[Cheshire535d]

Hi all,

Just wanted to say thanks for all the info in this thread.

I've just retrofitted logic 7 to my E61 using the info on here and it's all gone smoothly and works great!

Coding was easy just changed from standard to top hifi and then had working audio and eq settings

Ta ��

[VickyK]

Originally Posted by Cheshire535d

Hi all,

Just wanted to say thanks for all the info in this thread.

I've just retrofitted logic 7 to my E61 using the info on here and it's all gone smoothly and works great!

Coding was easy just changed from standard to top hifi and then had working audio and eq settings

Ta ��

Cheers!

[nexus1968]

Hi, i’m going to add in my e91 lci 2009 with base audio system, cd changer and logic 7 13 speaker with oem wirings cables, already changed 11 speaker, remain the 2 rectangular in the back head line; don’t understand where insert the fiber optic cable in the ring….for logic 7 and cd changer.

[ptpending]

Originally Posted by nexus1968

Hi, i’m going to add in my e91 lci 2009 with base audio system, cd changer and logic 7 13 speaker with oem wirings cables, already changed 11 speaker, remain the 2 rectangular in the back head line; don’t understand where insert the fiber optic cable in the ring….for logic 7 and cd changer.

under left rear seat side insert (between seat and door) it is removable from up to down, push the fingers under seatbelt plastic and pull this cover

[nexus1968]

Ok thanks but i mean the correct pin on the fiber block, i have: cic radio professional, mulf, logic 7, cd changer.

[VickyK]

Originally Posted by nexus1968

Ok thanks but i mean the correct pin on the fiber block, i have: cic radio professional, mulf, logic 7, cd changer.

Hi. Check the fiber cables closely. Each is uniquely IDed , AMP, CCC, etc. Its printed on the cable.

[ptpending]

Originally Posted by nexus1968

Ok thanks but i mean the correct pin on the fiber block, i have: cic radio professional, mulf, logic 7, cd changer.

the physical architecture of the most cables is ring, that means that one cable is going from one unit to another and second cable is going from unit you connecting to, to next unit
so you need to remove and shift (insert in the next free slot) one cable which is going to headunit in the most concentrator, and insert both your cables (one from one side and one from another side) so that amp will be included in the loop
there is myriad of the MOST insertion howtos and pictures in google and internet

[nexus1968]

Ok now it’s all clear, everythings wired oem logic 7 is functioning but cd changer not, it’s a very lot of work as VickyK said but satisfactiion is the winner partially, because respecting the rule of the ring i have do this sequence…..cic-mulf-logic 7-cd changer…..but cd changer i’m not able to code correctly, logic 7 i code for miracle surprising myself, but cd changer i spend four hours and try retry again and over but nothing; asking you if can write step by step, like: open ncsexpert load manipulation profile clic on this and over so and so…..please someone.

[VickyK]

Originally Posted by nexus1968

Ok now it’s all clear, everythings wired oem logic 7 is functioning but cd changer not, it’s a very lot of work as VickyK said but satisfactiion is the winner partially, because respecting the rule of the ring i have do this sequence…..cic-mulf-logic 7-cd changer…..but cd changer i’m not able to code correctly, logic 7 i code for miracle surprising myself, but cd changer i spend four hours and try retry again and over but nothing; asking you if can write step by step, like: open ncsexpert load manipulation profile clic on this and over so and so…..please someone.

Is cd changer something that you added or came originally with the car? This install shouldn't have any effect on the cd changer.

[nexus1968]

Ok mr VickyK, no it’s a retrofit for logic 7 and cd changer, my 330xd touring 09 was stock with base orrible system, and logic 7 with lucky is working after coding in ncsexpert but cd changer after many try and try again nothing in any way.

[nexus1968]

Really need a step by step guide please.

[VickyK]

Originally Posted by nexus1968

Ok mr VickyK, no it’s a retrofit for logic 7 and cd changer, my 330xd touring 09 was stock with base orrible system, and logic 7 with lucky is working after coding in ncsexpert but cd changer after many try and try again nothing in any way.

Ok. So the cd changer was added by you. Ok first the vehicle order needs to be added with S672A on the CAS and nFRM.

Next you need to code the CIC parameter - search for "CDC" and change from nicht_activ to activ

Coding procedure is the same like how you did for L7

[nexus1968]

$672 or $672A….? perhaps is this the mistake i do, and also not only in cas but + nrfm…..i’m ansious to try.
thanks for now, but don’t disappear…!!!

[nexus1968]

No VickyK, not working anymore, please write a step by step guide if you have more patience ….
best regards

[nexus1968]

I have process the ecu kombi for error and now the cruise control got error and not working, now it’s a serious problem…..please help

[VickyK]

Originally Posted by nexus1968

I have process the ecu kombi for error and now the cruise control got error and not working, now it’s a serious problem…..please help

How is the cruise control - Kombi Module gets effected when you are only processing CIC module? It doesnt make sense. Are you sure you flashed the correct module?

If you did, use NCS expert to default code back the module. It will revert back the ECU programming back to stock.

[nexus1968]

Ok but where is the default code for kombi ecu…?

[nexus1968]

Originally Posted by acidbbg View Post
This is the correct guide..Thanks for the confirmation BMW..

1. Load NCSExpert.
2. Load Profile and select Expertmode
3. F1 (VIN/ZCS/FA)
4. F3 (ZCS/FA f .ECU)
5. Choose E89 (for the E9X)
6. Select CAS
7. F6 (BACK)
8. F4 (Process ECU)
9. Select the Module I want to Revert back to Stock.
10. F2->Choose "SG_Codieren->ok
11. F3->to start coding the ecu with factory settings according to the vehicle VO.

[nexus1968]

This saved my a.. !
Remain the cd changer not working ufffff

[nexus1968]

I would need a guide similar to this.

[VickyK]

Originally Posted by nexus1968

This saved my a.. !
Remain the cd changer not working ufffff

Meaning you coded kombi instead of CIC by mistake?

Look firstly explain what did you do to wire up the cd changer. Secondly see the modules in INPA. Does the system recognise the CD changer? Check that first.

If it sees the module, it's matter of CIC communicating with it. The fiber optics you added for cd changer or not?

If fiber is there for cd changer, and inpa sees the device, its better off code default CIC to factory. Because you added the VO for CD changer in the CAS &NfRM, the car will know CIC requires it and therefore codes it accordingly. Take note, default code the CiC only when you are sure the VO for Logic7 and CD changer is there.

[nexus1968]

Ok solved….after and during a mystic pray it’s all done and working logic 7 + cd changer, i think the mistake was that when i recode to stock the cic it don’t recode the correct cic.c1a for my car, but cic.c09…..and now uaaaauuu good logic 7 and cd changer; i’m a little scared if disconnecting/changing the battery, all of this settings disappear…..what do you think..?
regards VickyK and all of this forum for the patience.