[Seattlesquash]

Originally Posted by 335d cypis

This is how it look on back side

Nicely done! Question, is this caliper brackets, and bushings etc to fit the F30 calipers on M4 brake rotors?

Thanks, cheers.

[Turbid]

Originally Posted by Seattlesquash

Nicely done! Question, is this caliper brackets, and bushings etc to fit the F30 calipers on M4 brake rotors?

Thanks, cheers.

Yes look like.
I have brackets aswell.

[335d cypis]

Turbid show me how much You have to grind stuff
In my opinion in this solution to Small surface to fix it well.

[335d cypis]

Originally Posted by Seattlesquash

Nicely done! Question, is this caliper brackets, and bushings etc to fit the F30 calipers on M4 brake rotors?

Thanks, cheers.

All calipers f30 nad f80 are The same. Knuckle is different my solution is for rear m4 rotor.
In this solution You need just brackets no eccentric bushings are needed.

[Turbid]

Originally Posted by 335d cypis

Turbid show me how much You have to grind stuff
In my opinion in this solution to Small surface to fix it well.

I have to grind rear knuckle a bit to make surface a bit more flat. What about your front ones do you still use m12x1.5 bolts?

[335d cypis]

and have you got it wih photo like me?
for front i use m12x1.5 eccentric.

[Turbid]

Originally Posted by 335d cypis

and have you got it wih photo like me?
for front i use m12x1.5 eccentric.

Which picture you exactly interested?

[335d cypis]

so you thread knuckle? that is courage
for me too small surface to put caliper and thead in knuckle.
i use bolts and nuts both 10.9 grade.
but this is your solution. thanks for photos

[Turbid]

Originally Posted by 335d cypis

so you thread knuckle? that is courage
for me too small surface to put caliper and thead in knuckle.
i use bolts and nuts both 10.9 grade.
but this is your solution. thanks for photos

For some reason 12.9 bolts don't like break cleaner, but them stronger then 10.9 + them on the car for about 2years, that's only visual corrosion. I just threaded OEM hole it is already drilled to size, so it don't effect anything and you can put OEM caliper back any time. Btw your front adapters makes brake pads don't sit in center of brake disc, because you can't offset that much?

[335d cypis]

Front 380 look The same as rear 345 1-2 mm missing to Center pad on disc, but All pad is on disc works perfectly fine.

[Seattlesquash]

Originally Posted by 335d cypis

All calipers f30 nad f80 are The same. Knuckle is different my solution is for rear m4 rotor.
In this solution You need just brackets no eccentric bushings are needed.

Cool, Thanks for letting me know. Now is this problematic for me since I machined caliper and offset hole prior for 345 rear E60 setup and w/modified brake shoes to 185mm conversion. Let me know, and love to go up next time I change rotors front and rear. Appreciate it.

[Turbid]

Originally Posted by Seattlesquash

Cool, Thanks for letting me know. Now is this problematic for me since I machined caliper and offset hole prior for 345 rear E60 setup and w/modified brake shoes to 185mm conversion. Let me know, and love to go up next time I change rotors front and rear. Appreciate it.

thats not the problem. I did rear brackets for customer who did exactly same think.

[335d cypis]

I dont know who should answer... also no problem for me

[dreptroman]

Has anybody tried 34116891273 G30 calipers for front?

[335d cypis]

For 36mm thick?
Find The rotor.

[dreptroman]

I have seen some debate on the rear feur started on page 57. Will eccentric bushings for the rear be sufficent? Or do i meed to mill anything else... How was this sorted?

[335d cypis]

all you need is eccentric bushings if you want it ive got some in my garage.

[Radu328i]

Originally Posted by 335d cypis

Hello again this Time I have Full m4-> e90 adapter set.


All You need to do is grind few mm on yellow marked place. No grinding of brackets. And any Working surface.

hello to everybody.
@335d cypis, please, can you tell me: this adapter set is designed for
F32 rear brake rotor - 345X24 or it is designed for F82 rear rotor - 370X24.
Thanks.

[335d cypis]

I have all adapters for 345 e60 rotor 345 f30 rotor 370 m4 rotor. These on Photo are m4 adapters front 380 rear 370

[Turbid]

Originally Posted by Radu328i

hello to everybody.
@335d cypis, please, can you tell me: this adapter set is designed for
F32 rear brake rotor - 345X24 or it is designed for F82 rear rotor - 370X24.
Thanks.

Best option is go with F3x calipers and E6X rear 345 rotors then you don't need to machine calipers.

[salpone]

Originally Posted by 335d cypis

Hello again this Time I have Full m4-> e90 adapter set.


All You need to do is grind few mm on yellow marked place. No grinding of brackets. And any Working surface.

Hello,
to mount the 4pt brembo calipers (the blue ones) of the M2 with 380x30 discs (M2)
and rear 2-pin Brembo caliper (blue ones) of the M2 with 370x24 discs (M2)
on bmw F32 430d, do you need spacer brackets?

[335d cypis]

Turbid add pattern to prevent rotating of bushings.. as oem product
Best regards From Poland