[08TUNDRA]

Long story short my n54 blew up so I bought a wrecked e90 and did an engine and transmission swap. everything is all bolted in, the only problem I am having is the engine wont start, no crank no start I removed $205 from the vehicle order in the CAS and NFRM however the car will not start and I dont know what to do. I think my inpa is faulty because I am getting error 100 when I try to communicate with the DME there is no communication. If somone wants to remote in I will pay!

[Sensible_]

Originally Posted by 08TUNDRA

Long story short my n54 blew up so I bought a wrecked e90 and did an engine and transmission swap. everything is all bolted in, the only problem I am having is the engine wont start, no crank no start I removed $205 from the vehicle order in the CAS and NFRM however the car will not start and I dont know what to do. I think my inpa is faulty because I am getting error 100 when I try to communicate with the DME there is no communication. If somone wants to remote in I will pay!

Please show your list of fault codes...

Which DME / CAS set are you using? From donor vehicle or original?

[08TUNDRA]

Originally Posted by Sensible_

Please show your list of fault codes...

Which DME / CAS set are you using? From donor vehicle or original?

Thanks, I got it all figured out, I had to do a clean install of BMW standard tools I was getting a bunch of errors But its all good now. Thank you!

[08TUNDRA]

Got it all figured out! everything is all coded properly and everything functions like an OEM 6mt! These forums are irreplaceable for the knowledge they provide you!