[Smityp116]

Guys looking to confirm something. 2008 e91 320d N47. Changing the oil filter housing gasket at its leaking. While the housing is off the block I've noticed the two connectors which are connected to the oil cooler within the housing are weeping. The bottom one in the pic pulled right off to allow me to change the o-rings on them. However the top one circled seems to me much harder to get out. Can someone confirm this will just pull out with force?

Thanks
Paul

[Smityp116]

Just wanted to answer my own question in case anyone ever wanted to know. Both connecter tubes to the oil cooler can be pulled out and o-rings changed.

Cheers
Paul

[e90mani]

Hi pal i will be doing a gasket change soon did you have to drain the coolant and oil? Any tips? Thanks much appreciated