|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Need help fixing ignition problem
|
|
06-09-2021, 06:11 PM | #1 |
New Member
1
Rep 5
Posts |
Need help fixing ignition problem
Hello all. So I have no experience fixing cars but would like to try to self diagnose and fix up a 2011 328i. It's not starting and when it ran a couple months ago, the abs was having problems and at the time I concluded the wheel speed sensors needed to be changed. I ran a obd scan and got the error codes below. Which one is priority in order to get the car started? There are multiple duplicate codes maybe because I tried to start the car several times unsuccessfully therefore triggering duplicate codes?
Car Scanner ELM OBD2 DTC report Selected brand: BMW ============1============== P1776 Raw code: 1776 ECU: 7EC Status: Confirmed OBDII: Ignition Retard Request Duration Fault ============2============== 29E0 Raw code: 29E0 ECU: Engine control unit Status: Pending fault present during this driving cycle, Validated fault has been present during this drive cycle ============3============== 2D06 Raw code: 2D06 ECU: Engine control unit Status: Pending fault present, Validated fault has been present during this drive cycle ============4============== 2D16 Raw code: 2D16 ECU: Engine control unit Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory, Validated fault present at time of request ============5============== 2D0F Raw code: 2D0F ECU: Engine control unit Status: Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle ============6============== 29E0 Raw code: 29E0 ECU: Engine control unit Status: Pending fault present during this driving cycle, Validated fault has been present during this drive cycle ============7============== 2D06 Raw code: 2D06 ECU: Engine control unit Status: Pending fault present, Validated fault has been present during this drive cycle ============8============== 2D16 Raw code: 2D16 ECU: Engine control unit Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory, Validated fault present at time of request ============9============== 2D0F Raw code: 2D0F ECU: Engine control unit Status: Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle ============10============== 29E0 Raw code: 29E0 ECU: Engine control unit #1 Status: Pending fault present during this driving cycle, Validated fault has been present during this drive cycle ============11============== 2D06 Raw code: 2D06 ECU: Engine control unit #1 Status: Pending fault present, Validated fault has been present during this drive cycle ============12============== 2D16 Raw code: 2D16 ECU: Engine control unit #1 Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory, Validated fault present at time of request ============13============== 2D0F Raw code: 2D0F ECU: Engine control unit #1 Status: Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle ============14============== 581A Raw code: 581A ECU: Transmission control unit Status: Test is inhibited by other DTC, Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle ============15============== 93A8 Raw code: 93A8 ECU: SRS/Airbag Status: Validated and stored in non volatile memory, Validated fault present at time of request, Validated fault has been present during this drive cycle ============16============== 93C3 Raw code: 93C3 ECU: SRS/Airbag Status: Test conditions are met, Validated and stored in non volatile memory ============17============== C947 Raw code: C947 ECU: SRS/Airbag Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory, Validated fault present at time of request ============18============== A6D3 Raw code: A6D3 ECU: IPDM/Junction box (JBBF) Status: Pending fault present during this driving cycle, Validated and stored in non volatile memory ============19============== A8AB Raw code: A8AB ECU: Central module (in driver's footwell) (FRM) Status: Test conditions are met, Validated and stored in non volatile memory ============20============== A8C4 Raw code: A8C4 ECU: Central module (in driver's footwell) (FRM) Status: Test conditions are met, Validated and stored in non volatile memory, Validated fault present at time of request ============21============== A8AA Raw code: A8AA ECU: Central module (in driver's footwell) (FRM) Status: Test conditions are met, Validated and stored in non volatile memory |
06-10-2021, 01:24 AM | #2 |
e91Owner
425
Rep 1,129
Posts |
It would be best to clear the faults and re-run after a start attempt.
If this is your first foray into repairing a car, these may be out of the scope to fix on your own. |
Appreciate
0
|
Bookmarks |
|
|