Spyder After Market Headlights

flyrr100 · 11-22-2019, 04:13 AM

I have a pair of Spyder aftermarket headlights. They are to replace the factory lights that are faded and just need replacing.
I have a wiring question. The red and black wires sticking out are for the LED eyebrow lights and the LED Halo lights. They need to be hooked up to any (I presume) live and ground wires. Would it be ok if I hooked them up to the black and white wires going into the plug coming out of the light unit, or should I use another live source?

NoGuru · 11-22-2019, 10:47 AM

I would say any power and group that come on with the accessory's will work. the stock connection should have them.

11-22-2019, 04:13 AM	#1
flyrr100 Enlisted Member 3 Rep 40 Posts Drives: BMW 328i, F150 crew cab Join Date: Oct 2019 Location: Oviedo, FL iTrader: (0)	Spyder After Market Headlights I have a pair of Spyder aftermarket headlights. They are to replace the factory lights that are faded and just need replacing. I have a wiring question. The red and black wires sticking out are for the LED eyebrow lights and the LED Halo lights. They need to be hooked up to any (I presume) live and ground wires. Would it be ok if I hooked them up to the black and white wires going into the plug coming out of the light unit, or should I use another live source? Attached Images
	Appreciate 0 Tweet Quote

11-22-2019, 10:47 AM	#2
NoGuru Major 772 Rep 1,418 Posts Drives: 335is Join Date: Apr 2017 Location: MI iTrader: (0) Garage List 2021 Chevy Silverad ... [0.00] 2002 Jeep Cherokee [0.00] 2014 CTS [0.00] 2011 335is [0.00]	I would say any power and group that come on with the accessory's will work. the stock connection should have them. __________________ 2011 335is DCT BQ Tuning / BMS CAI / VRSF kittyless DP's / Synapse BOV and charge pipe / 7" VRSF Race FMIC / Walbro 535 and 450 on BMP4 / E90 tune / Diff Brace / PR Coils / Relocation Inlets / DAW Stage3+ Turbos / MMP port injection / xHP Stage 3 / FPR and -6 fuel lines
	Appreciate 0 Quote