[Shagg1e]

Guys, i have a 2011 320d which cut out at traffic lights and now wont start
and it is giving a code for low rail pressure at start

When you crank it it sounds like it is firing on one cylinder, chain is fine as it was replaced recently and it will fire and run on brake cleaner down the inlet

pump in tank is working as i have plugged it into ista and run the fuel system prime

I have checked for any swarfe in the high pressure rail and injector pipes and got nothing out

would a stuck open injector stop the pressure building in the rail to cause non start ?

Any input or ideas appreciated.