[noname1]

Originally Posted by Karlos20945

Will Beemercode do the job? No yearly fee

No idea mate, I've only used Carly. LCI lights cost me £400 so I was more than happy with paying the fee knowing I could code them on my driveway in 5 minutes. I called multiple 'bmw coders' in my area and all of them advised I would need the updated FRM module. The fact a basic phone app can do what they can't with their 1000's of pounds worth of equipment made the fee seem more than fair. If it can be done for free with bimmercode then even better👍🏼

[mburns02]

Hey, looking for help with diagnosing a starting issue with my E92 (possible DDE fault) either available remotely (I have ISTA) or local to the North-east (Stockton-on-Tees specifically)

[whitep]

HI All, Can anyone help me code an injector if I install it? I simply cannot get inpa to work.

I am near Colchester.

[John the Hat]

I have a small problem. I have the Bimmergeek's software installed and I seem to be able to connect to the car (2010 325i E97) but I can't download the vin either in NCS Expert or in INPA. In INPA I get both battery & Ignition "spots" in black but the cable seems to drop the connection after a while & the Ignition one goes out.

Error typically:

Error in EDIABAS or in SG description file IFH-0003: Data transmission HOST/Interface CAS disrupted

Error COAPI4.CPP coapiReadOrder 4
[14:56:21.960] [2022-01-20] [SERIES] Error in EDIABAS or in SG description file FA_READ: A_E65CAS

That looks like a communications issue to me. Anyone know how to test the K+DCAN cable ? I have one off E-Bay which CLAIMS to be INPA compatible but I seem to have the com port set up on Windoze fine (although I am going to do a clean re-install in case it is messed up somehow). Failing that, anyone Cambs / Beds way have a known good cable we could test against ?

I am goingto crack this EVENTUALLY :-)

[razvandvl]

Hi,

Anyone can help me with some coding for a 2009 320d?
I need some advanced ones like I want to change the steering wheel, add cruise control, code a new key etc.

Anyone around London, Essex?

Many thanks,
Raz

[Divszy]

Looking for someone who can code around the west midlands, closer to coventry the better... Id like to have my front PDC's recoded (lost the coding when the headunit had to be replaced)

May also look at injectors in the future, too.

[marklee77]

looking for someone to code in noxem in kent orpington br6 area

[istilllooking2003]

Hello everyone,

I am new to the forum. Would someone please help me out with the following problem?

I have a bad MRS or Airbag module. I picked up one from the junkyard that I would like to work with my e90. I have downloaded and install NCS/INPA on my computer. Would someone happen to know of a step document or step video performing this task?

Is there someone out there that could do this remotely and I watch?

Thank you in advance for any advise.

[Matt_E90]

Aberystwyth, Wales.

Can offer basic coding (still learning)
I can also offer help with retrofits, wiring etc

[Arch Stanton]

Any coders in the NW (Ideally Cheshire or North Staffs) areas that I can DM with?