|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
weird humming noise from turbos?
|
|
12-04-2018, 10:58 PM | #1 |
Private First Class
39
Rep 167
Posts |
weird humming noise from turbos?
I'm getting this low frequency humming when i slightly press the gas pedal ( stationary/not driving). Maybe to describe it better it's more of a heavy/ deep air flow sound
it sounds like it could be the wastegate? Any experience with such a thing? |
12-05-2018, 06:28 AM | #2 |
BRR tuned
220
Rep 646
Posts |
stock or tuned? intake or stock filter?? need more info than that...
when i was stock and i modified my air box it would make a hollow thudding noise that went with the pistons... i liked it, but i could only really point it to be from the EGR opening an low throttle.. now that i am tuned my setup is still the same and the sound is gone..
__________________
BRR tuned and loving it!
|
Appreciate
0
|
12-07-2018, 08:42 AM | #4 |
Private First Class
39
Rep 167
Posts |
i may have solved it... although not exactly sure why.
I adjusted the two locking nuts on the wastegate rod. I haven't heard this turbulant humming noise since I did this. |
Appreciate
0
|
12-07-2018, 02:44 PM | #5 |
BRR tuned
220
Rep 646
Posts |
i don't know the specs on that rod, but you might want to figure out if it is in spec.. there is a thread by TDI somewhere.. it one of the big ones.. .
__________________
BRR tuned and loving it!
|
Appreciate
0
|
12-08-2018, 10:35 PM | #6 |
Private First Class
39
Rep 167
Posts |
well after a few more days of driving, Its definetely this waste gate rod adjustment. I still have the humming but it's not as loud now and it doesn't hum and go away periodically on it's own. it's pretty much always humming but not as loud.
I have to find TDI's post... this will take hours |
Appreciate
0
|
12-10-2018, 06:42 AM | #7 |
BRR tuned
220
Rep 646
Posts |
__________________
BRR tuned and loving it!
|
Appreciate
0
|
12-18-2018, 10:38 AM | #9 | |
Private First Class
39
Rep 167
Posts |
Quote:
The long rod is for turbo switch over? I thought it was for the wastegate? |
|
Appreciate
0
|
12-19-2018, 12:07 AM | #10 | |
Second Lieutenant
43
Rep 281
Posts |
Quote:
Waste gate rod is tucked between the large turbo snail halves--hard to reach and adjust as Yozh said. The one you can easily see and adjust with airbox removed is turbine switchover valve.
__________________
SLOW & SMOKEY. My car loses to every Chevy Malibu unless I mash the throttle.
Mods: *ATM 304SS Turbo-back exhaust, w/ ox-cat *ATM stepped intercooler *ATM silicone tubing kits (hot & cold sides) JR 2.8 tune *Whitbread CP3R90 HPFP *AArod EGR racepipe*Execuhitch hidden hitch *Stage 3 transmission tune |
|
Appreciate
0
|
Bookmarks |
|
|