|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
DIY: Setup BMW Standard Tools 2.12 on Windows XP > 10
|
|
03-03-2021, 03:01 PM | #815 |
Registered
0
Rep 3
Posts |
|
Appreciate
0
|
03-03-2021, 03:04 PM | #816 |
Major
265
Rep 1,173
Posts |
|
Appreciate
0
|
03-18-2021, 02:24 PM | #818 |
Lieutenant
332
Rep 400
Posts
Drives: 2011 e91 328i RWD
Join Date: Jan 2021
Location: Chicago Area
|
Newbie here hunting for my future e91 here in the Midwest USA. I'm planning on bootcamping an old Macbook for Windows XP (I have the disc) to do basics such as INPA, etc.
But first, I'm going to order a new SSD internal drive so any anybody tell me how big a drive I might need for BMW diagnotics and coding purposes? I'm an old e30 guy now hankering to spend more on fuel, repairs, maintenance, etc and otherwise re-enjoy the BME experience! Thanks!! |
Appreciate
0
|
03-18-2021, 03:34 PM | #819 | |
Major
265
Rep 1,173
Posts |
Quote:
Also, I'd go with a supported version of Windows instead of XP. All of these programs will work with Windows 10. |
|
Appreciate
1
Mike K332.00 |
03-18-2021, 06:51 PM | #820 | |
Lieutenant
332
Rep 400
Posts
Drives: 2011 e91 328i RWD
Join Date: Jan 2021
Location: Chicago Area
|
Quote:
|
|
Appreciate
0
|
11-22-2021, 08:49 PM | #822 |
Major
265
Rep 1,173
Posts |
|
Appreciate
0
|
12-07-2021, 04:07 PM | #823 |
Registered
0
Rep 1
Posts |
@Joe
Hey Joe,
after following your guide, i got somehow stuck at updating the WinKFP i get that error: https://ibb.co/8K4GNns Is that a problem?! I installed it on WIN10; thanks for your help. But all the tools are starting well; trying to solve the issue with my FTDI chip USB Cable... |
Appreciate
0
|
12-07-2021, 04:20 PM | #824 | |
Second Lieutenant
78
Rep 244
Posts
Drives: 2006 330i Manual
Join Date: Nov 2016
Location: Detroit
|
What if you get bimmergeeks standard tools? Unless that's what you used, I never had any errors using their download.
Quote:
|
|
Appreciate
0
|
04-15-2022, 12:24 PM | #825 |
Second Lieutenant
7
Rep 204
Posts
Drives: 2008 M3 E92, 2007 335Xi E90
Join Date: Feb 2012
Location: Central Vermont
|
offering the remote install service?
|
Appreciate
0
|
07-27-2022, 04:30 PM | #826 |
Registered
0
Rep 1
Posts |
Hi everyone, I hope someone may be able to help me with an odd error!
I have followed the procedure in the OP to install the software and I'm using a silver cable from B-Cables and all appeared to be working okay. I have just replaced the parking brake actuator (EMF module) under my 2008 X70 X5 and there is still an error on the dash. I tried to code the VIN using NCS-Expert and I can get the VIN from the CAS but the job fails when attempting to write to the EMF. Further investigation reveals that the EMF appears in INPA, but I get a IFH-0009 No Response From Controller message. INPA connects fine to various other modules in the same vehicle. I have confirmed with the refurbishers that the module was tested and working on another vehicle before it was dispatched to me and I have visually inspected the loom tail and plug which seems to be in good condition and checked for 12V at the main live and neutral terminals. So, any ideas? Something funky with my cable? Daten issues? I've found a handful of references to similar behaviour but all the threads dead end without resolution. Thanks! |
Appreciate
0
|
12-03-2022, 03:57 AM | #829 |
Registered
0
Rep 1
Posts |
WinKFP and tool32/NCS
Hey!... so i got it installed but i got some "problems"
NCS only have Factory Reset and Feature Coding in the profile.. WinKFP i get error Error 1: CoapiKfInit: Initialization error! Tool32 is in german.. the one i had in the past was in english menu and german rest |
Appreciate
0
|
01-01-2023, 08:35 PM | #830 |
Registered
0
Rep 1
Posts |
BMW Coding Tool - Invalid Picture Error
If you are seeing this error, you may have an invalid value specified in your TMP and TEMP environment variables. This is likely due to conflicting installation instructions which guided you to update those values. Undo that update by removing ";C:\EDIABAS\Bin" from those variables and the error should go away. That's what worked for me. Good luck!
|
Appreciate
0
|
09-13-2023, 10:58 PM | #831 | |
New Member
2
Rep 17
Posts |
Quote:
|
|
Appreciate
0
|
09-15-2023, 03:53 PM | #832 |
Private First Class
6
Rep 103
Posts |
Link no longer works. Anyone have a current link to download the software? I need to do a ABS/DSC module brake fluid bleed, and seems like activating the pump usong INPA is the only real way to do it right. Thanks
|
Appreciate
0
|
04-17-2024, 04:48 PM | #835 |
New Member
3
Rep 15
Posts |
INPA & ISTA+
I have INPA & ISTA+ which work fine on my 2008 E93. However, I can't get either to work on my friends 2007 E83 X3.
Neither application will recognize the X3. Even manually entering the chassis number doesn't work. Do I need some specific data files for the E83 ? We have fitted a passenger seat occupancy bypass but still have the airbag light on. Any suggestions ? |
Appreciate
0
|
04-17-2024, 11:39 PM | #836 | |
Registered
0
Rep 4
Posts |
Quote:
You might have to hunt down the right versions. Try to hunt down BimmerGeeks INPA version. Inobu |
|
Appreciate
0
|
Bookmarks |
Tags |
coding, inpa, ncs, tool32, winkfp |
|
|