[cgbimmer]

So I bought the walpro 295 without check valve .
and purchased a Quantum Inline highflow check valve.
I am first going to try without checkvalve less restriction less amps..
is anyone running one ?
if hard starts will install checkvalve.
in the meantime I want to order a relay and do it the better way with out spending 700.00 bm4 which looks great btw
main thing is I want to run better wires from ek3 to the pump then I saw a relay kit..
My biggest question is can I run this relay kit from battery to fuel pump 295
and cut the positive wire from ek3 that would run to fuel pump and run that wire to trigger 12v on relay which would in turn trigger full 12v and run like stock with upgraded wires .
any help and diagram of proper way would be great

[Boosted12a]

That will work fine but why are you running 2 + wires? Is this some kind of brushless Sooper pump? To simplify things I would just get a higher amp relay with 2 out puts. Then it's only 1 fuse and 1 + to the + terminal