[GnomeChild]

Anyone have a tool that will work for this? Everywhere I look, I can’t find a source for anything that will work for the 50mm nut on the differential/driveshaft connection

AR no longer has it, Tusk no longer has it; Would rather not buy an expensive 50mm Snap-On Crowfoot, especially if I’ll have to grind it down

[GnomeChild]

Managed to find the AR-Designs tool at ECS

https://www.ecstuning.com/b-ar-desig...-01-04000~ard/

[ktish]

I have a 50mm fan nut wrench from KD Tools that I found on eBay for less than $10 at the time.

[GnomeChild]

I think I’ll go with the AR designs one; I plan on doing many more of these in the future

Thank you though; I appreciate it

[feuer]

I got this https://www.e90post.com/forums/showp...65&postcount=3

I made my own out of a random piece of angle iron lol

[TheeGovernor]

Originally Posted by GnomeChild

Anyone have a tool that will work for this? Everywhere I look, I can’t find a source for anything that will work for the 50mm nut on the differential/driveshaft connection

AR no longer has it, Tusk no longer has it; Would rather not buy an expensive 50mm Snap-On Crowfoot, especially if I’ll have to grind it down

You pay shipping both ways and you can rent mine.