[dextuar]

Originally Posted by Sensible_

Hmm,

Coding block is empty. Have you physically taken apart the KOMBI to see if the CC slider/indicator is present?

is this a KOMBI high or low? (Big lower screen or small screen?)

I can make you a nettodat.man for CC activation but if the physical motor and slider aren't there it won't work.

It looks exactly the same as my old KOMBI, attached the photo of the new one. I have had it opened but I don't know what I should be looking at. My CC is working, there is just no display information that it is active. It used to pop up a 3 sec. message showing the set speed. Everything besides that and the KVA_DIGITAL seems to be same, the old KOMBI TRC file was 8KB, the new ist just 5KB. I don't have pictures of the opened new one but I can make such if it is necessary. Here are also pictures of my old one opened.

This is the reason for the swap.

[Sensible_]

Ahhhh now I see...

You have KOMBI Low with no cruise control slider.

To activate the feature look in the trc file for KOMBI:

TEMPOMAT_SETZ_ANZ_DAUER

and set to wert02

If it's not present you'll need to update the KOMBI coding index.

[dextuar]

Originally Posted by Sensible_

Ahhhh now I see...

You have KOMBI Low with no cruise control slider.

To activate the feature look in the trc file for KOMBI:

TEMPOMAT_SETZ_ANZ_DAUER

and set to wert02

If it's not present you'll need to update the KOMBI coding index.

I already did that, as well acc_ausstattung wert 1 but that worked only for my old kombi, i did the same with the new one but no change

[Sensible_]

Originally Posted by dextuar

I already did that, as well acc_ausstattung wert 1 but that worked only for my old kombi, i did the same with the new one but no change

I see. Interesting. Can you contact the guy that wrote your VIN to see if he has a copy of your eeprom?

[dextuar]

Originally Posted by Sensible_

I see. Interesting. Can you contact the guy that wrote your VIN to see if he has a copy of your eeprom?

Unfortunately, he does not have it anymore. But I am into buying a programmer but probably I should buy a new KOMBI

Could you still though send me the NETTODAT so that I can try it anyway please?

[Sensible_]

Originally Posted by dextuar

Unfortunately, he does not have it anymore. But I am into buying a programmer but probably I should buy a new KOMBI

Could still though send me the NETTODAT so that I can try it anyway.

The nettodat man won't work as that specific address is for the slider indicator which I wrongly assumed was what you were referring to.

However, I'll research this a bit. What coding index is the KOMBI currently using? C05?

[dextuar]

Originally Posted by Sensible_

The nettodat man won't work as that specific address is for the slider indicator which I wrongly assumed was what you were referring to.

However, I'll research this a bit. What coding index is the KOMBI currently using? C05?

Exactly. It is KMBI_PL2.C05. Thank you so much!

[Sensible_]

Originally Posted by dextuar

Exactly. It is KMBI_PL2.C05. Thank you so much!

No problem. I'm sure there is a way. 100% DIGITAL_KVA requires a coding index update.

For your CC. Just clarify for my your KOMBI settings are as follows...

TCM_ALIVE_MONITOR
aktiv
TEMPOMAT_SETZ_ANZ_DAUER
wert_02
BC_2_ENABLE
aktiv
BC_LIMIT_ENABLE
aktiv

[dextuar]

Originally Posted by Sensible_

No problem. I'm sure there is a way. 100% DIGITAL_KVA requires a coding index update.

For your CC. Just clarify for my your KOMBI settings are as follows...

TCM_ALIVE_MONITOR
aktiv
TEMPOMAT_SETZ_ANZ_DAUER
wert_02
BC_2_ENABLE
aktiv
BC_LIMIT_ENABLE
aktiv

Yes, they are. Attached the KOMBI.TRC file I currently have.