[gfuller40]

Hello all,

I recently went to have an alignment done and found that things were way out of whack and that every bolt to adjust was seized up. I took it to an indy mechanic and the first bolt snapped off on what looks to be the upper roll over strut?

I found a pic on here of someone having a similar problem but I cannot locate this part. I actually need the bushing for the upper control arm as well as the bolts for them.. Ideally all new bushing and all new bolts for upper and lower arms as well as left and right. I'm not sure what these are even referred to as... maybe camber?

Does anyone have any idea where just the bushings can be purchased? I don't need the arms or "roll over struts"

[feuer]

Originally Posted by gfuller40

Does anyone have any idea where just the bushings can be purchased? I don't need the arms or "roll over struts"

How are you going to replace the bushing if the arm is still mounted on the car?
Anyhow, get this:
https://www.ecstuning.com/b-genuine-...l/33322406290/

[gfuller40]

Well the arm will have to come off the car!

So they do not sell just the bushings?

Thank you!

[gfuller40]

Well the arm will have to come off the car!

So they do not sell just the bushings?

Thank you!

[feuer]

Originally Posted by gfuller40

Well the arm will have to come off the car!
So they do not sell just the bushings?
Thank you!

Yes, they do, but it will be stupid from you to buy the bushings separately.
Anyhow, here it is:
for upper arm
https://www.ecstuning.com/b-genuine-...h/33326763092/
for lower arm:
https://www.ecstuning.com/b-genuine-...h/33326792553/