Coding injectors help please!

patton001 · 01-15-2019, 05:55 PM

Hi all. I am new here but been lurking for a while. Good forum, lots of good info. Anyhow I have hit a little snag. I am going to replace my injectors this weekend because I have 3 leakers. The new ones are Index 12's.

The procedure looks pretty straight forward but I just thought I would look at the coding procedure today as a warm up for this weekend. I have a Schwaben to do the coding. I hooked it up today and drilled down to the screen with the values and instead of just seeing 6 digits to change like all of the videos have shown, under each Cylinder I had 2 matching 22 digit numbers. It looked like this:

Cylinder 1
94411625119547117501497
94411625119547117501497

Each cylinder was like this (different number of course). Has anyone run into this before? I have no idea what values to use now for the new injectors.

Any help would be appreciated.
Thanks

rediahad · 01-22-2019, 03:29 PM

I just did this a couple weeks ago with ntsc expert. Way easier, i dont remember running into any numbers like that just coded in the two sets of 3 digit numbers that came on each injecter

n2siast · 01-23-2019, 07:06 AM

If you have access to INPA, I'd suggest using that as it is quick and easy. Literally 2 minutes and you're done.

01-15-2019, 05:55 PM	#1
patton001 New Member 0 Rep 13 Posts Drives: 2009 BMW 335i Join Date: Oct 2017 Location: Huntington Beach, CA iTrader: (0)	Coding injectors help please! Hi all. I am new here but been lurking for a while. Good forum, lots of good info. Anyhow I have hit a little snag. I am going to replace my injectors this weekend because I have 3 leakers. The new ones are Index 12's. The procedure looks pretty straight forward but I just thought I would look at the coding procedure today as a warm up for this weekend. I have a Schwaben to do the coding. I hooked it up today and drilled down to the screen with the values and instead of just seeing 6 digits to change like all of the videos have shown, under each Cylinder I had 2 matching 22 digit numbers. It looked like this: Cylinder 1 94411625119547117501497 94411625119547117501497 Each cylinder was like this (different number of course). Has anyone run into this before? I have no idea what values to use now for the new injectors. Any help would be appreciated. Thanks
	Appreciate 0 Tweet Quote

01-22-2019, 03:29 PM	#2
rediahad Banned 17 Rep 115 Posts Drives: E71, E93, E92 Join Date: Apr 2018 Location: Sacramento iTrader: (1)	I just did this a couple weeks ago with ntsc expert. Way easier, i dont remember running into any numbers like that just coded in the two sets of 3 digit numbers that came on each injecter
	Appreciate 0 Quote

01-23-2019, 07:06 AM	#3
n2siast Lieutenant 76 Rep 405 Posts Drives: E93 335i M-SPORT Join Date: Aug 2013 Location: Richmond, VA iTrader: (9)	If you have access to INPA, I'd suggest using that as it is quick and easy. Literally 2 minutes and you're done.
	Appreciate 0 Quote