|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Non-iDrive to CIC Retrofit Completed - Have Question About Determining Firmware
|
|
11-15-2020, 02:39 PM | #1 |
New Member
4
Rep 21
Posts |
Non-iDrive to CIC Retrofit Completed - Have Question About Determining Firmware
I have successfully retrofitted a CIC system into my 2009 328i Xdrive Sedan.
I am currently using an emulator.I have coded in Voice Activation and it is working fine. I have pulled my 1B file and used the FSC generator to update to 2021 maps, coded Sirius Satelite Radio and have it running fine as well. I am using an ebay BT box for streaming that I had connected to my old professional HU and it is working fine as well. At some point, I'd like to swap to a combox and set up BMW Apps, BT Streaming (removing my ebay box and the emulator in the process) etc. I know I need to be on C1a firmware to be able to unlock this stuff. When I pull up the CIC unit using NCS expert under JOBNAME = SG_CODIEREN my CIC shows up as: CIC.C08,A_CIC.IPO,CICR.PRG If I change jobs to READ ECU under JOBNAME = CODIERDATEN_LESEN, my CIC shows up as: CIC.C1A,A_CIC.IPO,CICR.PRG. Which firmware am I actually running based on this information? Last edited by vibroluxious; 11-15-2020 at 02:48 PM.. |
11-16-2020, 06:52 PM | #3 | |
New Member
4
Rep 21
Posts |
Quote:
Thanks for the confirmation. Last edited by vibroluxious; 11-17-2020 at 05:32 PM.. Reason: edited because apparently I shouldn't post at 4AM... |
|
Appreciate
0
|
Bookmarks |
|
|