|
|
|
|
|
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Horrible Overboost Target 18 Actual 29
|
|
07-15-2020, 03:14 PM | #1 |
Member
41
Rep 102
Posts |
Horrible Overboost Target 18 Actual 29
Hi all. Yesterday I got a new intake manifold and put it on because the holes in my previous one that sat the throttle body bolts were stripped.
After putting everything back together I cleared all the codes and started the car. The moment I drove out the car stalled randomly at a stop sign. Every time little throttle was applied in first gear the car would die out unless you gave it more. I checked the codes and got an overboost code. I removed and plugged back in all MAF/TMAP/Absolute pressure sensors and drove to log. I drove on an 8 psi map and the log I got showed a lot of flunctuation of overboost past the target. So I thought to try an OTS MHD Stage 2+ map and see what would happen with more boost. Keep in mind I have a pure stage 2 so I know the map has horrid timing and wgdc targets but I did it for testing sake and because I don’t have a custom tune for pump gas. After doing a pull the map targeted 16 and overboosted TO 29PSI before my car cut power completely for a second. I checked all vacuum lines, I cleaned all sensors. The throttle body and manifold are both torqued to spec. I’m lost right now. This never happened before. A crack in the manifold? It was used but I visually inspected and cleaned everything before putting it on https://datazap.me/u/n55rei/log-1594...og=0&data=3-10
__________________
12' 335i xDrive
Pure Stage 2 11.4s@120mph (Full Weight + 50lb ea wheel on street) // E30 Wedge Performance |
07-15-2020, 03:59 PM | #2 |
New Member
3
Rep 8
Posts
Drives: 2011 335i BMW
Join Date: Mar 2020
Location: Riverside, CA
|
Myself and a few others who are on MHD 2+ OTS are getting massive overboost as well.
Provided MHD a log but have yet to hear back. Car behaves normally if MHD is removed completely. Do you have a log from 2+?
__________________
2011 E90 335i - ER Charge Pipe - VRSF HD 5" FMIC - MHD Stage 2+ - GFB DV+ - VRSF Race Exhaust - VRSF Catless Downpipe - VRSF TIC
|
Appreciate
0
|
07-15-2020, 04:49 PM | #3 |
Captain
257
Rep 674
Posts |
I have stock turbo, but here you go:
https://datazap.me/u/thegoodthebadth...=0&data=4-5-21 https://datazap.me/u/thegoodthebadth...=0&data=4-5-20 At 28 PSI my car chokes as if it misfires. This never used to happen with earlier versions of MHD OTS Maps. At least you have Pure Stage 2 so it's worth and essential for you to go with a custom tune. But for my part, spending 450$ (CAD) for a custom tune with no assurance it will fix my issue is complete shit.
__________________
TOTALED | 2011 E90 335i xDrive - BMS Cold Air Intake - ETS Charge Pipe - ETS 7" FMIC - MHD Stage 2+ - GFB DV+ - PE Mod - VRSF Catless Downpipe - xDelete - xHP Stage 3
2015 E84 X1 35i M-Sport |
Appreciate
0
|
07-15-2020, 05:29 PM | #4 |
Member
41
Rep 102
Posts |
https://datazap.me/u/n55rei/log-1594792066?log=0&data=3-4-10&zoom=636-863
|
Appreciate
0
|
07-17-2020, 02:25 AM | #5 |
Member
41
Rep 102
Posts |
Fixed my issue. Replaced boost solenoid and also relieved my wastegate vacuum line from its metal clip as it looked like it was being pinched by it. I dont know which one fixed it but no more overboosting or oscillations.
__________________
12' 335i xDrive
Pure Stage 2 11.4s@120mph (Full Weight + 50lb ea wheel on street) // E30 Wedge Performance |
Appreciate
1
fmarsjr7.00 |
07-17-2020, 04:33 AM | #6 |
New Member
3
Rep 8
Posts
Drives: 2011 335i BMW
Join Date: Mar 2020
Location: Riverside, CA
|
I replaced all vacuum lines and boost solenoid from fcp. Didnt fix the issue for me.
Do you have the gfb dv+? If so do you have the extra spring installed? |
07-19-2020, 08:51 PM | #7 | |
Member
41
Rep 102
Posts |
Quote:
I was pretty lost when trying to resolve it but I was thinking of checking my cp connections because a boost leak could cause overboosting after a certain pressure |
|
Appreciate
0
|
Bookmarks |
|
|