[MAD]

Hello from Spain!! I have a question after add a Slash 500/1 on my audio system 330d E90.
Here is rest of components:

Pioneer DEH-X8700BT

Front: Audio System X200bmw-plus (2 separated ways + 2 subs 8” 2ohm (150w rms each)
Rear: 4 ways stock speaker
Sub: JL Audio 10W3-4
Amps: JL Audio XD600/6 and JL Audio Slash 500/1


I actually powered the 2 8” subs with 2 channel of de XD600 givind around 200wrms for both subs and I think not enought power for them.

I am thinking to power both 8”subs (2ohms) + 10W3 (4ohms) only with the Slash 500/1.

Anybody knows if its posible?
Do the Slash work correcly?

Thanks a lot!!

Kind regards

[mweisdorfer]

Originally Posted by MAD

Hello from Spain!! I have a question after add a Slash 500/1 on my audio system 330d E90.
Here is rest of components:

Pioneer DEH-X8700BT

Front: Audio System X200bmw-plus (2 separated ways + 2 subs 8" 2ohm (150w rms each)
Rear: 4 ways stock speaker
Sub: JL Audio 10W3-4
Amps: JL Audio XD600/6 and JL Audio Slash 500/1


I actually powered the 2 8" subs with 2 channel of de XD600 givind around 200wrms for both subs and I think not enought power for them.

I am thinking to power both 8"subs (2ohms) + 10W3 (4ohms) only with the Slash 500/1.

Anybody knows if its posible?
Do the Slash work correcly?

Thanks a lot!!

Kind regards

Is the 500/1 one channel?

You are better off getting a 4 channel + 1 amp

Just make sure the rms of the channels matches the rms of your subs

[ctuna]

2ohm underseats will draw 100 watts a channel that should be plenty, out of an xd 600/6



https://www.e90post.com/forums/showthread.php?t=1321625

You will have to run the above through Google translate unless you are German

[E92x7z]

nonsense
101 %