[Sara]

Originally Posted by Jeff@topgearsolutions

I heard nudes?

[SkrApUNB]

don't use the baseball bat.. MJ has a roller. Do it right.. its easy. I did mine today. even took off my rear bumper. I was rubbing with no spacers. no i don't rub with 10mm spacers.

[Projekt_BooGie]

Originally Posted by Onurleft

A baseball bat. Easy as shyt

Originally Posted by abaynh1

explain method

maybe if it was on a beater I would suggest that. But I would really suggest doing it the right way.

Basically with the car on the ground, place the bat between the fender and the tire starting toward the rear of the car. Use a bat because the gap is bigger in the back and gets very small toward the front You can use different areas of the bar to get the right thickness.

Have a friend roll the car forward. With the bat resting on the tire, it will roll the opposite way as the tire and not scrape the fender but "roll" along it. Work a few inches then back the car up. Each time you roll forward, go a little bit further, using gradually more or less of the bat. Obviously, pressure down on the bat applies pressure up on the fender lip.

[Yodaime]

Originally Posted by Onurleft

A baseball bat. Easy as shyt

If you want chirp paint lol.

Originally Posted by SkrApUNB

don't use the baseball bat.. MJ has a roller. Do it right.. its easy. I did mine today. even took off my rear bumper. I was rubbing with no spacers. no i don't rub with 10mm spacers.

Right

Originally Posted by ACEE

maybe if it was on a beater I would suggest that. But I would really suggest doing it the right way.

Basically with the car on the ground, place the bat between the fender and the tire starting toward the rear of the car. Use a bat because the gap is bigger in the back and gets very small toward the front You can use different areas of the bar to get the right thickness.

Have a friend roll the car forward. With the bat resting on the tire, it will roll the opposite way as the tire and not scrape the fender but "roll" along it. Work a few inches then back the car up. Each time you roll forward, go a little bit further, using gradually more or less of the bat. Obviously, pressure down on the bat applies pressure up on the fender lip.

Right

[Onurleft]

if someone has a roller then absolutely use that, but those are pretty hard to come by.

Good to know someone local has one.


A premium import repair shop in ATL recommended me to use a wooden bat, granted my REAR fenders were thick enough to accomodate the risk of damage. I have seen infinitely more success stories in person then any unsuccessful stories. In fact, with all the lowered VIP cars in ATL i've never really heard of anyone using that method with regret.

[abaynh1]

Originally Posted by SkrApUNB

don't use the baseball bat.. MJ has a roller. Do it right.. its easy. I did mine today. even took off my rear bumper. I was rubbing with no spacers. no i don't rub with 10mm spacers.

good to know Mj is 135iiiiiiii right? if so I pm'd him today.

[Sara]

Originally Posted by abaynh1

good to know Mj is 135iiiiiiii right? if so I pm'd him today.

No Matt is 135iiiii

MJ is the guy with the red car that drove my car once

[Bakeme521]

Originally Posted by abaynh1

good to know Mj is 135iiiiiiii right? if so I pm'd him today.

Nope not the same person, dumbass.

[abaynh1]

Originally Posted by Bakeme521

Nope not the same person, dumbass.

Excuse me Mr. PERFECT I guess you never make a mistake!

(Dumb and Dumber reference)

[Sara]

Originally Posted by abaynh1

Excuse me Mr. PERFECT I guess you never make a mistake!

(Dumb and Dumber reference)

He'll never reach for cookies without thinking twice.

[abaynh1]

Originally Posted by Sara504

He'll never reach for cookies without thinking twice.

haha true dat

[Bakeme521]

Originally Posted by Sara504

He'll never reach for cookies without thinking twice.

haha good one I didn't catch that at first.

[Projekt_BooGie]

i'm so not leaving early next time!!!! hehehe

MJ has the red e36 w/the loud ass supercharger

[abaynh1]

Originally Posted by ACEE

i'm so not leaving early next time!!!! hehehe

MJ has the red e36 w/the loud ass supercharger

ahhhh thank you jonathan now i know who yall are talking about... thank you for being helpful unlike todd who makes comments that don't help at all

[Bakeme521]

Originally Posted by abaynh1

ahhhh thank you jonathan now i know who yall are talking about... thank you for being helpful unlike todd who makes comments that don't help at all

Sorry, I'm a nooooobbbbb.

[abaynh1]

Originally Posted by Bakeme521

Sorry, I'm a nooooobbbbb.

sound like guys on M3Forum...... Just search and you'll find the answer blah blah blah

[Sara]

Originally Posted by abaynh1

sound like guys on M3Forum...... Just search and you'll find the answer blah blah blah

Pssshh...thats what I say.

Why use search when you have forum members that'll do the research for you lol.. Same way with google and facebook.

[SkrApUNB]

Sorry for the long post. But i figure you guys and gal would wanna check it out....

So today i finally had time to get my rear fenders rolled. I am running 18 x 9.5 et40 squared on 255/35/18. I had no fender work done at all. I was rubbing enough to bug me.... so i got my hands on some 10mm spacers and got to rolling today.

Now i only rub on very large dips. :excited:

Set up is now. 18x9.5 et30 rear and et35 front. still on 255/35s all around.

Heres some pics of the progress.

Took the bumper off and cut out some of the fender liner. Well worth the 10 minutes taking the bumper off and putting it back on.



A little Flare




After the roll.





Went out a little later today and got some shots with my Camera.









I pulled a little too much but that just gives me room for a little more spacer :woot:

I have a few more things in the works for the car.. Until then. I hope you guys enjoy. Thanks for looking :hi:

[cd3]

Originally Posted by SkrApUNB

Went out a little later today and got some shots with my Camera.

Liking the stance

[SkrApUNB]

Thanks chip!

[Sara]

Burr its cold outside.

[Sara]

Brandon, are you on springs or coil overs?