate
0
|
Bookmarks |
|
|