[rm]

Hello
I have a 2006 330I, a while ago my CCC malfunctioned and had to be replaced, so I got the 2008 updated version CCC which has the programmable buttons. Today I had a little tire pressure loss, and the flat tire warning came on, so after I reinflated the tire I wanted to reset the FTM so I entered the iDrive settings as I was used to with my old CCC and instead of FTM there is TPM and it is greyed out so I couldn't reset the warning. What should be done? Please help

[Dracon]

Originally Posted by rm

Hello
I have a 2006 330I, a while ago my CCC malfunctioned and had to be replaced, so I got the 2008 updated version CCC which has the programmable buttons. Today I had a little tire pressure loss, and the flat tire warning came on, so after I reinflated the tire I wanted to reset the FTM so I entered the iDrive settings as I was used to with my old CCC and instead of FTM there is TPM and it is greyed out so I couldn't reset the warning. What should be done? Please help

Sounds like the new CCC wasn't properly coded to your vehicle. You need to have the CCC recoded to your vehicle.

[rm]

Okay thank you for the reply. Is there any particular aspect which should be recoded or the whole thing should be done from scratch?

P.S. Also voice command not working, AUX not working, and the PDC shows broken on the right navigation split screen instead of the whole screen. All of this happened after replacing CCC.

[Dracon]

Originally Posted by rm

Okay thank you for the reply. Is there any particular aspect which should be recoded or the whole thing should be done from scratch?

P.S. Also voice command not working, AUX not working, and the PDC shows broken on the right navigation split screen instead of the whole screen. All of this happened after replacing CCC.

Sounds like you need a complete recoding and someone to also reload the FSC codes into it as well.

That'll enable voice command (which is enable via FSC) and should fix all of issues you describe.

[rm]

Okay thank you again. I will send the car for recoding soon and I will post back the results.

[rm]

Hello
I got the car back back from recoding and the FTM seems to work along with the AUX and the PDC. The voice control couldnt be coded and the problem is that they couldnt access my CCC for coding from my car so they took it off installed it in another similar car then redoded it and put it back in my car. They counldnt find out why the scanner is not communicating with my CCC. This is a problem, any suggestions would be appreciated.
Thank You

[ey2001]

i got my CCC replaced also... i have same issues as you. i am taking it back to the shop... the voice command is not working and the FTM show TPM and its grayed out... what did you end up doing?

[tturbolife]

Originally Posted by rm

Hello
I got the car back back from recoding and the FTM seems to work along with the AUX and the PDC. The voice control couldnt be coded and the problem is that they couldnt access my CCC for coding from my car so they took it off installed it in another similar car then redoded it and put it back in my car. They counldnt find out why the scanner is not communicating with my CCC. This is a problem, any suggestions would be appreciated.
Thank You

sounds like they don't know what they are doing