|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Search | Today's Posts | Mark Forums Read |
|
BMW 3-Series (E90 E92) Forum
>
after cic retrofit some problems
|
|
10-14-2024, 08:40 AM | #1 |
New Member
0
Rep 29
Posts |
after cic retrofit some problems
Hi, I have had a CIC installed for a few days now. I have adjusted the Vo/FA and added the following codes
$609 $6VA $697 Now a number of problems appear 1, I get a message on my dashboard (see photo 1) 2, when I read my car with ista, it still shows ccc ant & ccc/ask in red. How is this possible? 3,I used inpa to take a look and then I didn't see cic but CCC? (see photo 3) 4, I now also see that the tel/mulf + cid is not written to my vin. When I use ncs expert I also see no tel/mulf between my ecu list I'm wondering this so I thought I'd make a post on bimmerpost thanks in advance |
10-14-2024, 12:49 PM | #2 |
First Lieutenant
395
Rep 340
Posts
Drives: Green '07 & Arctic '08 335i's
Join Date: Jan 2023
Location: Monterey Peninsula
|
Need to change build date
There is more to coding a CIC than just those items you listed. I suggest you follow this guide, I used it to do two cars with 100% success.
|
Appreciate
0
|
10-14-2024, 01:01 PM | #3 | |
New Member
0
Rep 29
Posts |
Quote:
|
|
Appreciate
0
|
10-14-2024, 02:10 PM | #4 |
First Lieutenant
395
Rep 340
Posts
Drives: Green '07 & Arctic '08 335i's
Join Date: Jan 2023
Location: Monterey Peninsula
|
Again, if you follow the steps in that guide, specifically the second post in grey, it is everything you need to get it working. It is a lot of very complex steps that must be done in a very specific order for it to work. If you are not having success, perhaps it's time to throw in the towel and look into someone who can do the coding part remotely?
|
Appreciate
0
|
10-14-2024, 02:39 PM | #5 | |
New Member
0
Rep 29
Posts |
Quote:
i said that i did that 1, i edited the VO/Fa after that i write it in cas+frm(NFRM) 2, after that i press procec ecu (CIC) then click on SG_codieren 3, write the vin into the cic 4, then the navagation thing i already did that to + its worked |
|
Appreciate
0
|
Bookmarks |
Thread Tools | Search this Thread |
|
|