[chez83red]

So after modding all my lights to LED'S / LED Blacklines tail lights / Weisslight Mid Turns / Jlevi LED Front Turn Signals, then going to change my OEM bulbs for my Angel Eyes.. come to find out I cannot open them... since they are factory sealed.......FML.........

I'M stuck what to do next... thought about getting rims..... any ideas...... would great appreciation



2006 E90 Sedan / Sports package/ Logic 7/ Performance exhaust/ Splitters/ LED Blacklines/ LED mid & front turn signals/ matte black kidney grills/ weisslight LED License plate/ 15% Formula ONE Tint/ Adaptive HID

[zeenon53]

Open them anyway like everyone else has.

[chez83red]

Originally Posted by zeenon53

Open them anyway like everyone else has.

is their a link to do that lol, DIY?

?

[tmo24]

Originally Posted by chez83red

is their a link to do that lol, DIY?

?

Do they not have two tabs to release the little box/cover? One tab on each side. You need to pry with a flathead and wiggle.

[pruettfan]

I just did this today. There are tabs on the top and bottom of the cover that have to be pryed with a screwdriver to get them open. They are not sealed from the factory they are designed so you can change the bulb because bulbs burn out. You will need a long flat thin screwdriver to get to the tabs.

Changing to Mtec bulbs made my angel eyes turn very bright and white.

[XieJin]

1. go to the trunk of u car.
2. open the toolset lid on the right hand side
3. take flathead screwdriver
4. pop the lid
5. see http://www.reveuro.com/inventory/102...-m3-bmw.46.JPG on the outer corners of the lid there are indentations, put ur screwdriver there, pry a bit until u see it coming out, do the same on the other side, VOILA done.

[chez83red]

Originally Posted by XieJin

1. go to the trunk of u car.
2. open the toolset lid on the right hand side
3. take flathead screwdriver
4. pop the lid
5. see http://www.reveuro.com/inventory/102...-m3-bmw.46.JPG on the outer corners of the lid there are indentations, put ur screwdriver there, pry a bit until u see it coming out, do the same on the other side, VOILA done.

Sweet! I hope your right I will check in the morning... I was lil disappointed bc I ask a fellow tech, about the issue. And told me they were sealed bc of my yr of the car...06 hopeful this is not the case_

[SV Concepts III]

His headlights will not be like that since it is an E90 Sedan. If you have OE xenons, then you go through the wheel well on E90 pre-LCI sedans to get access to the angel eye bulbs.

[Alex]

Originally Posted by Nick@Jlevi SW

His headlights will not be like that since it is an E90 Sedan. If you have OE xenons, then you go through the wheel well on E90 pre-LCI sedans to get access to the angel eye bulbs.

I'm in the process of doing to my pre-LCI E90 but, for the life of me, I cannot open the plastic cover to access the angel eye bulbs...

You guys got any tips? I'm afraid I might break the tabs if I pry them too much.

[bob.g]

take a look here, i thought it was gonna be a b*tch when i did mine but it came out easy once you see how its done.
http://www.namotorsports.net/docs/LU...tallations.pdf