|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CABD Error in NCS Expert
|
|
04-29-2019, 04:06 PM | #1 |
New Member
4
Rep 7
Posts |
CABD Error in NCS Expert
Nice to meet everyone here! I'm new to this so pls be patient...
Just got a Bimmergeeks cable and it seems to be working fine. I have been on countless blogs and have gone over FAQ's to make sure I am doing everything right. I keep getting "error in CABD!" when I try to read or write files on my '09 E92. I have spent days going over everything to make sure I am not screwing this up - Here's some background: Win 10 laptop - com port 1, latency 1 on usb connection NCS Expert connects but the ingition circle on INPA is not filled in, only the cable NCS profile on Expert (manipulation unchecked) Here isthe error log: [23:31:55.689] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371 [23:31:55.689] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED [23:31:55.798] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6 [23:31:55.798] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN ================================================== ============================== [23:34:08.107] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS TestCod 365 [23:34:08.107] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_SCHREIBEN: ERROR_ECU_UPLOAD_NOT_ACCEPTED [23:34:08.220] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6 [23:34:08.220] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) TEST_CODIERUNG ================================================== ============================== [23:35:28.342] [2019-04-28] [SERIE] 2060 PABD/CABD A_PL2KMB.IPS Cod 371 [23:35:28.342] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) KOMB87, C_C_AUFTRAG: ERROR_ECU_UPLOAD_NOT_ACCEPTED [23:35:28.454] [2019-04-28] [SERIE] 2060 Error COAPI2.CPP coapiRunCabd 6 [23:35:28.454] [2019-04-28] [SERIE] Codierung fehlerhaft (allgemein) SG_CODIEREN_OHNE_FG_AEI ================================================== ============================== Many thanks in advance... |
04-30-2019, 10:09 AM | #4 |
New Member
4
Rep 7
Posts |
I have only tried a few modules, but it occurs every time I try to read OR write. INPA works and will do the test functions (ex: move the seat, test the gauges, etc.) so I know the cable from Bimmergeeks works. Also, through INPA I was able to verify that the cluster works by running a test on it. My original problem was that the tach, temp and fuel gauges were kicking in for a rew seconds then going back to 0. I read on a different post that DATEN files need to be updated in such an event. What do I need to do to update the DATEN files? I will look for the BMW coding tool that you mention...Thanks...any help would be highly appreciated!
|
Appreciate
0
|
04-30-2019, 10:25 AM | #5 |
New Member
4
Rep 7
Posts |
I just found the coding tool. I also downloaded some DATEN files for my chassis code. I will try it today and let you know...if this works out I cannot wait to start coding away...will keep you posted!
|
Appreciate
0
|
04-30-2019, 04:20 PM | #6 |
New Member
4
Rep 7
Posts |
Hey guys...looks like the KOMBI ecu is the only one that gets the error...all the rest work perfectly. Is there any way to reset the ECU to stock? I thik the programmer that messed it up in the first place may have screed up the ecu flashing?
|
Appreciate
0
|
04-30-2019, 06:09 PM | #7 |
New Member
4
Rep 7
Posts |
UPDATE: Used WINkfp to re-flash the KOMBI to an earlier version and it worked like a charm!!! All gauges work again...thanks for the support. Now for some serious coding!!!!!!
|
Appreciate
0
|
Bookmarks |
|
|