$36 New Underbelly panel w/ pics and link!

stashtrey · 12-16-2015, 11:20 AM

My engine splash tray has been trashed for quite a while (E90 335xi pre LCI) and kept meaning to replace it but always get sidetracked and never order. Last week I cracked the shit out of it to the point of needing to replace it asap.*

After searching around online I found an incredibly cheap deal for a replacement rep. Not OEM but says direct fit replacement. Price right now is $37 + $6 shipping!!! That is about $100+ less than anywhere else I found one.

Here's a link....*

http://www.autopartswarehouse.com/sk...310113ATG.html

Got the new underbelly guard installed and it is damn near a pefect fit.*

Very solid, flexible, heavy duty plastic. A near direct match from OEM aside from a slight difference on the passenger side rear. This didn't affect fitmet and doesn't seem to be anything at all to worry about.*

It arrived in a much smaller box which immediately had me thinking they shipped the front part. To my surprise it was indeed in there but just folded in half. I was angry for a minute but it quickly flattened out and all was good.*

Install went pretty smooth aside from a little stretching needed in the rear passenger side to get the screw into its position. Took a fee extra minutes so not a big deal at all and I expected a tight fit.*

All other screw holes matched up neardly spot on. It formed well to all areas for a tight fit.*

I am extremely stoked with the purchase and it is nice to have that old, torn up piece off the car and full coverage down there.*

Some pics for reference. Link is in the OP. $36 is what is cost me including shipping....helluva deal!

Motorsport.Nick · 12-16-2015, 11:35 AM

Thanks for the info!

ferocity02 · 12-16-2015, 11:44 AM

Here is a working link: http://www.autopartswarehouse.com/se...0&addfitment=1

Looks like that's for XI only?

Mine looks like #2 in this diagram, I have an 07 335i E90: http://www.realoem.com/bmw/enUS/show...diagId=51_5860

stashtrey · 12-16-2015, 12:02 PM

Oh wow...I didn't notice it was only for the xi. Sorry about that!! Thanks for pointing that out. I will post in the xi forum.

Mods...can this be moved??

hz_diesel · 12-16-2015, 12:03 PM

is it the same part for lci? would be interested

N54Society · 12-16-2015, 05:10 PM

We should start a thread with other parts that can be replaced for cheap too.

Hpirx · 12-16-2015, 08:06 PM

Just ordered one also, Thanks! My indy was dragging their feet in figuring out which part it was. Not a real problem DD'ing, but got flagged at the track. Flopped around at higher speeds. Better to git it done before the sloppy weather really sets in, and ready for next year.

12-16-2015, 11:20 AM	#1
stashtrey Lieutenant Colonel 294 Rep 1,834 Posts Drives: 08 E90 335xi TiAg Join Date: Dec 2012 Location: Sacramento, CA iTrader: (8) Garage List 2008 E90 335xi Sedan [0.00]	$36 New Underbelly panel w/ pics and link! My engine splash tray has been trashed for quite a while (E90 335xi pre LCI) and kept meaning to replace it but always get sidetracked and never order. Last week I cracked the shit out of it to the point of needing to replace it asap.* After searching around online I found an incredibly cheap deal for a replacement rep. Not OEM but says direct fit replacement. Price right now is $37 + $6 shipping!!! That is about $100+ less than anywhere else I found one. Here's a link....* http://www.autopartswarehouse.com/sk...310113ATG.html Got the new underbelly guard installed and it is damn near a pefect fit.* Very solid, flexible, heavy duty plastic. A near direct match from OEM aside from a slight difference on the passenger side rear. This didn't affect fitmet and doesn't seem to be anything at all to worry about.* It arrived in a much smaller box which immediately had me thinking they shipped the front part. To my surprise it was indeed in there but just folded in half. I was angry for a minute but it quickly flattened out and all was good.* Install went pretty smooth aside from a little stretching needed in the rear passenger side to get the screw into its position. Took a fee extra minutes so not a big deal at all and I expected a tight fit.* All other screw holes matched up neardly spot on. It formed well to all areas for a tight fit.* I am extremely stoked with the purchase and it is nice to have that old, torn up piece off the car and full coverage down there.* Some pics for reference. Link is in the OP. $36 is what is cost me including shipping....helluva deal! Attached Images __________________ E90 2008 335xi - TiAg - AMS FMIC - BMW PE - BMS OCC - ER CP - KW V3 - Vorshlag Camber Plates - AG M359 18" PSS - Alpina Flash - RB PCV Valvle - AFE Intake - Walbro LPFP
	Appreciate 2 Tweet Quote

12-16-2015, 11:35 AM	#2
Motorsport.Nick Captain 162 Rep 689 Posts Drives: M Sedans Join Date: Oct 2010 Location: Portland iTrader: (0)	Thanks for the info! __________________ Nick \| 2011 Competition Package M3 Sedan \| @Restoration_Motorsport on IG
	Appreciate 0 Quote

12-16-2015, 11:44 AM	#3
ferocity02 Colonel 530 Rep 2,083 Posts Drives: 2013 135is Join Date: May 2014 Location: USA iTrader: (8)	Here is a working link: http://www.autopartswarehouse.com/se...0&addfitment=1 Looks like that's for XI only? Mine looks like #2 in this diagram, I have an 07 335i E90: http://www.realoem.com/bmw/enUS/show...diagId=51_5860 __________________ 2013 135is DCT Carbon Black Metallic
	Appreciate 0 Quote

12-16-2015, 12:02 PM	#4
stashtrey Lieutenant Colonel 294 Rep 1,834 Posts Drives: 08 E90 335xi TiAg Join Date: Dec 2012 Location: Sacramento, CA iTrader: (8) Garage List 2008 E90 335xi Sedan [0.00]	Oh wow...I didn't notice it was only for the xi. Sorry about that!! Thanks for pointing that out. I will post in the xi forum. Mods...can this be moved??
	Appreciate 0 Quote

12-16-2015, 12:03 PM	#5
hz_diesel Lieutenant Colonel 192 Rep 1,703 Posts Drives: 2012 E92 335ix Join Date: Jun 2015 Location: New England iTrader: (7)	is it the same part for lci? would be interested
	Appreciate 0 Quote

12-16-2015, 05:10 PM	#6
N54Society Major Private First Class 449 Rep 1,327 Posts Drives: 2010 E90 335i M Sport Join Date: Mar 2014 Location: US, NA, Earth, Milky Way Galaxy iTrader: (2)	We should start a thread with other parts that can be replaced for cheap too. __________________ 2008 E92 335i 6MT: FBO + MMP Silicone Inlets \| Stage 1 LPFP \| 335is clutch + MFactory SMFW \| Custom BuraQ + MHD tune \| 3.5Bar N20 sensor [SOLD] 2010 E90 335i M-Sport AT: 5" Stepped FMIC, Stage 2 LPFP - MHD V7 E60 Tune running 100% E85 - VRSF DPs
	Appreciate 0 Quote

12-16-2015, 08:06 PM	#7
Hpirx First Lieutenant 255 Rep 326 Posts Drives: 2022 M240 xDrive, BGM Join Date: Oct 2015 Location: Long Island iTrader: (0)	Just ordered one also, Thanks! My indy was dragging their feet in figuring out which part it was. Not a real problem DD'ing, but got flagged at the track. Flopped around at higher speeds. Better to git it done before the sloppy weather really sets in, and ready for next year.
	Appreciate 0 Quote