Ccid 354 24 35

FrankyGTR · 05-02-2015, 05:17 PM

its been 2 times now in my 08 e92 i have been getting these 3 codes at the same time.
it disables traction control and tpms

once i park the car stop and restart then drive.the 3 codes go away .its weird

anybody ever experience this?

FrankyGTR · 05-04-2015, 08:00 AM

Nobody ?
Happened again
Very anoying as my CC is not working

simon · 05-04-2015, 08:24 AM

Steering angle sensor. Take it out and clean the encoder disc and light tunnel (whatever it's called). Put it back, turn from lock to lock to recalibrate and problem solved.

Simon

FrankyGTR · 05-06-2015, 05:12 PM

Quote:

Originally Posted by simon

Steering angle sensor. Take it out and clean the encoder disc and light tunnel (whatever it's called). Put it back, turn from lock to lock to recalibrate and problem solved.

Simon

Thanks for the reply
where is this sensor exactly?

simon · 05-07-2015, 08:24 AM

It's in the "SZL" module, as bmw calls it. Check out this thread:

http://www.e90post.com/forums/showthread.php?t=520467

I wouldn't suggest reflowing any solder joints, or taking the board out, since there are some ribbon cables on the back that are a PITA to get back in. Just clean the encoder disc and that plastic light tunnel deal and reassemble.

Simon

intensee92 · 07-15-2015, 11:23 AM

If you're CC isn't working, I've read that it could be your wheel speed sensor/wheel bearing in your left rear wheel.

Lshaw · 11-05-2015, 11:30 AM

Bump. Just threw these codes today.
Crushed a massive pothole few days ago, tire blew out. Everything else seems fine.

My best guess is alignment?

05-02-2015, 05:17 PM	#1
FrankyGTR Second Lieutenant 18 Rep 195 Posts Drives: N54 335i 6MT-R32GTR Join Date: May 2013 Location: Montreal iTrader: (0)	Ccid 354 24 35 its been 2 times now in my 08 e92 i have been getting these 3 codes at the same time. it disables traction control and tpms once i park the car stop and restart then drive.the 3 codes go away .its weird anybody ever experience this? __________________ 2008 335i coupe 6MT BOOST FIEND
	Appreciate 0 Tweet Quote

05-04-2015, 08:00 AM	#2
FrankyGTR Second Lieutenant 18 Rep 195 Posts Drives: N54 335i 6MT-R32GTR Join Date: May 2013 Location: Montreal iTrader: (0)	Nobody ? Happened again Very anoying as my CC is not working
	Appreciate 0 Quote

05-04-2015, 08:24 AM	#3
simon Second Lieutenant 65 Rep 222 Posts Drives: E92 Montego Blue 328i Join Date: Mar 2005 Location: Atlanta, GA iTrader: (1)	Steering angle sensor. Take it out and clean the encoder disc and light tunnel (whatever it's called). Put it back, turn from lock to lock to recalibrate and problem solved. Simon
	Appreciate 0 Quote

05-07-2015, 08:24 AM	#5
simon Second Lieutenant 65 Rep 222 Posts Drives: E92 Montego Blue 328i Join Date: Mar 2005 Location: Atlanta, GA iTrader: (1)	It's in the "SZL" module, as bmw calls it. Check out this thread: http://www.e90post.com/forums/showthread.php?t=520467 I wouldn't suggest reflowing any solder joints, or taking the board out, since there are some ribbon cables on the back that are a PITA to get back in. Just clean the encoder disc and that plastic light tunnel deal and reassemble. Simon
	Appreciate 0 Quote

07-15-2015, 11:23 AM	#6
intensee92 Colonel 55 Rep 2,468 Posts Drives: Your Girl Crazy. Join Date: Oct 2010 Location: Charlotte iTrader: (12)	If you're CC isn't working, I've read that it could be your wheel speed sensor/wheel bearing in your left rear wheel.
	Appreciate 0 Quote

11-05-2015, 11:30 AM	#7
Lshaw Lieutenant Colonel 251 Rep 1,869 Posts Drives: 09 335i 6mt Join Date: Oct 2007 Location: NYC/Pittsburgh iTrader: (21)	Bump. Just threw these codes today. Crushed a massive pothole few days ago, tire blew out. Everything else seems fine. My best guess is alignment? __________________ 07 335xi (2007-2010) 08 Legacy Spec B (08-) 09 335i (2010-) 15 X5 xdrive 35i (2015-) 17 Forester XT (2016-)
	Appreciate 0 Quote