E90Post
 


TNT Racewerks
 
BMW 3-Series (E90 E92) Forum > BMW E90/E92/E93 3-series General Forums > Regional Forums > Australia > Australia Classifieds Section > NBT retrofit to CCC and CIC



Reply
 
Thread Tools Search this Thread
      06-09-2019, 02:05 AM   #309
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by vtl View Post
Dont think this thread will have any updates, we installed these ages ago, the biggest pain was wiring in the microphone, bluetooth and reverse camera connections, none of which had proper instructions.
So Finally decided to try and install the reverse camera and also having issues with the bluetooth microphone not working. Can you at all remember how you did this at all cause I have been wrecking my brain over this. Any help would be muchly appreciated.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 0
      06-09-2019, 07:32 AM   #310
Socket
Lieutenant General
Socket's Avatar
Australia
2897
Rep
10,655
Posts

Drives: 335i
Join Date: Nov 2014
Location: Melbourne

iTrader: (4)

Garage List
2008 BMW E92  [0.00]
Quote:
Originally Posted by DAT335 View Post
So Finally decided to try and install the reverse camera and also having issues with the bluetooth microphone not working. Can you at all remember how you did this at all cause I have been wrecking my brain over this. Any help would be muchly appreciated.
I purchased a new BT antenna that plugged into the back of the NBT unit

There is a pic on my DIY NBT retrofit thread in the DIY section of the forum
Appreciate 0
      06-09-2019, 07:49 AM   #311
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by Socket View Post
I purchased a new BT antenna that plugged into the back of the NBT unit

There is a pic on my DIY NBT retrofit thread in the DIY section of the forum
I bought and installed a new one. Everything works but the microphone. I can hear them but they cant hear me.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 0
      06-10-2019, 07:01 AM   #312
DR-JEKL
Major General
Australia
716
Rep
6,102
Posts

Drives: Space Grey E92 335i 6MT
Join Date: Jul 2012
Location: Newcastle Ozstraylia

iTrader: (3)

Quote:
Originally Posted by DAT335 View Post
I bought and installed a new one. Everything works but the microphone. I can hear them but they cant hear me.
Yup I had the same issue

I rarely use it so gave up, Vince said whole cars gotta be pulled apart to get it working
Appreciate 0
      06-10-2019, 07:49 AM   #313
DR-JEKL
Major General
Australia
716
Rep
6,102
Posts

Drives: Space Grey E92 335i 6MT
Join Date: Jul 2012
Location: Newcastle Ozstraylia

iTrader: (3)

Quote:
Originally Posted by DAT335 View Post
I bought and installed a new one. Everything works but the microphone. I can hear them but they cant hear me.
Yup I had the same issue

I rarely use it so gave up, Vince said whole cars gotta be pulled apart to get it working
Appreciate 0
      06-11-2019, 03:18 PM   #314
Aus335iguy
Lieutenant Colonel
Aus335iguy's Avatar
518
Rep
1,915
Posts

Drives: 2009 e92 335i MSport DCT
Join Date: Jul 2015
Location: Sydney Aus

iTrader: (0)

Garage List
2009 BMW 335i  [5.00]
Quote:
Originally Posted by DR-JEKL View Post
Quote:
Originally Posted by DAT335 View Post
I bought and installed a new one. Everything works but the microphone. I can hear them but they cant hear me.
Yup I had the same issue

I rarely use it so gave up, Vince said whole cars gotta be pulled apart to get it working
Is it because in cic and ccc the mic is plugged into the combox/mulf and for NBT it goes to the headunit ?
__________________
When you doppelkaplung you doppel your fun.
Appreciate 0
      06-12-2019, 04:04 AM   #315
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by Aus335iguy View Post
Is it because in cic and ccc the mic is plugged into the combox/mulf and for NBT it goes to the headunit ?
you might be right there
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 0
      06-12-2019, 05:46 AM   #316
DR-JEKL
Major General
Australia
716
Rep
6,102
Posts

Drives: Space Grey E92 335i 6MT
Join Date: Jul 2012
Location: Newcastle Ozstraylia

iTrader: (3)

Quote:
Originally Posted by Aus335iguy View Post
Is it because in cic and ccc the mic is plugged into the combox/mulf and for NBT it goes to the headunit ?
Hmm I think there's more to it than that, vtl can you please enlighten us when you get a chance plz?
Appreciate 0
      06-12-2019, 07:36 AM   #317
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by DR-JEKL View Post
Hmm I think there's more to it than that, vtl can you please enlighten us when you get a chance plz?
I have the instruction manual now from the europe guy we bought off. He also gave me map update for australia 2019 and the code plus the media centre update links aswell.
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 0
      06-12-2019, 04:07 PM   #318
vtl
Brigadier General
vtl's Avatar
Australia
1130
Rep
3,018
Posts

Drives: 2008 BMW 135i MT
Join Date: Apr 2015
Location: Melbourne, Australia

iTrader: (0)

That's exactly right, the mic is plugged into the Bluetooth unit on the CIC/CCC and on nbt it's directly plugged in. We elected to run an extension from the boot to the headunit to reuse the factory mics
Appreciate 0
      06-12-2019, 11:33 PM   #319
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by vtl View Post
That's exactly right, the mic is plugged into the Bluetooth unit on the CIC/CCC and on nbt it's directly plugged in. We elected to run an extension from the boot to the headunit to reuse the factory mics
ok I dont want to be a pain but could you draw a diagram roughly where and what wiring i need to extend out of the combox in the boot. is that possible please. all good if you cant
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 0
      06-13-2019, 04:08 AM   #320
Aus335iguy
Lieutenant Colonel
Aus335iguy's Avatar
518
Rep
1,915
Posts

Drives: 2009 e92 335i MSport DCT
Join Date: Jul 2015
Location: Sydney Aus

iTrader: (0)

Garage List
2009 BMW 335i  [5.00]
Quote:
Originally Posted by DAT335 View Post
Quote:
Originally Posted by vtl View Post
That's exactly right, the mic is plugged into the Bluetooth unit on the CIC/CCC and on nbt it's directly plugged in. We elected to run an extension from the boot to the headunit to reuse the factory mics
ok I dont want to be a pain but could you draw a diagram roughly where and what wiring i need to extend out of the combox in the boot. is that possible please. all good if you cant
The combox pinout is here
https://www.e90post.com/forums/showthread.php?t=1355394
Im not sure for the NBT.

Hope that helps
__________________
When you doppelkaplung you doppel your fun.
Appreciate 0
      06-13-2019, 04:09 AM   #321
DR-JEKL
Major General
Australia
716
Rep
6,102
Posts

Drives: Space Grey E92 335i 6MT
Join Date: Jul 2012
Location: Newcastle Ozstraylia

iTrader: (3)

Quote:
Originally Posted by DAT335 View Post
I have the instruction manual now from the europe guy we bought off. He also gave me map update for australia 2019 and the code plus the media centre update links aswell.
Oh nice so you just emailed him for map updates?
Appreciate 0
      06-13-2019, 07:33 AM   #322
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by DR-JEKL View Post
Oh nice so you just emailed him for map updates?
thats correct
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 2
DR-JEKL715.50

      06-13-2019, 06:11 PM   #323
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by vtl View Post
That's exactly right, the mic is plugged into the Bluetooth unit on the CIC/CCC and on nbt it's directly plugged in. We elected to run an extension from the boot to the headunit to reuse the factory mics
Hey I got this sent from the guys in Romania

Microphone must be wired to NBT according to the manual on pins 17 (+) and 22 (-), you need to check that pins from microphone are correctly wired and fully inserted in connector. Also you need to make sure that old BT module in the car was disconnected and removed and MOST bus (fiber optic) closed.

So does that mean to remove the module in the boot completely out? Im guessing it is rendered obsolete? Is this correct? Does our system not need anything further from the bluetooth unit??

MOST bus (fiber optic) closed. What and how do you do that?
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 0
      06-13-2019, 06:56 PM   #324
Aus335iguy
Lieutenant Colonel
Aus335iguy's Avatar
518
Rep
1,915
Posts

Drives: 2009 e92 335i MSport DCT
Join Date: Jul 2015
Location: Sydney Aus

iTrader: (0)

Garage List
2009 BMW 335i  [5.00]
There's a MOSt loop connector that you can buy to close the loop. Disconnect the other connector and you should be ok.
__________________
When you doppelkaplung you doppel your fun.
Appreciate 1
DAT33543.50

      06-13-2019, 07:11 PM   #325
vtl
Brigadier General
vtl's Avatar
Australia
1130
Rep
3,018
Posts

Drives: 2008 BMW 135i MT
Join Date: Apr 2015
Location: Melbourne, Australia

iTrader: (0)

Bluetooth unit goes into the trash. NBT handles bluetooth. You could in theory just leave it connected in the boot and not cause any issues.

If you remove the bluetooth unit theres an optical fibre network in the car that it is a part of. Removing a module will break the optical fibre loop. You basically need to buy a blanking plug that has an optical fibre loop in it to pass the signal though.
__________________
Build Thread | MHD Custom Tune | Agency Power DPs | PE Mod Exhaust | 550i Clutch | Wagner FMIC | M3 LSD | Turbosmart Kompact DVs | M3 Control arms | M3 steering rack | KW Competition Coilovers | Dinan Camber Plates | E92 M3 Front Sway | UUC Trans mounts | Nolathane rear subframe bushings | Alcon 355mm BBK | Yokohama AD08R | Apex EC-7 | Schroth Harness | M3 Steering Wheel | LEDs | CIC + Combox retrofit
Appreciate 1
DAT33543.50

      06-13-2019, 10:01 PM   #326
DAT335
First Lieutenant
DAT335's Avatar
Australia
44
Rep
303
Posts

Drives: BMW 2006 E92 335i Coupe
Join Date: Dec 2015
Location: Gold Coast

iTrader: (0)

Quote:
Originally Posted by vtl View Post
Bluetooth unit goes into the trash. NBT handles bluetooth. You could in theory just leave it connected in the boot and not cause any issues.

If you remove the bluetooth unit theres an optical fibre network in the car that it is a part of. Removing a module will break the optical fibre loop. You basically need to buy a blanking plug that has an optical fibre loop in it to pass the signal though.
So I removed the bluetooth module and noticed that the fiber optics connector has no red flashing light going to it. Ages ago when I put my meth tank in the installer removed what I believe was some nav com box or something on the left handside what I can remember and then ever since then had the SOS error. I just pulled apart the boot and noticed that the connector to that combox with the fiber isn't in the connector but has been looped somehow.

Anyway if I want to use the mics in the car do I run a line from the big connector that came off the bluetooth module which Im guessing certain wires are for the mic's. Is that correct how you did it on phils car?
__________________
Aussie e92 335i. Pure Stage 2 Twin Turbos, PPM Forge Conrods and Pistons, Fuel-it Port Injection, 7.5" Step-Up intercooler, Fuel-it Stage 3 LPFP upgraded fuel lines, with Hobb Switch, Bimmer Life Coils, Tial 50mm BOV, TFT RHD Inlets, MHD Custom Wedge E70 Map, Split Second PI controller, BMS OCC, 3.5 bar TMAP, AR Design 3" Catless DP, Remus Dual 2.5" system with 84mm quad tips, RB PCV valve, CSF Radiator
Appreciate 0
      06-14-2019, 02:37 AM   #327
Aus335iguy
Lieutenant Colonel
Aus335iguy's Avatar
518
Rep
1,915
Posts

Drives: 2009 e92 335i MSport DCT
Join Date: Jul 2015
Location: Sydney Aus

iTrader: (0)

Garage List
2009 BMW 335i  [5.00]
Duplicate
__________________
When you doppelkaplung you doppel your fun.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 07:41 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST