|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Transmission malfunction fault code after coding module
|
|
11-13-2023, 04:49 AM | #1 |
New Member
2
Rep 5
Posts |
Transmission malfunction fault code after coding module
Transmission malfunction fault code appears after programming attempting to match MASK/CCC vin with car.
2006 E90 330xi Hey can anybody help with this coding situation as well as coding vin to a module… While using winkfp to rewrite the vin to my MASK/CCC module…. as winkfp was processing I got an error message .. 2089 PABD switching programming mode failed 48CC6360, DIAGNOSE_MODE (ECUPM); ERROR_ECU_SECURI 7054 PABD clear Hash done - no answer from ECU [IFH 0009) but gateway o.k., no OPPS/Most 48CC6360, FLASH. 7054 ERROR clear flash done - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most SG_PROGRAMMIEREN 7054 ERROR clear flash done - no answer from ECU (IFH-0009) but gateway o.k., no OPPS/Most I’m not sure if I should just clear the code several times or if I’m doing something wrong????
__________________
????
|
Bookmarks |
|
|