|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Oh God I damaged my wheel with metal brush and some rough sandpaper....damn!
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
08-16-2018, 01:54 PM | #1 |
Private
14
Rep 84
Posts |
Oh God I damaged my wheel with metal brush and some rough sandpaper....damn!
so basically, wheels bmw 230 style, I wanted some cheap fix for my curbed alloys, and front turned out nice as I only brushed it with some fine sandpaper, and even tho there are marks on the edges, it is still ok, considering I used only black spray paint.
but back I decided to be little more aggressive with those sctarched edges, so i brushed it with some metal brush and there are hair deep scratches from it and it's all over the place. I also made some bumps and tears on this wheel as I tried to put thick coat so it will level all the scratches, but it turned out real bad.... any tip on how to fix it? I might make a pic tomorrow so you can have an idea what it looks like... |
08-20-2018, 08:17 AM | #3 |
New Member
5
Rep 22
Posts |
Try sanding it down smooth then shape some bondo to it. Let it dry, sand it again smooth. Tape off whatever needs to be and spray paint the wheels again. Spray about 3-4 coats, letting each coat dry in between. Apply 2-3 coats of clear doing the same method.
|
Appreciate
1
Psyphertext7.00 |
08-20-2018, 10:09 PM | #4 | |
Private
7
Rep 76
Posts |
Quote:
__________________
if you didn't have fun, it wasn't difficult enough.
|
|
Appreciate
0
|
Bookmarks |
|
|