E90Post
 


Studio RSR
 
BMW 3-Series (E90 E92) Forum > E90 / E92 / E93 3-series Powertrain and Drivetrain Discussions > NA Engine (non-turbo) / Drivetrain / Exhaust Modifications > Loud rapid tapping sound above 35 mph



Reply
 
Thread Tools Search this Thread
      08-03-2018, 04:06 AM   #1
longtermproject
Enlisted Member
9
Rep
41
Posts

Drives: 2006 325i e90
Join Date: Feb 2015
Location: Wilmington, OH.

iTrader: (0)

Loud rapid tapping sound above 35 mph

2006 325i automatic 130k miles

(Issue)
Started noticing a loud tapping sound that sounds like its coming from the firewall area. Its loud enough that you can hear it over the radio played at normal listening volume.
Air conditioning turned off, the noise starts when I hit 35 mph, and increases with speed, but stops when I slow down below 35 mph.

(What I've found so far)
So far, I found 1 bolt missing in the under shield on the chassis, probably from when a shop removed it to clean after replacing a broken timing cover bolt. The valve cover plastic piece appears to be missing several of the bolts as well, it seems to move quite a bit when I wiggle it.

Has anyone experienced anything like this?
Appreciate 0
      08-04-2018, 04:02 PM   #2
longtermproject
Enlisted Member
9
Rep
41
Posts

Drives: 2006 325i e90
Join Date: Feb 2015
Location: Wilmington, OH.

iTrader: (0)

Adding to what I've done to figure out what this issue is:

Removed the plastic engine cover, still hearing the noise though it sounds like its slightly less severe.

- No check engine lights
- Nothing appears loose in the engine bay

Noise is still occurring at 30+ mph;
- putting in neutral has no affect
- revving engine has no affect
- ac on/off has no affect

I'm completely lost as to the sound. Would it be more helpful if I uploaded dash cam footage so you guys can hear it?
Appreciate 0
      08-04-2018, 04:38 PM   #3
Noir
Major
Noir's Avatar
United_States
883
Rep
1,413
Posts

Drives: 2006 E90 330i 6MT
Join Date: Aug 2016
Location: San Antonio

iTrader: (1)

check the heat shield
maybe hitting the drive shaft
__________________
See you, space cowboy.
Supercharged
Appreciate 0
      08-04-2018, 04:58 PM   #4
desertman123
E82 Mudflap Ambassador
desertman123's Avatar
United_States
2212
Rep
2,219
Posts

Drives: '08 128i
Join Date: May 2016
Location: Orlando, FL

iTrader: (0)

Garage List
1992 Honda Beat  [9.50]
2008 BMW 128i  [10.00]
2014 BMW 528i  [10.00]
Quote:
Originally Posted by Noir View Post
check the heat shield
maybe hitting the drive shaft
Make sure no one zip tied your drive shaft lmao
Attached Images
 
__________________
My 2008 128i - Sparkling Graphite/Beige - Sport pkg - 6MT - Click me!
Parents' 2014 528i - Mineral White/Ivory White - fully loaded
Instagram @Andreys_128i and @Honda.Bito
Appreciate 1
gT-BMW203.00
      08-04-2018, 05:17 PM   #5
Wolf 335
Brigadier General
Wolf 335's Avatar
Canada
2339
Rep
3,538
Posts

Drives: 2007 E92 335i
Join Date: Aug 2012
Location: GTA - Greater Toronto Area

iTrader: (0)

Drive shaft hanger bearing.

Number 7 in diagram.

Name:  09991249-1B76-4650-BD8C-E304764D42EC.jpeg
Views: 2457
Size:  118.8 KB
Appreciate 0
      08-04-2018, 07:12 PM   #6
Noir
Major
Noir's Avatar
United_States
883
Rep
1,413
Posts

Drives: 2006 E90 330i 6MT
Join Date: Aug 2016
Location: San Antonio

iTrader: (1)

Quote:
Originally Posted by desertman123 View Post
Quote:
Originally Posted by Noir View Post
check the heat shield
maybe hitting the drive shaft
Make sure no one zip tied your drive shaft lmao
LOL
when I had my clutch done, that might as well have been the setup. Heat shield was hanging off and making scary noises
__________________
See you, space cowboy.
Supercharged
Appreciate 0
      08-04-2018, 07:54 PM   #7
Phyrexia
Resident Pedant
United_States
503
Rep
792
Posts

Drives: '15 335i 8AT
Join Date: Nov 2017
Location: Limbo

iTrader: (1)

I still think it's something flapping. If it was related to a rotating assembly it would change frequency with respect to either engine or wheel speed, but it doesn't.
__________________
'15 F30 335i 8AT Estoril II/Black (12.218 @ 114.94mph)
MHD Stage 2+ 93 / XHP Stage 3 / M-Goodies / K&N Filter / ER CP / CSF IC / NGK 97506 / ER DP / Michelin A/S 3+
Appreciate 0
      08-08-2018, 03:23 AM   #8
longtermproject
Enlisted Member
9
Rep
41
Posts

Drives: 2006 325i e90
Join Date: Feb 2015
Location: Wilmington, OH.

iTrader: (0)

I have results!

It was the upper windshield molding. Sometime over the course of a couple days, the middle of the windshield moulding cracked and caused the flapping. Its amazing that the sound definitely appeared to be coming from the engine bay. Thanks for everyones help!
Appreciate 2
Wolf 3352338.50
      12-09-2020, 01:30 PM   #9
Milehighbmw
New Member
2
Rep
21
Posts

Drives: 07 335xi
Join Date: Mar 2018
Location: Colorado

iTrader: (0)

OMG.......This same thing just happened to me. I'm traveling from Colorado to Florida. I started hearing this tapping noise. I creeped to the nearest exit. Started inspecting everything opened the hood lifted the car to get underneath spent 2 1/2 hours. Found this thread and rolled my eyes. Found a 3 inch piece of windshield strip loose. Still didn't believe it. Drove down the street and the noise is gone.

I went as far as checking my torque converter bolts swearing the noise was coming from the transmission area. Crazy.......
Appreciate 0
      03-31-2021, 08:35 AM   #10
NickU252
Registered
0
Rep
2
Posts

Drives: 2010 BMW 335i xDrive
Join Date: Jul 2019
Location: North Carolina

iTrader: (0)

I just had the same thing happen, I thought the fan belt was frayed and whipping around the engine compartment. I stopped to check and limped it home thinking it was a mechanical problem. Popped open the computer to find this thread, ran outside and sure enough, the window gasket was dry rot and loose. I'm so glad that it wasn't something expensive.
Appreciate 0
      05-25-2021, 07:11 AM   #11
2007Frank328i
New Member
0
Rep
6
Posts

Drives: BMW 328i
Join Date: May 2021
Location: SC

iTrader: (0)

loud tapping noise

So glad i found this post, i never would have believed it. Same happened to me. Loud, scary tapping noise at 65 mph and up. Sounded like it was under the hood. Checked and secured everything. Even went under the car. Removed the old wind shield molding and viola, all is well.
Appreciate 0
      08-27-2022, 12:51 PM   #12
Spaininator
Registered
0
Rep
3
Posts

Drives: 2004 BMW 530i
Join Date: Aug 2022
Location: Alabama

iTrader: (0)

This thread just saved me a bunch of time and money. I've been stressing all week investigating under the hood trying to figure out why I was hearing slapping coming from the dash/firewall. It only happened when I let off the gas, evertime I accelerated it would go away. Makes sense why I couldn't recreate it while parked. It just started up after I had it serviced too, so I thought someone messed up by using a wrong filter or oil type.
Appreciate 0
      08-27-2022, 04:04 PM   #13
Donethat
Private First Class
Donethat's Avatar
338
Rep
141
Posts

Drives: 10’ 328 Msport w/ESS huffer
Join Date: Nov 2017
Location: 305

iTrader: (2)

I had the same thing happen on the expressway, sounded like steel balls let loose in the motor. Only to be 5” of windshield moulding flapping around.
__________________
IG. e92awchris
Appreciate 0
Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:18 AM.




e90post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST