BPC and BDP do it once again, 100whp/116wtq gain

petey_highboost · 02-03-2016, 10:43 AM

Had an opportunity to cruise around in the car last night ran into a couple local bmw guys, one has a 335xi with jb4, intakes, and downpipes 6MT, from about 30-120 had a car or so on him.

Other guy has a 135i, intake, downpipes, jb4, pump&e85 mix 15-16psi.. Same deal 30-120~ he took me by a car or so (ran a 12.4@114).

Pretty impressed with this little diesel that has abc delete, and tune

. I have videos but Id have to upload them, not sure how fond street racing videos are on this forum

gtp900 · 02-03-2016, 12:12 PM

Quote:

Originally Posted by petey_highboost

Had an opportunity to cruise around in the car last night ran into a couple local bmw guys, one has a 335xi with jb4, intakes, and downpipes 6MT, from about 30-120 had a car or so on him.

Other guy has a 135i, intake, downpipes, jb4, pump&e85 mix 15-16psi.. Same deal 30-120~ he took me by a car or so (ran a 12.4@114).

Pretty impressed with this little diesel that has abc delete, and tune

. I have videos but Id have to upload them, not sure how fond street racing videos are on this forum

It's ok, we all take trips to Mexico once in s while

HeatherM35d · 02-03-2016, 12:13 PM

Quote:

Originally Posted by petey_highboost

Had an opportunity to cruise around in the car last night ran into a couple local bmw guys, one has a 335xi with jb4, intakes, and downpipes 6MT, from about 30-120 had a car or so on him.

Other guy has a 135i, intake, downpipes, jb4, pump&e85 mix 15-16psi.. Same deal 30-120~ he took me by a car or so (ran a 12.4@114).

Pretty impressed with this little diesel that has abc delete, and tune

. I have videos but Id have to upload them, not sure how fond street racing videos are on this forum

Lots of mosquito fogging last night

iaknown · 02-03-2016, 12:19 PM

Quote:

Originally Posted by petey_highboost

Had an opportunity to cruise around in the car last night ran into a couple local bmw guys, one has a 335xi with jb4, intakes, and downpipes 6MT, from about 30-120 had a car or so on him.

Other guy has a 135i, intake, downpipes, jb4, pump&e85 mix 15-16psi.. Same deal 30-120~ he took me by a car or so (ran a 12.4@114).

Pretty impressed with this little diesel that has abc delete, and tune

. I have videos but Id have to upload them, not sure how fond street racing videos are on this forum

Not bad at all!

BEWWWM · 02-04-2016, 08:27 AM

Post the vids Petey!

petey_highboost · 02-21-2016, 03:52 PM

Ok guys, some locals had a meet last night and decided to swing by to see what was going on, these guys learned to not sleep on the little diesel! Here are some vids
Me vs a 375awhp subaru

Vs. A 385rwhp 4th gen camaro

Vs 135i from few weeks back

Vs 335xi from few weeks back also

Also ran down a new full bolt on wrx and an srt4 on e85 haaaahaha
Enjoy guys, the potential of these cars are great

Bob@BPC · 02-21-2016, 04:13 PM

Quote:

Originally Posted by petey_highboost

Ok guys, some locals had a meet last night and decided to swing by to see what was going on, these guys learned to not sleep on the little diesel! Here are some vids
Me vs a 375awhp subaru

Vs. A 385rwhp 4th gen camaro

Vs 135i from few weeks back

Vs 335xi from few weeks back also

Also ran down a new full bolt on wrx and an srt4 on e85 haaaahaha
Enjoy guys, the potential of these cars are great

Let me know when you are ready for the hybrid tune LOL

petey_highboost · 02-21-2016, 04:17 PM

Quote:

Originally Posted by Bob@BPC

Quote:

Originally Posted by petey_highboost

Ok guys, some locals had a meet last night and decided to swing by to see what was going on, these guys learned to not sleep on the little diesel! Here are some vids
Me vs a 375awhp subaru

Vs. A 385rwhp 4th gen camaro

Vs 135i from few weeks back

Vs 335xi from few weeks back also

Also ran down a new full bolt on wrx and an srt4 on e85 haaaahaha
Enjoy guys, the potential of these cars are great

Let me know when you are ready for the hybrid tune LOL

Hybrid tune with stock turbos your saying? I dunno these things are already huffing a good amount of air already haha

Really gotta get to the track !!!

BEWWWM · 02-21-2016, 05:00 PM

Very impressed with your run against the manual modded LS1.

petey_highboost · 02-21-2016, 05:04 PM

Quote:

Originally Posted by BEWWWM

Very impressed with your run against the manual modded LS1.

Yea I was surprised, we couldn't do a slower roll because his tranny 2nd gear is acting up on him, otherwise from a 30-40 roll I have a feeling he'd be playing catch up a lot longer. He ran his friends c4 vette that went 12.2@ 114 and pulls away from that for reference

BEWWWM · 02-21-2016, 05:10 PM

LS1s are strong mid-top end, I agree you'd have held him off more from a more diesel friendly speed.

petey_highboost · 03-01-2016, 10:49 AM

Here's a dyno video, forgot to post one up!

Installing the new intercooler kit tonight or tomorrow and I should have it back on the dyno next weekish, before I race the car at englishtown !

petey_highboost · 03-07-2016, 07:25 PM

I kinda like the way these wheels look! Drag radials will be mounted on these light weight sport edition wheels either tommorrow or Wednesday

32valves · 03-07-2016, 07:43 PM

great vidoes

335dsleeper · 03-07-2016, 08:29 PM

Quote:

Originally Posted by petey_highboost

I kinda like the way these wheels look! Drag radials will be mounted on these light weight sport edition wheels either tommorrow or Wednesday

Nice

petey_highboost · 03-08-2016, 11:53 PM

Well, had a run in with a bolt on 2016 6MT mustang GT today.. Had intake, exhaust, headers, and a tune.. 30-130.. Here's the vid ! Looks like the intercooler helped out a little bit!

petey_highboost · 03-10-2016, 11:31 AM

Ready to rock!

petey_highboost · 03-10-2016, 11:32 AM

Whoops posted same pic twice

iaknown · 03-10-2016, 12:15 PM

Nice!

What wheel/tire size and offsets did you get?

32valves · 03-10-2016, 12:45 PM

Quote:

Originally Posted by petey_highboost

Whoops posted same pic twice

clean those dirty rear wheels it's good for 2 tenths of a second

petey_highboost · 03-10-2016, 12:50 PM

Quote:

Originally Posted by iaknown

Nice!

What wheel/tire size and offsets did you get?

Tires are 245/45/17 hoosier DR's

As for offset, no idea, Jess told me there off of a bmw and said they should fit so I tested them and they fit

pretty light weight too !

petey_highboost · 03-10-2016, 12:51 PM

Quote:

Originally Posted by 32valves

Quote:

Originally Posted by petey_highboost

Whoops posted same pic twice

clean those dirty rear wheels it's good for 2 tenths of a second

There clean!! Cleaned them about 20 min after I took the pics. They are removed, cleaned, and in the trunk now haaha

02-03-2016, 10:43 AM	#23
petey_highboost Second Lieutenant 79 Rep 244 Posts Drives: '10 335D Join Date: Nov 2015 Location: albany, ny iTrader: (0)	Had an opportunity to cruise around in the car last night ran into a couple local bmw guys, one has a 335xi with jb4, intakes, and downpipes 6MT, from about 30-120 had a car or so on him. Other guy has a 135i, intake, downpipes, jb4, pump&e85 mix 15-16psi.. Same deal 30-120~ he took me by a car or so (ran a 12.4@114). Pretty impressed with this little diesel that has abc delete, and tune . I have videos but Id have to upload them, not sure how fond street racing videos are on this forum
	Appreciate 0 Quote

02-04-2016, 08:27 AM	#27
BEWWWM I like to party 45 Rep 126 Posts Drives: 2011 335d Join Date: Sep 2015 Location: Tampa iTrader: (0)	Post the vids Petey!
	Appreciate 1 Quote

02-21-2016, 03:52 PM	#28
petey_highboost Second Lieutenant 79 Rep 244 Posts Drives: '10 335D Join Date: Nov 2015 Location: albany, ny iTrader: (0)	Ok guys, some locals had a meet last night and decided to swing by to see what was going on, these guys learned to not sleep on the little diesel! Here are some vids Me vs a 375awhp subaru Vs. A 385rwhp 4th gen camaro Vs 135i from few weeks back Vs 335xi from few weeks back also Also ran down a new full bolt on wrx and an srt4 on e85 haaaahaha Enjoy guys, the potential of these cars are great
	Appreciate 2 Quote

02-21-2016, 05:00 PM	#31
BEWWWM I like to party 45 Rep 126 Posts Drives: 2011 335d Join Date: Sep 2015 Location: Tampa iTrader: (0)	Very impressed with your run against the manual modded LS1.
	Appreciate 0 Quote

02-21-2016, 05:10 PM	#33
BEWWWM I like to party 45 Rep 126 Posts Drives: 2011 335d Join Date: Sep 2015 Location: Tampa iTrader: (0)	LS1s are strong mid-top end, I agree you'd have held him off more from a more diesel friendly speed.
	Appreciate 0 Quote

03-01-2016, 10:49 AM	#34
petey_highboost Second Lieutenant 79 Rep 244 Posts Drives: '10 335D Join Date: Nov 2015 Location: albany, ny iTrader: (0)	Here's a dyno video, forgot to post one up! Installing the new intercooler kit tonight or tomorrow and I should have it back on the dyno next weekish, before I race the car at englishtown !
	Appreciate 2 Quote

03-07-2016, 07:25 PM	#35
petey_highboost Second Lieutenant 79 Rep 244 Posts Drives: '10 335D Join Date: Nov 2015 Location: albany, ny iTrader: (0)	I kinda like the way these wheels look! Drag radials will be mounted on these light weight sport edition wheels either tommorrow or Wednesday Attached Images
	Appreciate 1 Quote

03-07-2016, 07:43 PM	#36
32valves Captain 109 Rep 934 Posts Drives: 2011 335d sport Join Date: Mar 2014 Location: DC area iTrader: (0)	great vidoes
	Appreciate 0 Quote

03-08-2016, 11:53 PM	#38
petey_highboost Second Lieutenant 79 Rep 244 Posts Drives: '10 335D Join Date: Nov 2015 Location: albany, ny iTrader: (0)	Well, had a run in with a bolt on 2016 6MT mustang GT today.. Had intake, exhaust, headers, and a tune.. 30-130.. Here's the vid ! Looks like the intercooler helped out a little bit!
	Appreciate 0 Quote

03-10-2016, 11:31 AM	#39
petey_highboost Second Lieutenant 79 Rep 244 Posts Drives: '10 335D Join Date: Nov 2015 Location: albany, ny iTrader: (0)	Ready to rock! Attached Images
	Appreciate 1 Quote

03-10-2016, 11:32 AM	#40
petey_highboost Second Lieutenant 79 Rep 244 Posts Drives: '10 335D Join Date: Nov 2015 Location: albany, ny iTrader: (0)	Whoops posted same pic twice Attached Images
	Appreciate 0 Quote

03-10-2016, 12:15 PM	#41
iaknown Banned 425 Rep 1,040 Posts Drives: 335D Join Date: May 2013 Location: NJ iTrader: (1)	Nice! What wheel/tire size and offsets did you get?
	Appreciate 0 Quote