E90Post
 


Extreme Power House
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > 29f2 code - replaced almost all fuel parts am I missing something?



Reply
 
Thread Tools Search this Thread
      08-13-2018, 12:55 AM   #1
535XrayIndigo
Enlisted Member
United_States
8
Rep
46
Posts

Drives: 128i
Join Date: May 2011
Location: Portland, Or

iTrader: (0)

29f2 code - replaced almost all fuel parts am I missing something?

Hey all,

I am getting a 29f2 code and rough startup. Almost like a misfire. However it goes away when the car goes to limp mode.

I have only Dual cone filters. No other mods.

Started running rough after hpfp replacement. I am thinking I got a bad one. If from the forums it appears this is code is common after replacing a hpfp. I also got cylinder 6 misfire so I replaced the injectors and the plugs and coils. I had a small leak from the lpf sensor line. Got that taken care of hoping that was it. Now I am at my wits end. Should I replace the hpfp again. Got it from FCPeuro so replacement cost is not a concern. I have seen injectors fix it for others. Misfire code is gone only the 29f2 code remains

Does anyone know exactly what causes this code?

Last edited by 535XrayIndigo; 08-14-2018 at 01:05 AM.
Appreciate 0
      08-13-2018, 08:29 PM   #2
535XrayIndigo
Enlisted Member
United_States
8
Rep
46
Posts

Drives: 128i
Join Date: May 2011
Location: Portland, Or

iTrader: (0)

After doing some research can anyone point me to a guide on how to reset hpfp adjustments?
Appreciate 0
      08-16-2018, 12:30 AM   #3
535XrayIndigo
Enlisted Member
United_States
8
Rep
46
Posts

Drives: 128i
Join Date: May 2011
Location: Portland, Or

iTrader: (0)

Bump.

Looking for some help here. All of the threads I can find on the 29f2 end abruptly once the op figures it out and/or moves on without sharing a solution or reference a thread or site that is no longer active.
Appreciate 0
      08-16-2018, 01:10 AM   #4
nOshi
C7 IND
nOshi's Avatar
Jamaica
10
Rep
235
Posts

Drives: TiAg E90 335i
Join Date: Apr 2011
Location: Central FL

iTrader: (4)

Man that sucks, I'd try another HPFP. Could diagnose better if you have BMW specific scan tool or tune to see the HPFP values. Could also be the low pressure fuel sensor.
__________________
TiAG E90 N54 335i | COBB | RB | FBO BUILD THREAD
Appreciate 0
      08-16-2018, 01:28 AM   #5
535XrayIndigo
Enlisted Member
United_States
8
Rep
46
Posts

Drives: 128i
Join Date: May 2011
Location: Portland, Or

iTrader: (0)

I currently have inpa. Is there not a way to do it with that?
Appreciate 0
      08-16-2018, 07:45 AM   #6
nOshi
C7 IND
nOshi's Avatar
Jamaica
10
Rep
235
Posts

Drives: TiAg E90 335i
Join Date: Apr 2011
Location: Central FL

iTrader: (4)

Quote:
Originally Posted by 535XrayIndigo View Post
I currently have inpa. Is there not a way to do it with that?
From memory I don't think INPA has the capability to display that info.
__________________
TiAG E90 N54 335i | COBB | RB | FBO BUILD THREAD
Appreciate 0
      08-16-2018, 10:55 AM   #7
535XrayIndigo
Enlisted Member
United_States
8
Rep
46
Posts

Drives: 128i
Join Date: May 2011
Location: Portland, Or

iTrader: (0)

I am going to try resetting adaptations. Do you know which adaptation manages open loop pressure.
Appreciate 0
      08-16-2018, 11:58 AM   #8
nOshi
C7 IND
nOshi's Avatar
Jamaica
10
Rep
235
Posts

Drives: TiAg E90 335i
Join Date: Apr 2011
Location: Central FL

iTrader: (4)

Quote:
Originally Posted by 535XrayIndigo View Post
I am going to try resetting adaptations. Do you know which adaptation manages open loop pressure.
That would be outside the scope of INPA. It can reset all the adaptions for the car. But that term is in reference to an adjustment value used in piggybacks ex jb4. Unless your using a piggyback flash it won't apply in your case.
__________________
TiAG E90 N54 335i | COBB | RB | FBO BUILD THREAD
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


All times are GMT -4. The time now is 10:02 PM.




e90post
Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST