[Schmidty335i]

Anyone who knows... i emailed spool performance for a update of my BEF to use the HPFP that i got from them but i havent heard back. does anyone know if i install it and select either the dorch or xdi on the mhd option if it will work?

[Schmidty335i]

If anyone is searching like i was... it does work if you just select one of the other HPFP options. works like a champ

[ferocity02]

Might want to double check that the settings are correct. Doesn't make sense they wouldn't add spool as an option if its settings are the same as the others.

[Schmidty335i]

Originally Posted by ferocity02

Might want to double check that the settings are correct. Doesn't make sense they wouldn't add spool as an option if its settings are the same as the others.

Yeah i was thinking the same thing. before i did it i contacted spool and MHD spool told me that it would work if i just selected either the dorch or xdi option on MHD. Then after i installed it MHD told me that it wouldnt work and they are coming out with a spool option shortly. By then i had already installed it and chose the XDI HPFP as the option and it started right up.

On 91oct anything over 16psi i would get a misfire after installing the new HPFP there are no misfires at all. i even went and put some e85 in and up'd the boost to 21 and no misfires still and that is at E54 according to my ethanol sensor.

all in all very happy with it, wish i would have done it sooner.

[Bowenpuref3p]

Originally Posted by Schmidty335i

Yeah i was thinking the same thing. before i did it i contacted spool and MHD spool told me that it would work if i just selected either the dorch or xdi option on MHD. Then after i installed it MHD told me that it wouldnt work and they are coming out with a spool option shortly. By then i had already installed it and chose the XDI HPFP as the option and it started right up.

On 91oct anything over 16psi i would get a misfire after installing the new HPFP there are no misfires at all. i even went and put some e85 in and up'd the boost to 21 and no misfires still and that is at E54 according to my ethanol sensor.

all in all very happy with it, wish i would have done it sooner.

Im wondering if you are still running the spool hpfp with the xdi/dorch hpfp option checked in MHD? I'm in the same boat right now and spools fx150 will cover my fueling needs but if I went xdi-35 or dorch stg1 hpfp I would be right at the limit. So cost/flow wise the fx150 is a perfect option for me but only if I can just check xdi/dorch in MHD and not have to mess with getting a tuner to set up the parameters individually.

[ferocity02]

They are working on adding the FX-150 as an option in MHD, but Spool told me that the Dorch option would work too. I suspect they use the same exact settings since all of these high flow bumps are just modified Bosch units.