PROcede v4 User software Wish List

Amlethae · 01-13-2011, 12:07 PM

Quote:

Originally Posted by shiv@vishnu

With the n55 Procede, the CAN network is being polled for data even with the engine not running. This was necessary in order to retain the throttle pump code read/clear feature. But we can accommodate coding by simple offering a no-CAN mode which we can include in the next update/release.

None of this is applicable to the n54 which disables all CAN communications when the engine isn't running, regardless of what map is active.

Shiv

Sorry to be a PITA about this, but any word on when this feature will be released?

Amlethae · 01-14-2011, 05:29 PM

Quote:

Originally Posted by Calvin@Vishnu

Happy New Years Guys!

Amiethai is correct. The N55, unlike the n54, doesn't disable CAN communications when in Valet Mode and engine off. This can be changed easily. So expect an option to disable all Procede CAN activity with the next update coming out next week.

-C

Any news on this ability? With all the snow around, coding is about all I could do if the Procede wasn't stopping me

e93ro · 01-25-2011, 06:06 AM

Going to install some lightweight racing front seats into my heavy e93, is there any possibility procede to clear codes from seat-airbags, seatbelts, aso ? Or maybe with BT software ?

AltecBX · 03-25-2011, 09:12 AM

- Command Center control while driving -

Amlethae · 03-25-2011, 03:37 PM

Quote:

Originally Posted by Calvin@Vishnu

Happy New Years Guys!

Amiethai is correct. The N55, unlike the n54, doesn't disable CAN communications when in Valet Mode and engine off. This can be changed easily. So expect an option to disable all Procede CAN activity with the next update coming out next week.

-C

So what's the word on this? I haven't bugged you guys for a while now, but it's been months. There's a lot of great stuff going on in the coding world and I really want to jump back into it, but the N55 Procede is too much of a PITA to take out every time I get the urge to change a value in my system.

DaFish · 03-27-2011, 09:00 AM

I started this in another thread ... but it really should go in this one....

Hi Shiv, I had a thought, not sure if this has been discussed or even whether it is part of the Procede V5 now....

THere is a button on my 335i steering wheel that changes the source for the stereo. I never use it.

Is there anyway you could reprogram this button to a kind of "M" button and to do the following:

1) change the map to a higher boost from what ever map was there
2) Maybe turn on Meth....
3) not sure if you can do this but turn DSC to the first or second position (fully off) based on what the driver wants
4) turn on shift lights
5) change gas guage to boost guage

this would be cool....

So if just commuting... car on low boost map, gas guage reading gas, no shift lights on blinkers... maybe no meth.....and DSC ON

hit the button
Big boost, meth, shift lights, boost guage, DSC OFF - BIG FUN !!

Kind of like a macro button that sets a bunch of user parameters set in the software when hooked up to a laptop... Is this possible?

OpenFlash · 03-27-2011, 12:24 PM

Quote:

Originally Posted by Amlethae

So what's the word on this? I haven't bugged you guys for a while now, but it's been months. There's a lot of great stuff going on in the coding world and I really want to jump back into it, but the N55 Procede is too much of a PITA to take out every time I get the urge to change a value in my system.

This next update we are working on now is going to give you a CAN disable in the user adjustable menu. Should be released something this upcoming week.

Shiv

Amlethae · 03-27-2011, 12:35 PM

Quote:

Originally Posted by shiv@vishnu

This next update we are working on now is going to give you a CAN disable in the user adjustable menu. Should be released something this upcoming week.

Shiv

:happy anim:

AltecBX · 05-24-2011, 01:01 AM

- Incorporating DIC and non-DIC maps together in one map file. (So we can have the option to enable Map 1 DIC & Map 2 non-DIC)

- A channel for Procede users to display the DME version we currently run on the Procede software

01-25-2011, 06:06 AM	#179
e93ro Private 8 Rep 83 Posts Drives: 335i E93 Join Date: May 2010 Location: Europe iTrader: (0)	Going to install some lightweight racing front seats into my heavy e93, is there any possibility procede to clear codes from seat-airbags, seatbelts, aso ? Or maybe with BT software ? __________________ Procede V5, AMS FMIC, AR c-less DPs & Borla exhaust, DCI, CDV, STETT Charge Pipe+BOV, KW CoilOvers, CMGS Meth kit CM10, AR additional oil cooler, Quaife LSD, TD stage 1 turbo upgrade, RIX Gauge, ACT street clutch
	Appreciate 0 Quote

03-25-2011, 09:12 AM	#180
AltecBX Colonel 324 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	- Command Center control while driving - __________________ 335xi Sedan 6AT \| Weather(70-85°F) \| N54 Tune Comparison Chart \|\| N54 Turbo Upgrade Comparison Chart -PROcede Rev. 2.5 ~ v5 (3/17 maps) / JB4 (8/21 maps) / COBB (Stg2+FMIC LT Aggressive maps) †Procede Map2(UT 45 - IGN 40) Aggression Target 2.0 \| 0-60 in 4.0sec \|\| †Cobb E30 LT (35% Ethanol/65% 93 Octane) \| 0-60 in 3.9sec AR Design Catless DP \| BMS DCI + OCC \| ETS 5 FMIC \| Alpina B3 Trans Flash \|235/265 19" Michelin PSS
	Appreciate 0 Quote

03-27-2011, 09:00 AM	#182
DaFish Major 158 Rep 1,288 Posts Drives: 2014 435iX, FBO Join Date: Mar 2009 Location: Ontario, Canada iTrader: (0) Garage List 2014 BMW 435i Xdrive [0.00]	I started this in another thread ... but it really should go in this one.... Hi Shiv, I had a thought, not sure if this has been discussed or even whether it is part of the Procede V5 now.... THere is a button on my 335i steering wheel that changes the source for the stereo. I never use it. Is there anyway you could reprogram this button to a kind of "M" button and to do the following: 1) change the map to a higher boost from what ever map was there 2) Maybe turn on Meth.... 3) not sure if you can do this but turn DSC to the first or second position (fully off) based on what the driver wants 4) turn on shift lights 5) change gas guage to boost guage this would be cool.... So if just commuting... car on low boost map, gas guage reading gas, no shift lights on blinkers... maybe no meth.....and DSC ON hit the button Big boost, meth, shift lights, boost guage, DSC OFF - BIG FUN !! Kind of like a macro button that sets a bunch of user parameters set in the software when hooked up to a laptop... Is this possible? __________________ 2020 M2 Competition HS, DCT, 763s, Carbon: splitter, side skirt, grill, diffuser, wing Previous: 2014 BMW F32 435iX - JB4, MHD Flash, BMS Meth Kit, ER Intercooler, intake, catless DPs, KW Streets, 437M Reps with 245/35 and 275/30 Michelin PSS 4S
	Appreciate 0 Quote

05-24-2011, 01:01 AM	#185
AltecBX Colonel 324 Rep 2,663 Posts Drives: BMW 335xi Sedan; BMW M3 ZCP Join Date: Nov 2007 Location: NYC iTrader: (0) Garage List 2018 BMW M3 ZCP [0.00] 2007 BMW 335Xi [0.00]	- Incorporating DIC and non-DIC maps together in one map file. (So we can have the option to enable Map 1 DIC & Map 2 non-DIC) - A channel for Procede users to display the DME version we currently run on the Procede software
	Appreciate 0 Quote