[tom.gnade]

Since this thread has been revived from the dead, I just did this and I agree, it makes the car look so much better. I've definitely noticed cooler running temps too, no doubt about it.

[Cbozz]

Originally Posted by tom.gnade

Since this thread has been revived from the dead, I just did this and I agree, it makes the car look so much better. I've definitely noticed cooler running temps too, no doubt about it.

I always liked that look a lot! Looks great!

[jake1829]

Originally Posted by tom.gnade

Since this thread has been revived from the dead, I just did this and I agree, it makes the car look so much better. I've definitely noticed cooler running temps too, no doubt about it.

Is that a E92 pre lci bumper? How did you get the vents to sit inside?
thanks

[bimmerbro28]

What bumper is this? I'm diggin it.

[bimmerbro28]

Also, any codes from deleting the fog lights?

[Cbozz]

Originally Posted by bimmerbro28

Also, any codes from deleting the fog lights?

if you take the bulbs out you will get codes. The fog delete is describing coding the fog lights out - pretty much telling the car there should not be any fog lights so there is no errors triggered and cables are dead... that's the proper way of doing it.

[tom.gnade]

Originally Posted by Cbozz

if you take the bulbs out you will get codes. The fog delete is describing coding the fog lights out - pretty much telling the car there should not be any fog lights so there is no errors triggered and cables are dead... that's the proper way of doing it.

It's just the standard M sport LCI bumper with the dogs removed. I bought the splitters and the vents that attach behind it, just 4 parts. The car was in for work and the body shop did the install. Yes, I have an error code, will handle it later.

[Denny347]

Originally Posted by Cbozz

if you take the bulbs out you will get codes. The fog delete is describing coding the fog lights out - pretty much telling the car there should not be any fog lights so there is no errors triggered and cables are dead... that's the proper way of doing it.

When I changed out my front cover and installed air ducts, I tucked the foglights away so no errors would show up. I have since coded them out but too lazy to dig in there and remove them...haha

[esberelias]

I just bought an M SPORT bumper for my E92 LCI. My car has the standard non M bumper now

The bumper i bought is OEM and didn't come with any of the grills/mesh pieces so I have to order them.

I've decided to go NO FOG look (335is)

These are the parts i've compiled

Bumper Grill - Center - 51118047402
Air Duct Bracket - Left - 51118050623
Air Duct Bracket - Right - 51118050624
Lower Bumper Grille - Left - 51118050585
Lower Bumper Grille - Right - 51118050586
Adapter Strip - 51758044389.

anyone ever done this before? Do i have to order new break air ducts too for behind the bumper?

BTW I've removed my factory oil cooler and have went with an aftermarket cooler that sits behind the kidney grills now.

[philgli]

Originally Posted by esberelias

I just bought an M SPORT bumper for my E92 LCI. My car has the standard non M bumper now

The bumper i bought is OEM and didn't come with any of the grills/mesh pieces so I have to order them.

I've decided to go NO FOG look (335is)

These are the parts i've compiled

Bumper Grill - Center - 51118047402
Air Duct Bracket - Left - 51118050623
Air Duct Bracket - Right - 51118050624
Lower Bumper Grille - Left - 51118050585
Lower Bumper Grille - Right - 51118050586
Adapter Strip - 51758044389.

anyone ever done this before? Do i have to order new break air ducts too for behind the bumper?

BTW I've removed my factory oil cooler and have went with an aftermarket cooler that sits behind the kidney grills now.

your non-msport belly pan wont fit either. I am selling mine if you are interested....