ELP

ISPEEDM3 · 03-09-2010, 08:35 PM

cant wait to see some pics!!!!

robnval · 03-10-2010, 08:34 AM

yea may have hit another bump in the road... the cr had a meltdown this morning....

Drove about 2 blocks, cheeck engine light started flashing... idle got rough (between 500-1100rpms)... car almost stalled! I limped to work (another 2 miles)... right as I pulled into the parking lot, the light went off and the car ran normally.?. WTF?!?!

Any ideas?

Gonna try to get it to BMW this coming week to have them scan it... Felix, gonna have to take the jb3 back to stock mode and ensure we dont have any codes at some point early next week before it goes in

Rob

wstxoutlaw · 03-10-2010, 01:09 PM

Quote:

Originally Posted by robnval

yea may have hit another bump in the road... the cr had a meltdown this morning....

Drove about 2 blocks, cheeck engine light started flashing... idle got rough (between 500-1100rpms)... car almost stalled! I limped to work (another 2 miles)... right as I pulled into the parking lot, the light went off and the car ran normally.?. WTF?!?!

Any ideas?

Gonna try to get it to BMW this coming week to have them scan it... Felix, gonna have to take the jb3 back to stock mode and ensure we dont have any codes at some point early next week before it goes in

Rob

Yea, for sure Rob let me know when. Damn that sucks. Sounds like a similar problem my boy was having on his 08' and JB3. From what I remember I believe he told me they updated his software and it was running smooth after that; would still go into limp mode, but no more rough idle. That's when he changed over to Vish and smooth sailing after that ???

robnval · 03-10-2010, 01:46 PM

yea idk bro.. this is the first time it got bad like this... I did however have that cel before. eitherway, i gotta figure it out cause it was running like absolute shit!

gsr1416 · 03-10-2010, 09:10 PM

im local and interested in getting jb3 for my car... well see when we all can meet up sio i can check out your alls whips...

wstxoutlaw · 03-10-2010, 11:01 PM

Sounds good gsr! Days are windy as hell right now, hopefully we get lucky on our next meet with this weather man!

robnval · 03-11-2010, 09:47 PM

When is the next meet?

Oyea, new rule Felix... post here before you sell parts man!!! I would have took those roundels off of you brother!

wstxoutlaw · 03-11-2010, 11:14 PM

Quote:

Originally Posted by robnval

When is the next meet?

Oyea, new rule Felix... post here before you sell parts man!!! I would have took those roundels off of you brother!

Haha, you got it Rob! Way ahead of you brotha, if you're looking for the blk cf/wht, I have another set for ya!

Yup, yup it's meet and greet time, what you think Isaac? Let's get this thing going! Need a nice parking area and some good food woot woot!!!

wstxoutlaw · 03-11-2010, 11:16 PM

Oh yea, sold the stockers yesterday too!!! Woot wooo, more money for parts muhahahaaa!

Shhhh, don't tell wifey!!!

gsr1416 · 03-12-2010, 02:01 PM

looking to buy some wheels if any of you all are selling some lmk.. thanks

wstxoutlaw · 03-12-2010, 02:05 PM

Quote:

Originally Posted by gsr1416

looking to buy some wheels if any of you all are selling some lmk.. thanks

What up gsr! I'll be selling mine here in a couple of weeks as soon as I get my b9's back on if you're interested let me know!

robnval · 03-12-2010, 05:24 PM

felix, i need those roundels bro! So my wheels got pushed back til Weds due to tire issues and the coating taking longer than expected but by next weekend my car should be straight!

gsr, there is a set of VMRs for sale in Austin for 850 if you dont mind going to get them... if you want something alittle bigger named, my BBS' may end up for sale for the right money if I can get this deal on something else I been spying

Rob

gsr1416 · 03-12-2010, 06:23 PM

Quote:

Originally Posted by wstxoutlaw

What up gsr! I'll be selling mine here in a couple of weeks as soon as I get my b9's back on if you're interested let me know!

what kind are they? pics and specs? hook up price since i'm local..lol?

wstxoutlaw · 03-12-2010, 06:36 PM

I believe the size is 19x8.5 19x9.5 MRR GT-1 wheel. You can see pic on this thread, page 5 I think (white 335) and I took a vid after we left the stealership to see the drop on it. YouTube - search wstxoutlaw and you can see how they look. lmk Or just txt me up I'll meet up with you 525.1121 Felix

wstxoutlaw · 03-12-2010, 07:38 PM

Quote:

Originally Posted by robnval

felix, i need those roundels bro! So my wheels got pushed back til Weds due to tire issues and the coating taking longer than expected but by next weekend my car should be straight!

gsr, there is a set of VMRs for sale in Austin for 850 if you dont mind going to get them... if you want something alittle bigger named, my BBS' may end up for sale for the right money if I can get this deal on something else I been spying

Rob

Nice Rob, can't rush perfection right haha... Car's gonna look sick man! No prob. on the roundels they're meant for an e90 too so there shouldn't be any issue with fitment.

They're blk cr/wht

gsr1416 · 03-14-2010, 12:08 AM

well i went to get tint today on my car at some place on the eastside... and to make a long story short the idiot scratched up both of my qtr panels on my jb 335... all this was done apparently when he was rubbing on my car as he was cutting tint for the rear window... from the looks of it it seems the razor blade or something was in his front pocket and fu*ked up my car....so can any of you all recommend a local detailer to take them out or polish them..??

robnval · 03-14-2010, 09:20 AM

I use C&M bodyshop... talk to Miguel, he has always squared me away..

gsr1416 · 03-14-2010, 03:26 PM

Quote:

Originally Posted by robnval

I use C&M bodyshop... talk to Miguel, he has always squared me away..

Has he ever polished ur jb 335? Just paranoid about taking it and coming backk with buffer swirls or holograms... Thx

wstxoutlaw · 03-14-2010, 04:48 PM

Let's get something going this coming weekend Sat or Sun!!!

Rob you should have your wheels by then right?? Weather looks killer for a meet!! Spread the word!!!

robnval · 03-15-2010, 10:50 AM

Quote:

Originally Posted by gsr1416

Has he ever polished ur jb 335? Just paranoid about taking it and coming backk with buffer swirls or holograms... Thx

Yea he has done my jb 335 and my wifes 09 yukon... his work is top knotch. He is doing my boy's z06 right now. If you stop in there tell him Batz sent you and he will do you right bro!

Felix... not sure man, this tire shit is a pain in the ass!

ISPEEDM3 · 03-15-2010, 09:02 PM

hey guys i meet up with a guy that has an active kit on his 335.. he is pushing about 450 ponies.. maybe he will meet up with us next time.

wstxoutlaw · 03-16-2010, 11:48 AM

Quote:

Originally Posted by ISPEEDM3

hey guys i meet up with a guy that has an active kit on his 335.. he is pushing about 450 ponies.. maybe he will meet up with us next time.

Damn that's a lot of ponies, gotta see that! I met a pretty cool dude out here on the East side that's down for the meet also. Had a jb 335 fresh out the box, still rocking the paper plates and all. What day works out for most of us, let's get this next meet going!!!!

03-09-2010, 08:35 PM	#111
ISPEEDM3 Got Boost? 7 Rep 61 Posts Drives: M3 Turbo Join Date: Jan 2009 Location: el paso, tx iTrader: (0)	cant wait to see some pics!!!!
	Appreciate 0 Quote

03-10-2010, 08:34 AM	#112
robnval Lieutenant 38 Rep 449 Posts Drives: Java Green F80 Join Date: Nov 2009 Location: Tampa FL iTrader: (5)	yea may have hit another bump in the road... the cr had a meltdown this morning.... Drove about 2 blocks, cheeck engine light started flashing... idle got rough (between 500-1100rpms)... car almost stalled! I limped to work (another 2 miles)... right as I pulled into the parking lot, the light went off and the car ran normally.?. WTF?!?! Any ideas? Gonna try to get it to BMW this coming week to have them scan it... Felix, gonna have to take the jb3 back to stock mode and ensure we dont have any codes at some point early next week before it goes in Rob
	Appreciate 0 Quote

03-10-2010, 01:46 PM	#114
robnval Lieutenant 38 Rep 449 Posts Drives: Java Green F80 Join Date: Nov 2009 Location: Tampa FL iTrader: (5)	yea idk bro.. this is the first time it got bad like this... I did however have that cel before. eitherway, i gotta figure it out cause it was running like absolute shit!
	Appreciate 0 Quote

03-10-2010, 09:10 PM	#115
gsr1416 Second Lieutenant 41 Rep 255 Posts Drives: Space Gray 335i E93 Join Date: Jan 2010 Location: nm/co iTrader: (2) Garage List 2011 BMW 135i [0.00]	im local and interested in getting jb3 for my car... well see when we all can meet up sio i can check out your alls whips... __________________ Current: 2013 Bmw S1000rr 2008 Space Gray E93 2012 Ducati 848 Evo 2013 Audi a4
	Appreciate 0 Quote

03-10-2010, 11:01 PM	#116
wstxoutlaw Great, another ticket!!! 40 Rep 563 Posts Drives: e92 M3.... and a Wheelchair Join Date: Feb 2009 Location: El Paso, Texas iTrader: (11)	Sounds good gsr! Days are windy as hell right now, hopefully we get lucky on our next meet with this weather man! __________________ e60M5 with absolutely no mods Mr. Dealer...
	Appreciate 0 Quote

03-11-2010, 09:47 PM	#117
robnval Lieutenant 38 Rep 449 Posts Drives: Java Green F80 Join Date: Nov 2009 Location: Tampa FL iTrader: (5)	When is the next meet? Oyea, new rule Felix... post here before you sell parts man!!! I would have took those roundels off of you brother! Last edited by robnval; 03-11-2010 at 09:58 PM..
	Appreciate 0 Quote

03-11-2010, 11:16 PM	#119
wstxoutlaw Great, another ticket!!! 40 Rep 563 Posts Drives: e92 M3.... and a Wheelchair Join Date: Feb 2009 Location: El Paso, Texas iTrader: (11)	Oh yea, sold the stockers yesterday too!!! Woot wooo, more money for parts muhahahaaa! Shhhh, don't tell wifey!!! __________________ e60M5 with absolutely no mods Mr. Dealer...
	Appreciate 0 Quote

03-12-2010, 02:01 PM	#120
gsr1416 Second Lieutenant 41 Rep 255 Posts Drives: Space Gray 335i E93 Join Date: Jan 2010 Location: nm/co iTrader: (2) Garage List 2011 BMW 135i [0.00]	looking to buy some wheels if any of you all are selling some lmk.. thanks __________________ Current: 2013 Bmw S1000rr 2008 Space Gray E93 2012 Ducati 848 Evo 2013 Audi a4
	Appreciate 0 Quote

03-12-2010, 05:24 PM	#122
robnval Lieutenant 38 Rep 449 Posts Drives: Java Green F80 Join Date: Nov 2009 Location: Tampa FL iTrader: (5)	felix, i need those roundels bro! So my wheels got pushed back til Weds due to tire issues and the coating taking longer than expected but by next weekend my car should be straight! gsr, there is a set of VMRs for sale in Austin for 850 if you dont mind going to get them... if you want something alittle bigger named, my BBS' may end up for sale for the right money if I can get this deal on something else I been spying Rob
	Appreciate 0 Quote

03-12-2010, 06:36 PM	#124
wstxoutlaw Great, another ticket!!! 40 Rep 563 Posts Drives: e92 M3.... and a Wheelchair Join Date: Feb 2009 Location: El Paso, Texas iTrader: (11)	I believe the size is 19x8.5 19x9.5 MRR GT-1 wheel. You can see pic on this thread, page 5 I think (white 335) and I took a vid after we left the stealership to see the drop on it. YouTube - search wstxoutlaw and you can see how they look. lmk Or just txt me up I'll meet up with you 525.1121 Felix __________________ e60M5 with absolutely no mods Mr. Dealer...
	Appreciate 0 Quote

03-14-2010, 12:08 AM	#126
gsr1416 Second Lieutenant 41 Rep 255 Posts Drives: Space Gray 335i E93 Join Date: Jan 2010 Location: nm/co iTrader: (2) Garage List 2011 BMW 135i [0.00]	well i went to get tint today on my car at some place on the eastside... and to make a long story short the idiot scratched up both of my qtr panels on my jb 335... all this was done apparently when he was rubbing on my car as he was cutting tint for the rear window... from the looks of it it seems the razor blade or something was in his front pocket and fu*ked up my car....so can any of you all recommend a local detailer to take them out or polish them..?? __________________ Current: 2013 Bmw S1000rr 2008 Space Gray E93 2012 Ducati 848 Evo 2013 Audi a4
	Appreciate 0 Quote

03-14-2010, 09:20 AM	#127
robnval Lieutenant 38 Rep 449 Posts Drives: Java Green F80 Join Date: Nov 2009 Location: Tampa FL iTrader: (5)	I use C&M bodyshop... talk to Miguel, he has always squared me away..
	Appreciate 0 Quote

03-14-2010, 04:48 PM	#129
wstxoutlaw Great, another ticket!!! 40 Rep 563 Posts Drives: e92 M3.... and a Wheelchair Join Date: Feb 2009 Location: El Paso, Texas iTrader: (11)	Let's get something going this coming weekend Sat or Sun!!! Rob you should have your wheels by then right?? Weather looks killer for a meet!! Spread the word!!! __________________ e60M5 with absolutely no mods Mr. Dealer...
	Appreciate 0 Quote

03-15-2010, 09:02 PM	#131
ISPEEDM3 Got Boost? 7 Rep 61 Posts Drives: M3 Turbo Join Date: Jan 2009 Location: el paso, tx iTrader: (0)	hey guys i meet up with a guy that has an active kit on his 335.. he is pushing about 450 ponies.. maybe he will meet up with us next time.
	Appreciate 0 Quote