E90Post
 


The Tire Rack
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > N54 Turbo Engine / Drivetrain / Exhaust Modifications - 335i > 335is/550i/650i/ECS Tuning Clutch Review



Reply
 
Thread Tools Search this Thread
      04-24-2014, 06:42 PM   #1
Myrder
Major
Myrder's Avatar
United_States
162
Rep
1,264
Posts

Drives: 2010 E92 335i MSport 6MT LMB
Join Date: Apr 2013
Location: WildWest

iTrader: (1)

Talking 335is/550i/650i/ECS Tuning Clutch Review

Decided to give an update and some idea of what the 335is/550i/650i clutch swap entails and some description of it. I have right at 1,000 miles on it. I have started to beat on it. I also switch to Redline MT-90 while the trans was out.

Symptoms:
Stock clutch started slipping under 18psi on cold nights in 4th gear.


Experience:
This was my 1st BMW clutch swap. I’ve done some a few 3rd and 4th gen F-bodies. Also, engine swaps and blah blah…

Install:
Typical clutch swap, nothing out of the ordinary except how small the flywheel and clutch are. My flywheel had 45,000 miles on it and looked great, I cleaned it off and it still had the machine ridges and lines throughout with no burns, so I reused. My main complaints would be the top bolts that you access in the engine bay for the top of the bell housing AND the top passenger side bolt you get from under the car.

I made my own clutch alignment tool. Out of some scrap tubing and electrical tape to get it snug inside and out. Overall very ghetto but worked.

I also used a small triangle block of wood with a giant clamp to hold it to engine block in the flywheel teeth to keep it from spinning when torqueing the pressure plate.

Make sure you mark all the random bolts and put them in bags and life will be fine.

The locking ring on the pressure plate can be removed with a special tool, or I you are impatient and tired of spending money, use a hammer and a long screwdriver to knock it loose. I tied a thin wire around it and part of the car so it didn’t fly and hit anything.

Remember to have some long extensions (3ft worth) and universal joints in all sizes on hand. Definitely need a friend to help and keep sanity. ALSO get that 3/8 drive with the bendable head as that is 100% needed when doing top bell housing bolts, that and maybe a small like 12-9mm sized wrenchs (3in long) to get in there and move faster.

Finally grease up all the shift linkage before you put it all back together, my shifter is nice and smooth.

Engagement:
Clutch engagement was low after initial install but has move up since driving. I would say full release is slightly lower than OEM and pedal pressure is about 10-15% stiffer. Not at all a pain to drive and actually refreshing. Feel is very much OEM.

Reasoning for 335is/550i/650i/ECS tuning clutch:
I searched how many threads have popped up with 550i or 335is clutch slip events related to power and couldn’t find any. I believe this clutch is good for well into 500rwtq range. Considering the 550i is 450tq and has an easy 800lbs on my car. Dinan doesn't offer a clutch upgrade for their different stages of 550i's so they feel it’s adequate. I didn’t want to spend +$600 on a clutch. This was $380, so savings is significant. I also do not plan on doing a single turbo and plan on being done at FBO levels.

Fluid: I really like the fluid made a huge difference on the 1-2 shift. I need to perform the CDV next, but decided not to during swap so I could appreciate the difference.

F10 550i
Power: 400 bhp @ 5500 rpm
Torque: 450 lb-ft @ 1750 rpm
Curb weight: 4417 lb (auto); 4358 lb (manual)

My Car
Power: est 400rwhp
Torque: +430rwtq
Curb Weight: 3510lb (weighed)
Time: 12.7@115mph


Album of Images (sorry wish I took more, but it all looks the same.)
View post on imgur.com


edit: Watch the HPF clutch video for more suggestions as well.
__________________
2010|335i|LMB|E92|6MT|MSport|Logic7|335is Clutch|AE Performance|BMS|Walbro|VRSF 7"| 149.7mph NFZ AZ 1/2mi
1992|Pontiac Firebird|Mild 355ci|T56|
-I will look on your treasures, gypsy. Is this understood?-
Appreciate 1
      04-24-2014, 08:12 PM   #2
sparkyblue
Captain
sparkyblue's Avatar
United_States
64
Rep
760
Posts

Drives: E82 135i & F80 M3
Join Date: Jan 2011
Location: USA

iTrader: (8)

Garage List
2008 BMW 135i  [0.00]
It's great that we have an OEM BMW upgrade option. I appreciate you documenting and creating the write-up.

My clutch slips when running the Cobb E-30 (E85 Mix) map. So I had to dial back down to Stage 2+ Aggressive until I had the funds and time for a clutch swap.
Appreciate 0
      04-24-2014, 08:55 PM   #3
nikitino25
Captain
nikitino25's Avatar
United_States
90
Rep
817
Posts

Drives: '07 E92 335i
Join Date: Dec 2011
Location: Missouri

iTrader: (2)

I'm in the process of doing this same upgrade and got a new stock dual mass flywheel just to be on the safe side but my pressure plate has a defect in it, see here:
http://www.e90post.com/forums/showthread.php?t=976721

I will probably return it just to be sure it doesn't cause any problems. Also, what's this fluid you're talking about?
Appreciate 0
      04-24-2014, 09:39 PM   #4
Myrder
Major
Myrder's Avatar
United_States
162
Rep
1,264
Posts

Drives: 2010 E92 335i MSport 6MT LMB
Join Date: Apr 2013
Location: WildWest

iTrader: (1)

Quote:
Originally Posted by nikitino25 View Post
I'm in the process of doing this same upgrade and got a new stock dual mass flywheel just to be on the safe side but my pressure plate has a defect in it, see here:
http://www.e90post.com/forums/showthread.php?t=976721

I will probably return it just to be sure it doesn't cause any problems. Also, what's this fluid you're talking about?
MT-90 redline manual transmission fluid 75w90. Not needed to do swap but a nice change if your 1-2 gear is notchy.

edit: random question, is the imgur album working for you guys?
__________________
2010|335i|LMB|E92|6MT|MSport|Logic7|335is Clutch|AE Performance|BMS|Walbro|VRSF 7"| 149.7mph NFZ AZ 1/2mi
1992|Pontiac Firebird|Mild 355ci|T56|
-I will look on your treasures, gypsy. Is this understood?-
Appreciate 0
      04-25-2014, 12:46 AM   #5
nikitino25
Captain
nikitino25's Avatar
United_States
90
Rep
817
Posts

Drives: '07 E92 335i
Join Date: Dec 2011
Location: Missouri

iTrader: (2)

Quote:
Originally Posted by Myrder View Post
MT-90 redline manual transmission fluid 75w90. Not needed to do swap but a nice change if your 1-2 gear is notchy.

edit: random question, is the imgur album working for you guys?
Yep, the photo album works and I just recently put Redline MTL in my trans and noticed the difference right away, much smoother....
Appreciate 0
      04-25-2014, 06:32 AM   #6
blisstik
Lieutenant Colonel
blisstik's Avatar
No_Country
151
Rep
1,677
Posts

Drives: E92
Join Date: Jul 2009
Location: California

iTrader: (14)

My first mod was the CDV.

Redline works great! I've got HPF stage 2 with stock flywheel.
Appreciate 0
      04-25-2014, 11:29 AM   #7
Myrder
Major
Myrder's Avatar
United_States
162
Rep
1,264
Posts

Drives: 2010 E92 335i MSport 6MT LMB
Join Date: Apr 2013
Location: WildWest

iTrader: (1)

Quote:
Originally Posted by blisstik View Post
My first mod was the CDV.

Redline works great! I've got HPF stage 2 with stock flywheel.
Nice. I'm excited to get that done soon.
__________________
2010|335i|LMB|E92|6MT|MSport|Logic7|335is Clutch|AE Performance|BMS|Walbro|VRSF 7"| 149.7mph NFZ AZ 1/2mi
1992|Pontiac Firebird|Mild 355ci|T56|
-I will look on your treasures, gypsy. Is this understood?-
Appreciate 0
      04-25-2014, 12:28 PM   #8
BMOEW
Lieutenant Colonel
BMOEW's Avatar
Lebanon
121
Rep
1,665
Posts

Drives: 2011 335is AW
Join Date: Apr 2009
Location: dallas, tx: Lebanon

iTrader: (6)

So this is for the IS DCT?
__________________
2011 335IS Alpine White|Coral Red|DCT|BuraQ E60 Tune|DCI|VRSF 3" DownPipes| ER ChargePipe w/ HKS SSQV BOV|VRSF 7" FMIC|RB PCV| BMS Oil Catch Can|NGK 5992|AQUAMIST HFS-4 w/Twin Methanol Tank|Custom Exhaust| ST Coilovers| and a METAL FOOT
Appreciate 0
      04-25-2014, 12:30 PM   #9
Myrder
Major
Myrder's Avatar
United_States
162
Rep
1,264
Posts

Drives: 2010 E92 335i MSport 6MT LMB
Join Date: Apr 2013
Location: WildWest

iTrader: (1)

Quote:
Originally Posted by BMOEW View Post
So this is for the IS DCT?
No sir, 6-speed manual transmission.
__________________
2010|335i|LMB|E92|6MT|MSport|Logic7|335is Clutch|AE Performance|BMS|Walbro|VRSF 7"| 149.7mph NFZ AZ 1/2mi
1992|Pontiac Firebird|Mild 355ci|T56|
-I will look on your treasures, gypsy. Is this understood?-
Appreciate 0
      04-26-2014, 11:46 AM   #10
Chrisred
Captain
Chrisred's Avatar
Canada
62
Rep
788
Posts

Drives: BMW 335xi coupe
Join Date: Jan 2010
Location: Montreal, Canada

iTrader: (0)

I believe our cars require redline ATF (auto trans fluid). So technically the MT90 isn't compatible. I'm currently using Redline D4 ATF
__________________
JB4 Trebila tuned cp-e IC AMS exhaust BMS DCI AR DP's METH RB TURBO
19" VMR VB3 Stoptech BBK TC KLINE VORSHLAG SPEC STG 3 OSS design
Appreciate 0
      04-26-2014, 12:42 PM   #11
Myrder
Major
Myrder's Avatar
United_States
162
Rep
1,264
Posts

Drives: 2010 E92 335i MSport 6MT LMB
Join Date: Apr 2013
Location: WildWest

iTrader: (1)

Quote:
Originally Posted by Chrisred View Post
I believe our cars require redline ATF (auto trans fluid). So technically the MT90 isn't compatible. I'm currently using Redline D4 ATF
There is an in-depth discussion on another very popular n54 forum discussing it's uses. Enough people have run it long enough for me to believe its useful.
__________________
2010|335i|LMB|E92|6MT|MSport|Logic7|335is Clutch|AE Performance|BMS|Walbro|VRSF 7"| 149.7mph NFZ AZ 1/2mi
1992|Pontiac Firebird|Mild 355ci|T56|
-I will look on your treasures, gypsy. Is this understood?-
Appreciate 0
      06-03-2014, 09:32 PM   #12
snaimpally
Major
United_States
136
Rep
1,192
Posts

Drives: 2011 335i MT
Join Date: Mar 2014
Location: Austin, TX

iTrader: (9)

Garage List
2011 BMW 335i  [0.00]
Quote:
Originally Posted by Myrder View Post
MT-90 redline manual transmission fluid 75w90. Not needed to do swap but a nice change if your 1-2 gear is notchy.

edit: random question, is the imgur album working for you guys?
MT90 75w90 is good stuff. Had it in my Speed 3. Plan to put it in my 335i.

Thanks for the review. Great to have a beefier OEM solution.

Last edited by snaimpally; 06-03-2014 at 09:38 PM..
Appreciate 0
      06-04-2014, 11:39 AM   #13
Myrder
Major
Myrder's Avatar
United_States
162
Rep
1,264
Posts

Drives: 2010 E92 335i MSport 6MT LMB
Join Date: Apr 2013
Location: WildWest

iTrader: (1)

Quote:
Originally Posted by snaimpally View Post
MT90 75w90 is good stuff. Had it in my Speed 3. Plan to put it in my 335i.

Thanks for the review. Great to have a beefier OEM solution.
No problem, I now have 2200 miles on the clutch and it holds great, have definitely hit power levels even in this heat, that the old clutch would not hold. When i removed the 335i clutch it had lots and lots of life left in it, so the pressure plate was the weak spot.

No slipping on the new one and chipping 3rd gear is something I don't think the old one did very often... at this point I want do get the CDV delete done. Been lazy.
__________________
2010|335i|LMB|E92|6MT|MSport|Logic7|335is Clutch|AE Performance|BMS|Walbro|VRSF 7"| 149.7mph NFZ AZ 1/2mi
1992|Pontiac Firebird|Mild 355ci|T56|
-I will look on your treasures, gypsy. Is this understood?-
Appreciate 0
      06-04-2014, 10:56 PM   #14
snaimpally
Major
United_States
136
Rep
1,192
Posts

Drives: 2011 335i MT
Join Date: Mar 2014
Location: Austin, TX

iTrader: (9)

Garage List
2011 BMW 335i  [0.00]
Quote:
Originally Posted by Myrder View Post
No problem, I now have 2200 miles on the clutch and it holds great, have definitely hit power levels even in this heat, that the old clutch would not hold. When i removed the 335i clutch it had lots and lots of life left in it, so the pressure plate was the weak spot.

No slipping on the new one and chipping 3rd gear is something I don't think the old one did very often... at this point I want do get the CDV delete done. Been lazy.
Clutch valve delete is nice. I have the UUC shifter + DSSR + Bimmian weighted shift knob + CDV delete. Pretty happy now with the manual transmission.
Appreciate 0
      06-05-2014, 07:50 AM   #15
cleex024
Lieutenant Colonel
104
Rep
1,529
Posts

Drives: 2008 BMW 335i Coupe
Join Date: Mar 2011
Location: Woodbridge

iTrader: (2)

Wonder how it would hold up with rb turbos
__________________
Space Gray l 6MT l OSG LSD w/ VAC Race Diff Cover l Cobb e30 l Morr vs8.2 l UUC SSK w/ DSSR l VSRF Catless Dps l RPI Intercooler l CDV Removed l HID AE 8000k l ETS Catback l AST 5200 w/ Vorshlag Camber Plates l ER Dual Oil Coolers l Rear Camber and Toe Arms l K&N Drop In l Solid Tranny/Diff/Subframe Bushings l Bridgestone RE-11
Appreciate 0
      06-05-2014, 08:10 AM   #16
Atekk
New Member
Atekk's Avatar
Germany
0
Rep
18
Posts

Drives: BMW 335i e93
Join Date: Aug 2010
Location: Hamburg, Germany

iTrader: (0)

Quote:
Originally Posted by cleex024
Wonder how it would hold up with rb turbos
...and E85?
Appreciate 0
      06-05-2014, 10:15 AM   #17
2jzn54
Captain
41
Rep
823
Posts

Drives: 07 E90 335i 6MT
Join Date: Jul 2011
Location: United States

iTrader: (6)

curious why the ECS site only mentions i models as an application? I'm sure its compatible with the xi lol.
Appreciate 0
      06-05-2014, 12:28 PM   #18
2jzn54
Captain
41
Rep
823
Posts

Drives: 07 E90 335i 6MT
Join Date: Jul 2011
Location: United States

iTrader: (6)

anyone know about xi compatibility? i know many people run aftermarket clutches made for the i on the xi.
Appreciate 0
      06-05-2014, 01:05 PM   #19
mike@x-ph.com
BimmerPost Supporting Vendor
mike@x-ph.com's Avatar
United_States
23798
Rep
190,172
Posts


Drives: 07-335/12-328/18-M4/21-M4CP
Join Date: Sep 2013
Location: Las Vegas

iTrader: (23)

Nice review
__________________
Check out our current sale by clicking on this link!
https://x-ph.com/sale/

Phone number 702-494-9435
Appreciate 0
      06-05-2014, 03:38 PM   #20
e90Mark
Captain
e90Mark's Avatar
Philippines
31
Rep
722
Posts

Drives: 2008 BMW 335xi
Join Date: Aug 2013
Location: Detroit

iTrader: (5)

Garage List
2008 BMW 335xi  [10.00]
Quote:
Originally Posted by Daily Three View Post
anyone know about xi compatibility? i know many people run aftermarket clutches made for the i on the xi.
Wondering this as well.
Spec for example doesn't differentiate their clutches for i/xi.
Appreciate 0
      06-05-2014, 03:45 PM   #21
2jzn54
Captain
41
Rep
823
Posts

Drives: 07 E90 335i 6MT
Join Date: Jul 2011
Location: United States

iTrader: (6)

Quote:
Originally Posted by e90Mark View Post
Wondering this as well.
Spec for example doesn't differentiate their clutches for i/xi.
my issue is i've never seen the 335is clutch in person.. so while the 335i and xi clutches are the same.. i don't know if the pressure plate itself is larger? possibly will not fit with the xi.. OP can you post a pic of the components if you have em?
Appreciate 0
      06-05-2014, 05:27 PM   #22
Jeff@TopGearSolutions
Jeff@TopGearSolutions's Avatar
United_States
3441
Rep
79,212
Posts

Drives: C6 Z06, 09 335i, 10 335xi
Join Date: Dec 2008
Location: www.TopGearSolutions.com

iTrader: (37)

Quote:
Originally Posted by e90Mark View Post
Wondering this as well.
Spec for example doesn't differentiate their clutches for i/xi.
The Spec RWD clutches also fit the Xi.
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 10:15 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST