Help! Broken cable connector to DMTL pump

bavaddict · 02-21-2014, 08:23 AM

Hello Ladies and Gentlemen:

Last night while installing a plastic underbody panel on the rear drivers side of my e92 335i coupe, I managed to somehow damage the cable connector that plugs into the DMTL aka Leak Diagnosis Pump as well as the pins inside the pump.

Attached is the pic of the pump that shows the connector I need.

Anyone know how to locate part number just for this connector? Can't seem to find anything on realoem.

Thanks.

Blackhawk36 · 02-21-2014, 09:10 AM

How badly is the plug damaged? They are usually repaired if it the metal female connectors. See here.

http://www.realoem.com/bmw/showparts...17&hg=61&fg=15

If you need the connector complete you will probably have to go to a salvage yard. Make sure you solder the connections. The DME would probably throw a code if you crimp them.

You could go to getbmwparts.com. Jason or Evan could help with a part number if it exists.

ddrew516 · 05-30-2021, 10:54 AM

Did you ever find this connector?

TunafishE93 · 05-30-2021, 01:46 PM

The plug is part number 61138365356 https://www.fcpeuro.com/products/bmw...IaAi_VEALw_wcB 100% on that... I am about 70% sure about the pins since they have different sizes, but the 0.2-0.5mm looks the most promising, part number 61130005199 https://www.fcpeuro.com/products/bmw...et-61130005199

02-21-2014, 08:23 AM	#1
bavaddict Lieutenant 51 Rep 443 Posts Drives: F32 435i MPerf Edit Join Date: May 2010 Location: East Coast iTrader: (0)	Help! Broken cable connector to DMTL pump Hello Ladies and Gentlemen: Last night while installing a plastic underbody panel on the rear drivers side of my e92 335i coupe, I managed to somehow damage the cable connector that plugs into the DMTL aka Leak Diagnosis Pump as well as the pins inside the pump. Attached is the pic of the pump that shows the connector I need. Anyone know how to locate part number just for this connector? Can't seem to find anything on realoem. Thanks. Attached Images
	Appreciate 0 Tweet Quote

02-21-2014, 09:10 AM	#2
Blackhawk36 Captain 30 Rep 644 Posts Drives: 2007 335i 6MT No iDrive Join Date: May 2009 Location: MD iTrader: (0)	How badly is the plug damaged? They are usually repaired if it the metal female connectors. See here. http://www.realoem.com/bmw/showparts...17&hg=61&fg=15 If you need the connector complete you will probably have to go to a salvage yard. Make sure you solder the connections. The DME would probably throw a code if you crimp them. You could go to getbmwparts.com. Jason or Evan could help with a part number if it exists.
	Appreciate 0 Quote

05-30-2021, 10:54 AM	#3
ddrew516 New Member 2 Rep 11 Posts Drives: 2009 E92 335i xDrive Join Date: Apr 2018 Location: New York iTrader: (0) Garage List 2009 Bmw 335i XDrive [0.00]	Did you ever find this connector?
	Appreciate 0 Quote

05-30-2021, 01:46 PM	#4
TunafishE93 Major 418 Rep 1,152 Posts Drives: BMW 335i Join Date: Dec 2019 Location: NV iTrader: (0)	The plug is part number 61138365356 https://www.fcpeuro.com/products/bmw...IaAi_VEALw_wcB 100% on that... I am about 70% sure about the pins since they have different sizes, but the 0.2-0.5mm looks the most promising, part number 61130005199 https://www.fcpeuro.com/products/bmw...et-61130005199
	Appreciate 0 Quote