What is 2D5A code mean

frenchie1013 · 11-18-2015, 05:07 PM

I googled obviously but everyone who has had this code has others to go along with it
I only have this code.
Not sure if I should be worried or not. I've cleared and it came back

Thanks in advance

frenchie1013 · 11-19-2015, 07:06 AM

?

N54Society · 11-19-2015, 10:05 AM

Did you find anything here?

http://www.e90post.com/forums/showthread.php?t=259817

frenchie1013 · 11-19-2015, 12:51 PM

Yes and all it says is ;

2D5A
2D5A Control motor torque limitation
Error will not cause a warning light (it did cause a limp)
Error is not currently present
Test conditions have been completed
EXPLANATION:
FIX:

Still doesn't mean anything to me.

Lshaw · 03-10-2016, 11:37 AM

Bump. Not too much information on this code. Just SES light while driving. Limp mode when the Vanos codes are thrown below.
Getting this code (2D5A Control motor torque limitation) along with 29F4, 29F5. SES light is probably from the catless dps with stock tune. But this tagged along with it from time to time. As well as the codes below.

Also in separate occasions, i am getting these codes....
2EE6, Cooling fluid sensor, measurement range

As well as Vanos codes, which i know are either clogged/failing.

2A87, Outlet Vanos variable cam control test, mechanics

29AA, Crank Shaft outlet camshaft, correlation

Hopefully the 29AA is resolved by exhaust vanos solenoid. WCS: my cam ledges show scoring, which then need to be replaced.

PNWN54 · 03-10-2016, 12:49 PM

Quote:

Originally Posted by frenchie1013

I googled obviously but everyone who has had this code has others to go along with it
I only have this code.
Not sure if I should be worried or not. I've cleared and it came back

Thanks in advance

Under what circumstances did you get this "limp mode"?

frenchie1013 · 03-12-2016, 07:37 AM

Quote:

Originally Posted by PNWN54

Quote:

Originally Posted by frenchie1013

I googled obviously but everyone who has had this code has others to go along with it
I only have this code.
Not sure if I should be worried or not. I've cleared and it came back

Thanks in advance

Under what circumstances did you get this "limp mode"?

Never got limp mode from this code.

Lshaw · 03-25-2016, 08:00 PM

Anyone have any input on this effing code?

BSM n54iS · 03-25-2016, 08:08 PM

Quote:

Originally Posted by Lshaw

Anyone have any input on this effing code?

THAT code isn't your problem:
http://www.***********.com/showthrea...ault-Code-List

Is a little bit down the page, but ignore the 2d5a code. You have other codes pointing to your issue

Lshaw · 03-25-2016, 08:35 PM

Quote:

Originally Posted by Black n54is

Quote:

Originally Posted by Lshaw

Anyone have any input on this effing code?

THAT code isn't your problem:
http://www.***********.com/showthrea...ault-Code-List

Is a little bit down the page, but ignore the 2fact code. You have other codes pointing to your issue

2D5A is a shadow code, it's irrelevant to the other codes I mentioned above.

AndyW · 05-02-2018, 06:19 PM

OP, did you ever resolve this? Getting this code and only this code.

frenchie1013 · 05-02-2018, 07:22 PM

Quote:

Originally Posted by AndyW

OP, did you ever resolve this? Getting this code and only this code.

Yes and no. I ended up flashing back to my tune and code is gone. Code only showed up when I flashed back to stock and had dp fix in place. Car never ran bad with the code.

AndyW · 05-02-2018, 08:42 PM

Quote:

Originally Posted by frenchie1013

Yes and no. I ended up flashing back to my tune and code is gone. Code only showed up when I flashed back to stock and had dp fix in place. Car never ran bad with the code.

Thx much! Maybe I'll do that...flash back to stock and then back to MHD stage 0. Would be nice if this was just a software glitch!

gunnerxq · 01-07-2019, 12:11 PM

Bump on the 2D5A code?
Only code there is. Any ideas what it is?
The monitors do not want to set.

TheMidnightNarwhal · 02-01-2019, 11:21 AM

Quote:

Originally Posted by gunnerxq

Bump on the 2D5A code?
Only code there is. Any ideas what it is?
The monitors do not want to set.

I have it aswell but I think it's because I reverted back to MHD Stage 0 as someone else mentioned in the thread.

Do you have any tune?

gunnerxq · 02-05-2019, 01:36 PM

Quote:

Originally Posted by TheMidnightNarwhal

I have it aswell but I think it's because I reverted back to MHD Stage 0 as someone else mentioned in the thread.

Do you have any tune?

It was reverted back to stock. It was some freak issue going on with the computer. The dealer replaced the dme.

moody8525 · 03-26-2019, 01:50 PM

Hey so I recently expirenced 2D5A usually without a paired code. I tested what could cause this from recent things i did. It seems that if you forget to change the jb4 map to 0, and flash a custom map with MHD, you'll get some funky codes. I tried and retried this with the jb4 map at 0 and at other maps and it seems to trigger random codes whenever you flash without it being at map 0.

The way i fixed it was to just reFlash my tune and making sure jb4 is on map0

N54ScoreAnd7BeersAgo · 07-04-2023, 01:58 AM

Anyone else have any suggestions? I don't even have JB4 so that's definitely not relevant in every case.

Code fires on its own, and I already flashed MHD back to stock. I am also getting a bit of unstable engine operation while maintaining speed or under very light acceleration. Like a very light jerking/sputtering feeling from the throttle response that goes away if I accelerate more or start slowing down.

New plugs and new eldor coils. It does almost feel like misfiring but no misfire codes.

Biggsie · 01-08-2024, 09:35 PM

Update please?

Quote:

Originally Posted by N54ScoreAnd7BeersAgo

Anyone else have any suggestions? I don't even have JB4 so that's definitely not relevant in every case.

Code fires on its own, and I already flashed MHD back to stock. I am also getting a bit of unstable engine operation while maintaining speed or under very light acceleration. Like a very light jerking/sputtering feeling from the throttle response that goes away if I accelerate more or start slowing down.

New plugs and new eldor coils. It does almost feel like misfiring but no misfire codes.

Jonnyweninger · 02-18-2024, 01:56 PM

Quote:

Originally Posted by N54ScoreAnd7BeersAgo

Anyone else have any suggestions? I don't even have JB4 so that's definitely not relevant in every case.

Code fires on its own, and I already flashed MHD back to stock. I am also getting a bit of unstable engine operation while maintaining speed or under very light acceleration. Like a very light jerking/sputtering feeling from the throttle response that goes away if I accelerate more or start slowing down.

New plugs and new eldor coils. It does almost feel like misfiring but no misfire codes.

Any updates on this? I’m having the same issues. Cad feels like it’s having a hard time around 1500-2000
rpm’s. Once i get on it, it drives fine

suspect · 02-18-2024, 04:18 PM

Quote:

Originally Posted by Jonnyweninger

Any updates on this? I’m having the same issues. Cad feels like it’s having a hard time around 1500-2000
rpm’s. Once i get on it, it drives fine

Log it when the problem happens and when it drives fine. Might help track down the problem.

11-18-2015, 05:07 PM	#1
frenchie1013 First Lieutenant 78 Rep 360 Posts Drives: sedan Join Date: May 2014 Location: CT iTrader: (0)	What is 2D5A code mean I googled obviously but everyone who has had this code has others to go along with it I only have this code. Not sure if I should be worried or not. I've cleared and it came back Thanks in advance __________________ 2010 335i Rwd 6spd MHD Wedge tune, VRSF Exhaust,FMIC, DP and CP, PR Inlets 2014 X5 50i BMS stage 1, Dinan intake, F85 Knee Bolsters
	Appreciate 0 Tweet Quote

11-19-2015, 07:06 AM	#2
frenchie1013 First Lieutenant 78 Rep 360 Posts Drives: sedan Join Date: May 2014 Location: CT iTrader: (0)	? __________________ 2010 335i Rwd 6spd MHD Wedge tune, VRSF Exhaust,FMIC, DP and CP, PR Inlets 2014 X5 50i BMS stage 1, Dinan intake, F85 Knee Bolsters
	Appreciate 0 Quote

11-19-2015, 10:05 AM	#3
N54Society Major Private First Class 449 Rep 1,327 Posts Drives: 2010 E90 335i M Sport Join Date: Mar 2014 Location: US, NA, Earth, Milky Way Galaxy iTrader: (2)	Did you find anything here? http://www.e90post.com/forums/showthread.php?t=259817 __________________ 2008 E92 335i 6MT: FBO + MMP Silicone Inlets \| Stage 1 LPFP \| 335is clutch + MFactory SMFW \| Custom BuraQ + MHD tune \| 3.5Bar N20 sensor [SOLD] 2010 E90 335i M-Sport AT: 5" Stepped FMIC, Stage 2 LPFP - MHD V7 E60 Tune running 100% E85 - VRSF DPs
	Appreciate 0 Quote

11-19-2015, 12:51 PM	#4
frenchie1013 First Lieutenant 78 Rep 360 Posts Drives: sedan Join Date: May 2014 Location: CT iTrader: (0)	Yes and all it says is ; 2D5A 2D5A Control motor torque limitation Error will not cause a warning light (it did cause a limp) Error is not currently present Test conditions have been completed EXPLANATION: FIX: Still doesn't mean anything to me. __________________ 2010 335i Rwd 6spd MHD Wedge tune, VRSF Exhaust,FMIC, DP and CP, PR Inlets 2014 X5 50i BMS stage 1, Dinan intake, F85 Knee Bolsters
	Appreciate 0 Quote

03-10-2016, 11:37 AM	#5
Lshaw Lieutenant Colonel 251 Rep 1,869 Posts Drives: 09 335i 6mt Join Date: Oct 2007 Location: NYC/Pittsburgh iTrader: (21)	Bump. Not too much information on this code. Just SES light while driving. Limp mode when the Vanos codes are thrown below. Getting this code (2D5A Control motor torque limitation) along with 29F4, 29F5. SES light is probably from the catless dps with stock tune. But this tagged along with it from time to time. As well as the codes below. Also in separate occasions, i am getting these codes.... 2EE6, Cooling fluid sensor, measurement range As well as Vanos codes, which i know are either clogged/failing. 2A87, Outlet Vanos variable cam control test, mechanics 29AA, Crank Shaft outlet camshaft, correlation Hopefully the 29AA is resolved by exhaust vanos solenoid. WCS: my cam ledges show scoring, which then need to be replaced. __________________ 07 335xi (2007-2010) 08 Legacy Spec B (08-) 09 335i (2010-) 15 X5 xdrive 35i (2015-) 17 Forester XT (2016-) Last edited by Lshaw; 03-10-2016 at 01:49 PM..
	Appreciate 0 Quote

03-25-2016, 08:00 PM	#8
Lshaw Lieutenant Colonel 251 Rep 1,869 Posts Drives: 09 335i 6mt Join Date: Oct 2007 Location: NYC/Pittsburgh iTrader: (21)	Anyone have any input on this effing code? __________________ 07 335xi (2007-2010) 08 Legacy Spec B (08-) 09 335i (2010-) 15 X5 xdrive 35i (2015-) 17 Forester XT (2016-)
	Appreciate 0 Quote

05-02-2018, 06:19 PM	#11
AndyW Supreme Galactic Commander (one galaxy over...) 668 Rep 1,777 Posts Drives: '08 E93, '12 E82, '13 E93 M3 Join Date: Feb 2012 Location: Washington, USA iTrader: (5)	OP, did you ever resolve this? Getting this code and only this code. __________________ Best, Andy '12 E82-PS2,Stoptechs,Clubsports+M3 bits,Accusump,Wagner DP+EVO III FMIC,ERCP,BMS Intake,Mason Strut Bar,Wedge Tune
	Appreciate 0 Quote

01-07-2019, 12:11 PM	#14
gunnerxq Lieutenant Colonel 213 Rep 1,780 Posts Drives: e90 "325i" Join Date: Sep 2010 Location: New York iTrader: (1)	Bump on the 2D5A code? Only code there is. Any ideas what it is? The monitors do not want to set.
	Appreciate 0 Quote

03-26-2019, 01:50 PM	#17
moody8525 Registered 0 Rep 1 Posts Drives: 2010 Bmw 335i xdrive Join Date: Mar 2019 Location: Metro Detroit iTrader: (0)	Hey so I recently expirenced 2D5A usually without a paired code. I tested what could cause this from recent things i did. It seems that if you forget to change the jb4 map to 0, and flash a custom map with MHD, you'll get some funky codes. I tried and retried this with the jb4 map at 0 and at other maps and it seems to trigger random codes whenever you flash without it being at map 0. The way i fixed it was to just reFlash my tune and making sure jb4 is on map0
	Appreciate 0 Quote

07-04-2023, 01:58 AM	#18
N54ScoreAnd7BeersAgo New Member 3 Rep 13 Posts Drives: 2008 BMW 335i Coupe--MT, Sport Join Date: Oct 2021 Location: Port Orchard, WA iTrader: (0)	Anyone else have any suggestions? I don't even have JB4 so that's definitely not relevant in every case. Code fires on its own, and I already flashed MHD back to stock. I am also getting a bit of unstable engine operation while maintaining speed or under very light acceleration. Like a very light jerking/sputtering feeling from the throttle response that goes away if I accelerate more or start slowing down. New plugs and new eldor coils. It does almost feel like misfiring but no misfire codes.
	Appreciate 0 Quote