E90 330D

MrSweet1991 · 05-27-2019, 08:26 AM

Hi All,

Took the MAF out and gave it a good spray with Halfrauds Electrical Cleaner and left to dry for over 24 hours, got ISTA+ installed (Thanks J0K3R5 but noticed idle and load values had values of 0?

It states the leave the car off for 3 minutes so will go back out and have a test but what causes that? I've read vacuum leaks can cause 0 values but wanted to check if theres anything else.

DG330 · 10-12-2019, 05:20 PM

Quote:

Originally Posted by MrSweet1991

Hi All,

Took the MAF out and gave it a good spray with Halfrauds Electrical Cleaner and left to dry for over 24 hours, got ISTA+ installed (Thanks J0K3R5 but noticed idle and load values had values of 0?

It states the leave the car off for 3 minutes so will go back out and have a test but what causes that? I've read vacuum leaks can cause 0 values but wanted to check if theres anything else.

Did this resolve?

Also, what cable are you using for Ista+ I have a Kline blue one for inpa, but ordered a Kdcan switch. Just need to get the software.

MrSweet1991 · 10-13-2019, 08:58 AM

Quote:

Originally Posted by Txs330D

Did this resolve?

Also, what cable are you using for Ista+ I have a Kline blue one for inpa, but ordered a Kdcan switch. Just need to get the software.

Hi mate,

No I never looked into it again, I use a K+Dcan adapter which is a blue cable. I purchased it with ISTA for £20 off eBay but the chap isn't about anymore. ISTA cna be got for free from J0kers (go on his profile then search for his created threads) and I can send you Carly unlocked for Android if you need it

DG330 · 10-13-2019, 03:15 PM

Quote:

Originally Posted by MrSweet1991

Quote:

Originally Posted by Txs330D

Did this resolve?

Also, what cable are you using for Ista+ I have a Kline blue one for inpa, but ordered a Kdcan switch. Just need to get the software.

Hi mate,

No I never looked into it again, I use a K+Dcan adapter which is a blue cable. I purchased it with ISTA for £20 off eBay but the chap isn't about anymore. ISTA cna be got for free from J0kers (go on his profile then search for his created threads) and I can send you Carly unlocked for Android if you need it

Cheers mate, will do.

Need to get onto the more modern software for sure

DG330 · 10-13-2019, 03:17 PM

That would have been good! But I've got a iPhone 😬 would have been useful for live logging.

05-27-2019, 08:26 AM	#1
MrSweet1991 Captain 129 Rep 828 Posts Drives: BMW E90 330D M Sport Join Date: Apr 2017 Location: West Midlands iTrader: (0)	E90 330D - MAF Values 0 in ISTA+? Hi All, Took the MAF out and gave it a good spray with Halfrauds Electrical Cleaner and left to dry for over 24 hours, got ISTA+ installed (Thanks J0K3R5 but noticed idle and load values had values of 0? It states the leave the car off for 3 minutes so will go back out and have a test but what causes that? I've read vacuum leaks can cause 0 values but wanted to check if theres anything else.
	Appreciate 0 Tweet Quote

10-13-2019, 03:17 PM	#5
DG330 First Lieutenant 70 Rep 360 Posts Drives: 330 Join Date: Nov 2018 Location: Uk iTrader: (0)	That would have been good! But I've got a iPhone 😬 would have been useful for live logging.
	Appreciate 0 Quote