**Riss Racing** 3" Catted Downpipes (Available Now!)

Adam@Riss Racing · 08-10-2008, 04:24 AM

UPDATE: Please contact James@Rissracing for ordering information!

Hello everyone,

The long awaited Riss Racing 3" CATTED downpipes are available now!!! Here are the pictures of our Polished and Ceramic Coated! Everybody on the pre-order list should have gotten their FEDEX/USPS confirmation today. If not, please email me at Adam@rissracing.com.

1. POWER? Catted downpipes will still create tons of power. Our cats are located near the bottom of the downpipes. They have custom Metal Substrate Catalytic converters which flow from 3" to 2.5" smoothly. The reason for this is to continue to build boost up top with 3 inches of flow and putting the cats in before the sensors so we don't have a CEL. We have our sets going out to a few of our clients that will test the power for us on independent dynos.

2. DYNO? See above.

3. AVAILABILITY? TODAY.

4. 135i? Yes, it fits the 135i!

They are available for purchase right now. Please contact Anthony (Riss Racing) for more ordering information. Thank you guys!

Polished
http://rissracing.com/catteddp.html

Ceramic Coated
http://rissracing.com/catteddpb.html

NEW UPDATE:
Videos and new pictures below!!!

Revving:
[u2b]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/_fN2Uj2bqpw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/_fN2Uj2bqpw&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>[/u2b]

Fly By:
[u2b]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/A_agkeQgPJg&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/A_agkeQgPJg&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>[/u2b]

AllydNYC · 08-10-2008, 05:02 AM

Very nice.

Adam@Riss Racing · 08-10-2008, 05:14 AM

Quote:

Originally Posted by AllydNYC

Very nice.

Thank you!

Adam@Riss Racing · 08-11-2008, 01:21 AM

2 coated sets to be shipped tomorrow! Hopefully have some independent dynos and smog check this week.

Riss Racing · 08-11-2008, 03:48 PM

Orders shipped! Thanks guys!

Nate@IND · 08-11-2008, 09:46 PM

Nice downpipes guys. We can't wait to try a set out on our new 135i project car

tooshay · 08-12-2008, 12:48 AM

so which downpipes goes better with a high flow cat exhaust system? i don't want to be harrass by the cops or fail a smog check when it is time for a smog check. so i am thinking the catted downpipes would be better for me. any info would be greatly appreciated. thanx

Adam@Riss Racing · 08-12-2008, 03:06 AM

Quote:

Originally Posted by tooshay

so which downpipes goes better with a high flow cat exhaust system? i don't want to be harrass by the cops or fail a smog check when it is time for a smog check. so i am thinking the catted downpipes would be better for me. any info would be greatly appreciated. thanx

Catted with your system would be the safest way. Sound would be great and you'll still net another 20+whp.

Riss Racing · 08-12-2008, 07:37 PM

Quite a few more orders went out today. Thanks guys!

Adam@Riss Racing · 08-14-2008, 08:12 PM

Quote:

Originally Posted by Nate@IND

Nice downpipes guys. We can't wait to try a set out on our new 135i project car

Absolutely Nate!

Riss Racing · 08-16-2008, 07:19 PM

Coated Catted back in stock! Thanks!

BLAZED · 08-21-2008, 01:20 AM

everything looks and sounds awesome! I can't wait until my catless dp's arrive

Adam@Riss Racing · 08-22-2008, 02:03 AM

Quote:

Originally Posted by BLAZED

everything looks and sounds awesome! I can't wait until my catless dp's arrive

On the way with your Mid pipes. Please post videos for us. We'd love to hear them!

JO3 · 08-22-2008, 03:18 AM

Quote:

Originally Posted by Adam@Riss Racing

2 coated sets to be shipped tomorrow! Hopefully have some independent dynos and smog check this week.

Any updates on the dyno and smog check?

brbheels · 08-26-2008, 01:17 PM

Adam- any results to post? I'd like to buy a set, but I really want to see some results first!!

Adam@Riss Racing · 08-26-2008, 11:30 PM

Quote:

Originally Posted by brbheels

Adam- any results to post? I'd like to buy a set, but I really want to see some results first!!

Have them installed on a few cars already. Nobody's yet to dyno. Everybody says they can feel a big difference, in power/sound. If we can't get a customer dyno, we'll get one taken care of for you guys! Also, we will do a smog check as well!

Riss Racing · 09-03-2008, 08:07 AM

Guys who requested bung bolts they are on the way!

If you did not get yours email Adam@rissracing.com. Thanks!

Nate@IND · 09-07-2008, 10:13 PM

We have these in stock and ready to ship

GhOsT_E90 · 09-09-2008, 03:05 PM

Adam I sent you many PMs about my order and missing O2 sim. Please PM me back

Riss Racing · 09-09-2008, 04:40 PM

Quote:

Originally Posted by GhOsT_E90

Adam I sent you many PMs about my order and missing O2 sim. Please PM me back

PM sent

Riss Racing · 09-12-2008, 08:18 AM

Have a few left in stock! Thanks guys!

Adam@Riss Racing · 09-17-2008, 02:54 PM

Grab some of the last batch guys! Re-ups will be in a couple weeks! Only a few left!

08-10-2008, 04:24 AM	#1
Adam@Riss Racing Banned 79 Rep 1,310 Posts Drives: 2006 Interlagos Blue BMW M5 Join Date: Jul 2007 Location: Irvine, CA iTrader: (1) Garage List 2006 BMW M5 [0.00] 2004 Mercedes SL55 [0.00] 2005 Mercedes E55 ( ... [0.00] 2004 BMW M3 (sold) [0.00]	Riss Racing 3" Catted Downpipes (Available Now!) UPDATE: Please contact James@Rissracing for ordering information! Hello everyone, The long awaited Riss Racing 3" CATTED downpipes are available now!!! Here are the pictures of our Polished and Ceramic Coated! Everybody on the pre-order list should have gotten their FEDEX/USPS confirmation today. If not, please email me at Adam@rissracing.com. 1. POWER? Catted downpipes will still create tons of power. Our cats are located near the bottom of the downpipes. They have custom Metal Substrate Catalytic converters which flow from 3" to 2.5" smoothly. The reason for this is to continue to build boost up top with 3 inches of flow and putting the cats in before the sensors so we don't have a CEL. We have our sets going out to a few of our clients that will test the power for us on independent dynos. 2. DYNO? See above. 3. AVAILABILITY? TODAY. 4. 135i? Yes, it fits the 135i! They are available for purchase right now. Please contact Anthony (Riss Racing) for more ordering information. Thank you guys! Polished http://rissracing.com/catteddp.html Ceramic Coated http://rissracing.com/catteddpb.html NEW UPDATE: Videos and new pictures below!!! Revving: [u2b]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/_fN2Uj2bqpw&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/_fN2Uj2bqpw&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>[/u2b] Fly By: [u2b]<object width="425" height="344"><param name="movie" value="http://www.youtube.com/v/A_agkeQgPJg&hl=en&fs=1"></param><param name="allowFullScreen" value="true"></param><embed src="http://www.youtube.com/v/A_agkeQgPJg&hl=en&fs=1" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344"></embed></object>[/u2b] Attached Images Last edited by Adam@Riss Racing; 04-22-2009 at 01:23 PM..
	Appreciate 0 Tweet

08-10-2008, 05:02 AM	#2
AllydNYC Loading... 342 Rep 2,187 Posts Drives: 91' E30 318is Join Date: Apr 2008 Location: Location iTrader: (15) Garage List 1991 BMW 318is [0.00]	Very nice.
	Appreciate 0

08-11-2008, 01:21 AM	#4
Adam@Riss Racing Banned 79 Rep 1,310 Posts Drives: 2006 Interlagos Blue BMW M5 Join Date: Jul 2007 Location: Irvine, CA iTrader: (1) Garage List 2006 BMW M5 [0.00] 2004 Mercedes SL55 [0.00] 2005 Mercedes E55 ( ... [0.00] 2004 BMW M3 (sold) [0.00]	2 coated sets to be shipped tomorrow! Hopefully have some independent dynos and smog check this week.
	Appreciate 0

08-11-2008, 03:48 PM	#5
Riss Racing Banned 276 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	Orders shipped! Thanks guys!
	Appreciate 0

08-11-2008, 09:46 PM	#6
Nate@IND BimmerPost Supporting Vendor 2868 Rep 11,374 Posts Drives: BMW Join Date: Oct 2006 Location: Chicago iTrader: (19)	Nice downpipes guys. We can't wait to try a set out on our new 135i project car __________________ IND DISTRIBUTION \| 866-963-4520 • FACEBOOK • INSTAGRAM • FLICKR
	Appreciate 0

08-12-2008, 12:48 AM	#7
tooshay Captain 313 Rep 755 Posts Drives: G20+M3 badge Join Date: Dec 2007 Location: Temecula iTrader: (6)	so which downpipes goes better with a high flow cat exhaust system? i don't want to be harrass by the cops or fail a smog check when it is time for a smog check. so i am thinking the catted downpipes would be better for me. any info would be greatly appreciated. thanx
	Appreciate 0

08-12-2008, 07:37 PM	#9
Riss Racing Banned 276 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	Quite a few more orders went out today. Thanks guys!
	Appreciate 0

08-16-2008, 07:19 PM	#11
Riss Racing Banned 276 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	Coated Catted back in stock! Thanks!
	Appreciate 0

08-21-2008, 01:20 AM	#12
BLAZED Conscious heads stay lifted... 49 Rep 518 Posts Drives: 2015 M4 6spd Join Date: Aug 2007 Location: Reno, NV iTrader: (4) Garage List 94 Toyota TRD Wideb ... [0.00] 2006 Dodge Viper SR ... [0.00] 1994 Toyota Supra t ... [0.00] 2008 BMW 335i E92 [0.00] 2006 Mitsubishi Evo ... [5.50]	everything looks and sounds awesome! I can't wait until my catless dp's arrive __________________ 2015 BMW M4 6spd 1997 Toyota Supra Turbo 6spd
	Appreciate 0

08-26-2008, 01:17 PM	#15
brbheels Second Lieutenant 12 Rep 207 Posts Drives: M440I Join Date: Dec 2006 Location: CLT iTrader: (10)	Adam- any results to post? I'd like to buy a set, but I really want to see some results first!!
	Appreciate 0

09-03-2008, 08:07 AM	#17
Riss Racing Banned 276 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	Guys who requested bung bolts they are on the way! If you did not get yours email Adam@rissracing.com. Thanks!
	Appreciate 0

09-07-2008, 10:13 PM	#18
Nate@IND BimmerPost Supporting Vendor 2868 Rep 11,374 Posts Drives: BMW Join Date: Oct 2006 Location: Chicago iTrader: (19)	We have these in stock and ready to ship __________________ IND DISTRIBUTION \| 866-963-4520 • FACEBOOK • INSTAGRAM • FLICKR
	Appreciate 0

09-09-2008, 03:05 PM	#19
GhOsT_E90 First Lieutenant 35 Rep 323 Posts Drives: 2008 BMW 335i E90 Join Date: May 2008 Location: Yelm, WA iTrader: (1) Garage List 2008 335i E90 [0.00]	Adam I sent you many PMs about my order and missing O2 sim. Please PM me back
	Appreciate 0

09-12-2008, 08:18 AM	#21
Riss Racing Banned 276 Rep 2,650 Posts Drives: E60 M5/E92 335/HUMMER H2 Join Date: Jun 2007 Location: Irvine, CA iTrader: (7)	Have a few left in stock! Thanks guys!
	Appreciate 0

09-17-2008, 02:54 PM	#22
Adam@Riss Racing Banned 79 Rep 1,310 Posts Drives: 2006 Interlagos Blue BMW M5 Join Date: Jul 2007 Location: Irvine, CA iTrader: (1) Garage List 2006 BMW M5 [0.00] 2004 Mercedes SL55 [0.00] 2005 Mercedes E55 ( ... [0.00] 2004 BMW M3 (sold) [0.00]	Grab some of the last batch guys! Re-ups will be in a couple weeks! Only a few left!
	Appreciate 0