[zooy0rkx]

Hey was wondering if anyone had a picture of their fuse box for a xi behind the glove box? ive been battling some electrical gremlins but never thought to look in fuse box because car ran and drove fine (i know my mistake) but i was wondering if anyone had a picture so i could reference it to this one. Yes i did find one online but i just want to be sure im doing the right thing

[ctuna]

See the first link in this
Fuse box changes two or three times during the life of the e9x

There is a recall on the power connectors to that fuse box in some years.

[gbalthrop]

Attached are two ScreenPrints from Bentley, showing Fuse Chart for 2008 & Later E9x Models.
That is ANY E9x with build date AFTER 9/1/2007.

OP, the fuse ID you posted is CORRECT for 2008+ E9x Models. If you will identify the "Gremlins",
perhaps we can help -- IF NOT as appearing below.
George

[zooy0rkx]

Thanks guys for everything, you guys always come in clutch!

So guys the one picture i sent was the picture of my glove box fuse box, when cross referencing the fuse diagram some stuff just isnt the same? Could i just put fuses in place of where the ones i think im missing?
Biggest problem im having right now is the tire pressure monitor has no communication to the kcan so it doesnt work. Also whenever im in ista, it brings up a slew of faults but most everything checks out except for 2 things. the rdc (tire pressure monitor) and the smfa (driver seat module?) i tested the drivers seat and it all worked out but the tire pressure monitor still has nothing. tire pressure monitor was replaced before i bought the car and the fuse checks out ok.

[zooy0rkx]

Oh and also i keep getting a no communication with the coolant pump when i plug in a code reader but i dont know how to bring that up in ista