[zort]

Hey guys , I just finished installing the b12 pro kit. After driving for a bit I noticed the rear was 1/2 inch higher on the drivers side rear.

Looked up the posts on minor height differences due to the overall suspension setup etc. But to ensure I installed everything correctly I went back in.

This is what I found.

On the drivers side the spring stopped at the red arrow on the spring pad, what ever lip that is, and the blue spot on the passenger side. On the passenger side it looked like that lip was totally flat.

My question is where is the correct spot. Seems it should be the red spot and the passenger side has collapsed maybe causing the passenger to be lower.




-Brule

[zort]

It just occurred to me that if the tab on the passenger side is flat that the spring pad has just failed and is causing the 1/2 inch drop.

[zort]

Ok so figured out where the spring should seat in the lower mount. Swapped the lower mounts and same issue.

Guess 1/2 a tank of gas really adds 1/2 inch !

-Brule