|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
CIC radio audio not working...
|
|
09-06-2019, 01:32 AM | #1 |
Lieutenant
211
Rep 519
Posts |
CIC radio audio not working...
Upgraded CCC>CIC retrofit yesterday. I ended up doing just the ncsexpert coding for now.
Apart from no audio for any radio stations. Edit: Issue resolved Retrofit was done with a US version CIC unit in Australian verison EU car. If you have no radio audio after default coding your CIC please check coding below RADIO_IBOC aktiv Last edited by TiAgAu; 02-12-2022 at 05:49 AM.. |
09-06-2019, 10:55 AM | #2 |
Private First Class
100
Rep 121
Posts |
Interesting, the FM/AM (including HD radio) is in the headunit in a CIC, and not on the MOST bus... Disclaimer, I've never done a MOST reset (or even used ISTA) but a brief google search suggests that the reset just has all the MOST devices re-establish communications after a disruption in the ring. Have you tried doing a factory default code to the CIC again?
Also, did your original CCC setup have an HD radio IBOC? I believe cars with HD radio had the antenna go to a module in the trunk that provided the FM/AM. Finally, I have to ask, did you check to see if your FM/AM antenna got disconnected? (The wire with the black Fakra connector in the lower left corner of the back of the CIC) |
Appreciate
0
|
09-06-2019, 05:21 PM | #3 | |
Lieutenant
211
Rep 519
Posts |
Quote:
CCC had no HD radio. I rechecked all connections the black antenna is definitely connected ok as the radio stations all show up. Disconnecting it you can not access any tuning. So its picking channels but as for audio no idea. Will try default CIC again i'll see how it goes. Thanks for your help. |
|
Appreciate
0
|
09-06-2019, 11:13 PM | #5 |
Private First Class
100
Rep 121
Posts |
I would've thought something else on the MOST ring isn't cooperating... (logic 7 amplifier in the back, combox, tcu, etc) but then all the audio would be out. I'm out of ideas, hopefully one of the other coding gurus might know what to do.
You could also try disconnecting the battery for a few minutes to power down everything? |
Appreciate
0
|
09-07-2019, 12:26 AM | #6 | |
Lieutenant
211
Rep 519
Posts |
Quote:
|
|
Appreciate
0
|
09-08-2019, 10:20 AM | #7 |
Private First Class
100
Rep 121
Posts |
Any chance ISTA messed with your region settings? You can compare your FSW_PSW settings with mine:
RADIO_DAB nicht_aktiv RADIO_IBOC aktiv RADIO_SDARS antdiag RADIO_WEATHERBAND nicht_aktiv COUNTRY us RADIO_COUNTRY us |
Appreciate
0
|
09-08-2019, 11:41 PM | #8 | |
Lieutenant
211
Rep 519
Posts |
Quote:
Good thinking! But all seems ok? All are nicht_aktiv and COUNTRY Australien RADIO_COUNTRY Australien Haha gotta love the spelling though. Test fitted the old CCC today and radio audio works fine. Didn't change coding at all. had a look at inpas uif while CCC was in CIC installed, VIN is all 0000000 maybe be normal with inpa? Dunno if it would affect anything as it was working even before being coded. Last edited by TiAgAu; 09-09-2019 at 01:14 AM.. |
|
Appreciate
0
|
09-09-2019, 01:23 AM | #9 |
Private First Class
100
Rep 121
Posts |
You said everything says nicht_aktiv? My RADIO_IBOC says aktiv, even though I don't have any special modules in the trunk (no special HD radio unit). Maybe you should try turning that on?
My INPA AIF looks the same, except being in German: Last edited by FaxData; 09-09-2019 at 01:28 AM.. |
Appreciate
1
TiAgAu210.50 |
09-09-2019, 06:31 PM | #10 | |
Lieutenant
211
Rep 519
Posts |
Quote:
Absolute Legend!!! Thanks heaps for your help. i would of never figured that out. Last edited by TiAgAu; 09-09-2019 at 06:47 PM.. |
|
Appreciate
0
|
09-10-2019, 02:03 AM | #12 |
Colonel
515
Rep 2,891
Posts |
That means that you got US version of the CIC. If you've got european or asian version ISTA recoding should be smooth.
__________________
E81 2007 130i 6cylinder Montego blue
Retrofits: Harman Kardon, High-beam assistant, Removable tow hitch. Auto-dim folding exterior mirrors. Lumbar support. Perfomance Brakes. |
Appreciate
0
|
09-10-2019, 03:30 AM | #13 | |
Lieutenant
211
Rep 519
Posts |
Quote:
Never heard any of them have this radio IBOC issue though. |
|
Appreciate
0
|
02-04-2021, 01:17 AM | #14 |
Lieutenant Colonel
1541
Rep 1,939
Posts |
Thank you so much! I mailed someone a US CIC to Australia and even after flashing euro firmware I had the same exact issue. Changing iboc to active fixed the issue!
|
Appreciate
0
|
02-04-2021, 01:55 AM | #15 |
Lieutenant
211
Rep 519
Posts |
Awesome as! Tbh i'm sure it was probably the default coding that made it nicht_aktiv. Anyway glad you found this thread.
Last edited by TiAgAu; 02-04-2021 at 03:43 AM.. |
Appreciate
0
|
02-12-2022, 02:25 AM | #16 | |
Private
11
Rep 54
Posts |
Quote:
In Same boat as you, retrofitting US CIC in aussie ccc e92. Did you also manage to get the ccc tv running on CIC? Any other tips to correct default coding would be appreciated as I see some gears are not quite working as before e.g. TV, CD changer, aircon config, halo lights settings etc... Also doesn't play dvds videos and I get a C560 code for video unit Cheers |
|
Appreciate
0
|
02-12-2022, 05:17 AM | #17 | |
Lieutenant
211
Rep 519
Posts |
Quote:
Eveything else works perfect, CD changer etc. Are you talking about AC config on the steering wheel buttons? I actually just finished up installing a combox today. Nice to play tracks from bluetooth/usb. If you need any help let me know. Last edited by TiAgAu; 02-12-2022 at 05:39 AM.. |
|
Appreciate
0
|
02-12-2022, 05:33 AM | #18 | |
Private
11
Rep 54
Posts |
Quote:
Back to cic, I am also installing Ista to get the MOST ring config sorted as I get a E1CF code as looks like protool cannot do that. Yes please steering buttons setup , how to sort that? So you didn't have to change anything else in default coding to get everything working properly? BTW I haven't done the FSC codes to activate Nav and voice and might not bother... |
|
Appreciate
0
|
02-12-2022, 06:11 AM | #19 | |
Lieutenant
211
Rep 519
Posts |
Quote:
Once i cooled down i thought i'd try pin 2 to pin 1 which it than powered up. Afaik the A/C SW controls don't work on CIC and not fixable. It was only a CCC feature. Yeah nav isn't great anyway tbh i wouldn't worry either Is you CD changer working? What coding have you done so far all FA/VO for combox etc? |
|
Appreciate
0
|
02-12-2022, 06:22 AM | #20 | |
Private
11
Rep 54
Posts |
Quote:
That small light next to auto gear knob stays on all the time when car is locked which means the ecu doesn't go to sleep. I can only relate it to the most E1CF fault. There was a thread how to sort it via Ista which I don't have so just checking alternative ways to sort that first. Did you come across this issue? |
|
Appreciate
0
|
02-12-2022, 06:34 AM | #22 | |
Private
11
Rep 54
Posts |
Quote:
Car is on charger so battery should be safe but Im not happy until this is sorted... |
|
Appreciate
0
|
Bookmarks |
|
|